• Water based tire shine
• Non-greasy dressing safe for all tires
• Gel formula eliminates over spray on wheels and paint
• Apply directly on towel or applicator and then on tires

When it comes to detailing cars, most people want the same 4 basic things:

1. Shiny paint.
2. Clear glass.
3. Clean and fresh smelling interior.
4. Black, shiny tires.

It’s really that simple. But when it comes to tires, there are so many tire dressings on the market, and most are incredibly messy, gooey, greasy, and slimy. Plus, they sling onto your lower body panel, don’t last very long and turn your tires into dirt magnet.

When creating a tire dressing, the chemists at 3D don’t start with the dressing, they start with the tire. More specifically, how the rubber is made or formulated to create a tire. Tire rubber formulations are very complex. Think about it, they must endure a LOT of torsional flex, high rpms for hours and thousands and thousands of hard miles. It’s a miracle we get as many miles out of our tires like we do.

Besides tire rubber being complex in its own right, there are multiple tire manufacturers around the world and each company has their own unique tire products, often times very different from their competitors.

The formula for 3D SPEED Dressing was formulated starting with the chemical composition and structural formation for the end results of the tire manufacturing process. The results are a super high gloss, high shine formula that is water-based, while offering the long-lasting features of most solvent and oil-based dressings – but without the mess. Here at 3D, we understand some people like a non-glossy, dark black matte sheen for their tires, but even more people love it when their tires look as though they’re liquid wet with shine. If this describes you, you’re going to love 3D SPEED Dressing.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - Super high gloss, water-based tire dressing.

What does it do? - Gives tires a high gloss, wet-looking deep, dark black shine.

When do you use it? - After first thoroughly cleaning the tires with a dedicated tire cleaner, all-purpose-cleaner or degreaser.

Why use 3D Speed Dressing over other options? - Besides the fact that the formula for this tire dressing is made from the most costly ingredients and fine tuned to the very specific needs and characteristics for tire rubber – here at 3D, we’re car people too and we were just as tired of disappointing tire dressing as everyone else.

• Super high shine, high gloss tire dressing!
• UV protection protects against oxidizing and tire browning.
• Makes any tire look deep, dark black and shiny.
• Non-greasy, non-oily no mess dressing for tires and trim.
• Simple wipe-on, wipe-off application – Fast and user friendly
• Dries to the touch – will not become dirt and dust magnet.
• Waterproof dressing repels rain holds-up to repeated car washing.
• Thick, rich formula penetrates & rejuvenates dull, lifeless looking tires and trim.
• Water-based formula can be used on rubber, vinyl, and even coated leather.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant

• Water resistant tire shine
• Repels rain and water on wet roads for long lasting tire shine and protection
• Use on different plastic surfaces
• Easy spray and wipe formula

When we named this product, we really needed to find a way to let you know this dressing work almost like magic. Of course, the results from any car detailing job starts with the correct prep-work. But after the prep work and you apply this dressing, that’s where you see the magic! And that’s how we came up with the name – 3D Blue Magic Dressing. 

Of course, there’s no magic involved – instead there’s pure hi-tech chemistry that comes from our own in-house team of chemists here at 3D. When you buy any product with the 3D name on the outside of the label, you can trust only the best is on the inside of the bottle. Plus, 3D is dedicated to making our world a better place to live for all of us. Part of our mission for every product we create is to make sure it’s safe for the environment and also safe for you – our customer.

What is it? - Solvent-based, water-proof dressing for tires and all exterior rubber, plastic, and vinyl trim.

What does it do? - Restores a deep, dark black appearance with high a high gloss shine to rubber, plastic and viny.

When do you use it? - After first cleaning the surface via washing and drying or using the appropriate spray-on cleaner.

Why use 3D Magic Blue over other options? - Like all 3D products, this high-performance multi-surface exterior dressing is earth-friendly, biodegradable and V.O.C. compliant. It’s also human-friendly as we want you our customers to be around for a long time.

• Long lasting silicone formula creates a deep, dark black shine.
• Use on any smooth, hard exterior surface.
• For tires, exterior plastic and vinyl trim, moldings, wheel wells, splash guards and other rubber and plastic surfaces.
• Solvent-based instead of water-based, which makes it highly water-resistant – holds up well to inclement weather and repeated washings.
• High-viscosity formulation means lower likelihood to run off tires.
• Easy wipe-on, wipe-off application.
• Keeps tires looking black for weeks, not days.
• No run, no sling formula – keeps your car’s paint clean!

• Restores faded and dull plastic trim and bumpers
• Renews surface to original appearance
• Long lasting shine and protection
• Non-greasy formula gets your trim looking 'like new'

• RESTORE TO ORIGINAL LOOK … 3D Trim Care is a premium trim gel that restores faded and dull plastic molding, trim, and bumpers to their original, shiny form!
• NON-GREASY … 3D Trim Care has a non-greasy formula that is easy to apply and gets deep into the surface to bring the black trim color back to life!
• LONG LASTING DURABILITY … 3D Trim Care is designed to last long and protect your plastic trim even after washing your car!
• LIKE NEW RESULTS … 3D Trim Care gives your trim that 'like new' look and is excellent for any car with plastic trims or bumpers!
• PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a trim restorer that's tried and trusted.

Description

Back in the old days, before the mid-1970s, most of the trim and many of the components on a car to give it beauty, accents and unique styling came from the use of polished, shiny metal like chrome, stainless steel, nickel, and aluminum. As the costs for these metals and their weight became more of an issue when it came to manufacturing modern fuel-efficient vehicles, less costly substitutes like plastic, vinyl and rubber were introduced.

Metal trim and components like grills, bumpers, side mirror, etc. when oxidized and weathered could easily be restored using any simple metal polish. A little rubbing with the polish and some elbow grease and voi la, you could easily restore the shine and it could hold up for years before you would have to re-polish.

Not so with materials like plastic, vinyl, and rubber. When these types of man-made materials age and weather, the fix is not as simple nor does it last as long and it’s simply the nature of the beast or the nature of the physical properties that make up whatever the material is made from.

Here at 3D Products, we don’t let modern problems stop us of from innovating modern solutions. We have a state-of-the-art research and development laboratory and a team of full-time, career PhD chemists from a wide range of chemistry backgrounds. Working as a team and fully understanding all the issues related to making a trim dressing for materials that simply don’t absorb liquids easily, they created a lotion-like formula that is refined to a high degree to enable it to penetrate deep into the tight molecular structures of materials like plastic, vinyl, and rubber. The also tweaked this formula to block-out future ultraviolet rays and water or moisture, which together these things are the foundational elements that cause oxidation or the breaking-down of these types of materials, which we see as fading, aging, and cracking.

While there is no perfect, or permanent remedy for these types of materials in open-air environments and a wide spectrum of climates, 3D Trim Care comes close. 

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - Lotion-like restorer for all types of plastic trim, rubber, vinyl and even metal surfaces.

What does it do? - Restores a deep, dark rich shine to faded, aged exterior trim and components.

When do you use it? - After first washing and drying the surface to be treated using a normal car wash soap, all-purpose-cleaner or degreaser.

Why use 3D Trim Care over other options? - Any exterior automotive surfaces, materials and components will easily fade, age, and turn ugly from the effects of simple exposure to wet weather driving and ultraviolet rays from the sun. This, plus the time factor, that is the longer your car is exposed to moisture and UV rays from the sun, the more these materials and surface are going to fade, age and even crack over time.

Creating a product that rejuvenates, restores, and maintains these surfaces and materials, like plastic, vinyl, rubber, and metal surfaces (with matte finishes) is difficult because these types of materials and surfaces do not readily absorb most liquids deep into their structure. Most products merely sit on the surface and provide a temporary visual appearance improvement.

The chemists at 3D Products understand these materials and surfaces and purposefully created a formula that will penetrate and bond to provide true visual and physical improvements that hold up over time with repeated applications. When it comes to non-porous materials like plastic, nothing will last forever. Instead of false claims, or misleading information, we educate people on the root cause of the issue and the honest remedy. 3D Trim Care works great but, just like you need to wash your car regularly to keep it clean, you need to treat plastic, vinyl, rubber, and metal surfaces regularly to protect their physical structure and maintain their visual appearance. At least with 3D Trim Care, the stuff in the bottle really works.

• Restores a rich dark look to faded plastic, vinyl, rubber, and metal trim.
• Use on body trim and moldings, door handles, rear view mirrors, bumpers, body cladding, running boards, wiper arms, windshield cowling, etc.
• Powerful UV blocking polymers prevent fading, aging, and cracking.
• Non-greasy, dry to the touch. Fast, easy, wipe-on, wipe-off application.
• Water resistant, will not run off in wet weather or repeated washing.
• Fast drying, no-streak formula maintains the factory new look.
• Protects against further deterioration caused by sun, acid rain, chemical fallout, oxidation, ozone and high alkaline soaps and degreasers.
• Actively repels dirt, water, and other airborne contaminants.
• Works on all colors of exterior plastic trim including black, brown, and gray.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

Directions

IMPORTANT: Always work on a cool clean surface in the shade. Always shake liquids well before and during use.

Step 1: Apply some 3D Trim Care directly onto clean foam, microfiber applicator pad or piece of cloth. Spread the 3D Trim Care over the surface to be treated and actively massage the product into the surface to whatever level is possible. Allow the product to penetrate for 45 seconds to a minute.

Step 2: Using a clean, microfiber utility towel, remove any excess 3D Trim Care and buff this treated area to a dry, rich satin sheen. Repeat this process to the rest of any plastic, vinyl, rubber trim, moldings, splash guards, or components on the rest of the vehicle.

For severely neglected surfaces

Initial application: Apply ample 3D Trim Care and allow to penetrate for up to 10 minutes then remove.

Secondary application: Repeat using a heavy application and allow to penetrate up to 5 minutes or until color or darkness is restored and desired appearance is achieved.

NOTE: 3D Trim Care can also be used on matte black paint commonly used on metal wiper arms.

IMPORTANT: If you get any 3D Trim Care on glass, wipe-off immediately. If needed, use some 3D Glass Cleaner to make removal easier and more complete.

• Non-greasy tire shine
• High gloss and long lasting durability
• Easy spray and wipe formula cleans surface with minimal effort
• Safe formula can be applied on many different rubber or vinyl surfaces

Unlike most tire dressings, also called tire shines on the market, this tire shine was formulated to be fun and easy to use, not greasy and messy to use. The chemists at 3D are like you, that is, they don’t want a greasy, sticky mess on the sides of their tires, they simply want them to look fantastic with a deep, dark black shine. 

3D Tire Shine is a thick, rich water-based gel, it offers a very clean application without any sloppy drips or smears to deal with after the fact. Simply wipe on and massage into the tire sidewall and then allow to dry. For even more shine, wait a few minutes and apply a second, thin light application and allow this second application to dry before driving. Your tires will look amazing without becoming an oily, greasy dust-magnet that will be a pain to clean the next time you wash your car.

What is it? - Water-based tire and trim dressing.

What does it do? - Restores a high gloss shine to rubber and vinyl surfaces.

When do you use it? - After first cleaning the surface to be treated.

Why use 3D Tire Shine over other options? - This multi-purpose tire shine is water-based and non-greasy, and this makes it a pleasure to use. It works like any silicone, solvent or oil-based dressing without the greasy, oily mess. You can control the gloss and shine level by the amount of product you apply. For a super high gloss, high shine finish, apply a second coat. For a low gloss matte finish, apply only one application and then wipe the tire sidewall to remove any excess and dampen down the shine.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

• Long lasting, water-based tire dressing.
• Provides excellent UV protection from sun.
• Creates a high shine, high gloss finish.
• Can also be used to dress wheel wells.
• Non-greasy, non-oily – won’t turn tires into dust magnets.
• Easy gel-application means no overspray on wheels or body panels.
• Apply using tire swipe, foam or microfiber applicator of paint brush.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

Directions

IMPORTANT: Always work on a cool clean surface in the shade. Thoroughly clean tires first. The key to great results for any tire dressing or tire shine starts with clean tire sidewalls.

Step 1: Apply an ample amount of 3D Tire Shine directly onto the tire sidewall and then using a tire brush, (quality paint brush), spread the product evenly over the sidewall. You can also use a foam tire swipe or foam or microfiber applicator pad.

Step 2: Lightly wipe tire sidewall to remove any excess 3D Tire Shine if needed. Allow 3D Tire Shine to fully dry before driving.

Repeat this process to the of the tire sidewalls.

Ultra Protectant is a high quality, long lasting, water-based, UV resistant protectant with a high gloss shine. Use it on tires and in wheel wells.

This spray-on formula also protects and beautifies exterior vinyl surfaces. Ultra Protectant is the perfect protection to dress tires Ultra Protectant protects tires and exterior trim from the sun’s damaging UV rays and penetrates the rubber and vinyl for Ultra Protectant conditioning.

Water-based Ultra Protectant is VOC, Green, and Biodegradable.

Directions:

Spray Ultra Protectant on tires, trim and wheel wells and get hundred percent coverage.

Wipe off paint or rims and just leave to dry, if you want a high gloss shine.

If you prefer a stain or low gloss shine, wipe off Ultra protectant after a few minutes.

That’s all there is to condition and protect your tires, exterior trim, and wheel wells.

Instant Shine is a quick, high gloss dressing for all the plastics, vinyl and rubbers in the exterior and interior of your vehicles. It’s going to instantly shine and protect your vehicle’s surface. 3D Instant Shine also works really great on the cowling of vehicles.

It excels in hard to reach areas, like hoods that overlap a lot. You want to make sure that you do your glass after you do any of the trim care or any type of dressing. Use Instant Shine is mostly for these nooks and crannies instead of trying to get your fingers in there, with any type of dressing.

Shake before use and then spray it down nice and even. Use this in a well-ventilated area. Please read all the instructions on the can.

Instant Shine is outstanding on these honeycomb grills, because it would take you all day to work out all the details by hand.

Instant shine also has different applications for the interior of the vehicle.  Use Instant Shine for those hard to reach places like your air vents, cup holders, door panels, or any tight little spot you can’t reach with your finger.

It also works really great on low profile tires that are hard to reach.

You can have no sling, instantly shining, quickly conditioned and protect your vehicle’s plastic and rubbers. Instant Shine is the fastest and easiest way to add a brilliant shine to your trim, simply spray on this long-lasting aerosol coating and that’s it! It instantly makes even faded trim look better than new. Instant Shine is preferred by professional detailers, car collectors, dealers, and other auto care enthusiasts. 

Instant Shine immediately brightens and protects plastic, vinyl, and many other surfaces without leaving a greasy mess. Restores color and brilliance to interior & exterior surfaces such as textured bumpers, dashboards, air vents, door trim, grilles, engine compartments and a whole lot more. Even hides ugly white wax marks on a black exterior trim. What makes this trim protectant even more amazing its ability to treat hard to reach areas that you can’t easily access. Just simply mist Instant Shine to the panel you’d like to refurbish and it goes to work restoring a brilliant shine.

3D Instant Shine is not only the best working aerosol spray protectant on the market; it’s the best smelling one too! You’ll absolutely love the watermelon aroma so much while you’re “detailing out” your vehicle. Be cautious of other brands as they tend to not last because they’re made with water and surfactants (soaps) that evaporate and wash off easily with water. Instant Shine contains no surfactants or water, so it lasts longer. It actually REPELS water and waterborne dirt due to its non-tacky attributes. One application lasts for weeks on your trim.

Now, this easy to use technology is available to the general car care public. You will be impressed with how simple it is to treat all those hard to reach places throughout your car. It will make your dusty and dingy dash vents look amazing! Great for restoring perfection to radios, center consoles & hard to reach places in between seats & engine compartments too.

Instant Shine is NOT a messy foam or drippy liquid. This easy-to-use aerosol requires no wiping in many cases. Sprays on in seconds, won’t harm painted surfaces, protects against UV, sunlight & more. Instant shine will not attract dust or dirt. Contains no harmful CFCs which deplete the ozone layer.

WARNING: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Ultimate Elemental Protection
• UV Protection 
• Dry to the touch
• Deep Dark, Matte Finish

PEAK HYDROPHOBIC TECHNOLOGY: Experience the ultimate water-repellent effect with GLW Series Matte Tire Shine. Advanced hydrophobic formula contain ceramic Silicon Dioxide (SiO2) technology that repels water spots, dirt, mud, and protects against the elements.

HYPER DEEP MATTE SHEEN: Restore an ultra-dark, matte finish to your ride’s dull, worn-looking tires.

UV PROTECTION: Shield your tires from fading, cracking, dry rot, and discoloration with GLW Series’ powerful, long lasting SiO2 Matte Tire Shine.

NO SLING: Dry-to-the-touch tire dressing repels dust and dirt, keeping the side, fenders, and wheels clean once you hit the road.

3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.

The 3D GLW Series Iron Remover stands as a remarkable and hyper-effective solution, specifically designed to act as a potent wheel and paint decontaminant eliminator. With precision and safety at its core, this exceptional product effortlessly eradicates iron particles and corrosion from their very source. Armed with a state-of-the-art formula, the GLW Series Iron Remover performs a meticulous decontamination, swiftly breaking down and loosening stubborn brake dust, insidious traffic pollution, and resilient road film, leading to a remarkably safe and hassle-free rinse off process. Embrace the power of this high-performance, acid-free Iron Remover that upholds the integrity of all wheel types, including painted, chrome, polished, and coated aluminum surfaces, ensuring that each one retains its immaculate condition without any surface damage. Unlock the ease of iron contaminant removal, revolutionizing your car's wheels, as this extraordinary product transcends the need for manual scrubbing, presenting you with a wheel-cleansing experience like no other.

Experience the pinnacle of automotive care with 3D GLW Series Iron Remover – an elite decontaminant fortified with unrivaled efficiency and safety, guaranteed to elevate your car's appearance and performance. With its swift and thorough decontamination process, the GLW Series Iron Remover masterfully tackles the toughest iron particles and corrosion, granting your wheels and paint surfaces the ultimate treatment they deserve. Be assured that this high-performance, acid-free Iron Remover extends its prowess to cater to all wheel types, from painted elegance to chrome brilliance, polished luxury, and coated aluminum grandeur – safeguarding their pristine appearance without compromising their surfaces. Embrace the future of iron contaminant removal, where manual scrubbing becomes a thing of the past, as the 3D GLW Series Iron Remover ushers in a new era of unparalleled convenience, leaving your car's wheels glowing with a renewed radiance.

• The Ultimate Decontaminator
• Rapid Reacting Formula
• Safe on Wheels & Paint
• Hyper Effective Decon

RAPID REACTING FORMULA Protect your wheels and paint from harmful iron particles. GLW Series Iron Remover’s formula decontaminates and loosens up brake dust, traffic pollution, and road film rapidly resulting in a safe and easy rinse. 

pH BALANCED 3D’s high performance, acid-free iron remover cleans all wheel types including painted, chrome, polished, and coated aluminum without damaging the surface.

BLEEDING PURPLE Iron Remover reacts with iron particles in seconds. When the spray “bleeds” purple, you’ll know the product is breaking down iron, oxidation, and fallout build up. This cleaner spray targets heavy grime, while neutralizing the reactions that cause rust and paint failure from brake dust and other airborne chemical compounds containing iron.

HYPER EFFECTIVE WHEEL CLEANER Easy spray on, rinse off. Effectively remove iron oxide from your car’s wheels without manual scrubbing. To decontaminate the surface, prep spray with iron remover, leave for 30 seconds to a minute, then wash off with water revealing a spotless hyper GLW.

3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.

The 3D GLW Series SiO2 Ceramic Tire Gloss offers an extraordinary level of hydrophobic high gloss finish, delivering unparalleled elemental protection for your tires. With its cutting-edge SiO2 Ceramic technology, this tire shine provides the ultimate defense against the elements, creating a long-lasting hydrophobic shield. This advanced formula ensures that your tires repel water and other environmental factors, maintaining a hyper glossy and deep dark appearance for an extended period. Not only does it enhance the visual appeal of your tires, but it also offers vital UV protection to prevent fading, cracking, and discoloration, preserving their pristine condition. When you roll with the glow of SiO2 Ceramic Tire Gloss, your tires stay safeguarded and looking stunningly glossy.

To experience the full benefits of this exceptional product, applying it is a breeze. Simply spread the SiO2 Ceramic Tire Gloss evenly across the surfaces of your tires, revealing a high gloss finish that not only adds shine but also acts as a robust barrier against the elements. With every application, you protect your tires from the damaging effects of fading, cracking, and future discoloration, all while enjoying the hydrophobic benefits that repel water and environmental contaminants. For comprehensive and long-lasting protection, make it a regular practice to apply SiO2 Ceramic Tire Gloss after every wash. Embrace the glow it provides, ensuring your tires stay in prime condition and maintaining a stunning appearance that lasts. With 3D GLW Series SiO2 Ceramic Tire Gloss, you can confidently showcase your vehicle’s tires.

• Ultimate Elemental Protection
• UV Protection 
• Dry to the touch
• Hyper Black Gloss, Wet Look

PEAK HYDROPHOBIC TECHNOLOGY: Experience the ultimate water-repellent effect with GLW Series High Gloss Tire Shine. Advanced hydrophobic formula contain ceramic Silicon Dioxide (SiO2) technology that repels water spots, dirt, mud, and protects against the elements.

HYPER GLOSS, WET LOOK: Restore an hyper black gloss, wet look to your ride’s dull, worn-looking tires.

UV PROTECTION: Shield your tires from fading, cracking, dry rot, and discoloration with GLW Series’ powerful, long lasting SiO2 High Gloss Tire Shine.

NO SLING: Dry-to-the-touch tire dressing repels dust and dirt, keeping the side, fenders, and even wheels clean once you hit the road.

3D GLW SERIES: Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.

This 3D Car Care UK Wheel Cleaning & Care Kit from 3D Products Hi Tech Industries is the ultimate solution for maintaining your wheels and tires.

• Complete Wheel Care: Includes wheel cleaner, tyre dressing, wheel woolie, and tyre brush for comprehensive cleaning and care.
• High-Quality Products: Made by 3D Products Hi Tech Industries for superior performance and durability.

Easily clean your wheels with the specialized tools provided in this kit while giving your tires a fresh look with the included tyre dressing. Keep your vehicle looking its best with this all-in-one wheel cleaning kit.

This kit includes

473ml BDX our Brake Dust Remover

473ml Yellow Degreaser our Specialised Wheel & Tyre Cleaner

473ml Ultra Protectant our spray on gloss Tyre Dressing.

Heavy Duty Detailing Brush

17" Tampico Spoke Brush / Wood Handle

Nylon Tyre Brush with 1" Bristle

Square White Microfibre 4" x 5"

Introducing the 3D GLW Series Wheel and Tire Cleaner, the unrivaled solution for achieving an immaculate deep clean for your wheels and tires. Specially formulated with a hyper-duty blend, this advanced cleaner is engineered to penetrate deep into the surfaces, targeting and eliminating heavy dirt, stubborn brake dust, and other road contaminants that accumulate over time. Say goodbye to the unsightly brown discoloration that mars the appearance of your tires, as this powerful cleaner works diligently to restore them to their original deep, dark black finish. By effortlessly lifting away the toughest residues, the GLW Series Wheel and Tire Cleaner rejuvenates your wheels, leaving them gleaming with a renewed brilliance.

Not only does this remarkable cleaner offer an ultimate deep clean, but it also acts as a safeguard against potential harm to your wheels and paint. By effectively removing brake dust and grime, it prevents these particles from causing damage, ensuring that your wheels maintain their pristine condition. Rest assured that this cleaner is meticulously formulated to be ultra-effective, yet gentle and safe for various wheel finishes, including clear-coated, powder-coated, chrome, alloy, and painted wheels. Experience the unbeatable glow and sleek factory tire finish that this GLW Series cleaner brings to your wheels, elevating the overall appearance of your vehicle to new heights. Say hello to spotless wheels and tires that radiate a sense of pride and luxury, courtesy of the 3D GLW Series Wheel and Tire Cleaner.

• Ultimate Deep Clean
• Safe on All Finishes
• Grime Dissolving Technology
• Safe and Ultra-Effective Wheel Cleaner

GRIME DISSOLVING TECHNOLOGY GLW Series advanced Wheel and Tire Cleaner’s hyper-duty formula penetrates heavy dirt, brake dust, and other road contaminates. Spray, brush, and easily wash away buildup from sidewalls, wheel well areas, and wheel surfaces. 

REMOVES TIRE BROWNING Say goodbye to brown sidewalls! GLW Series Wheel and Tire Cleaner excels at lifting away the brown discoloration and effectively restores your tires’ original deep dark black finish.

ULTIMATE DEEP CLEAN Brake dust contains corrosive iron and carbon deposits that can destroy wheels and fly onto your paint leaving scratches. 3D Wheel & Tire Cleaner gives your wheels an ultimate deep clean to target brake dust and grime preventing any harm to your wheels and paint.

SAFE ON ALL FINISHES 3D’s high-performance GLW cleaner is ultra-effective, yet safe on clear-coated, powder-coated, chrome, alloy, and painted wheels. 

3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.

• Thick, heavy, chemical-resistant bristles
• Great for cleaning engine parts
• 10-inch length ideal for reaching hard-to-clean areas and engine components
• Plastic handle
• Heavy-duty construction for durability and long-lasting performance
• Versatile brush suitable for cleaning various vehicle parts
• Comfortable, ergonomic handle for secure grip and ease of use
• Compatible with different cleaning agents, including solvents, degreasers, and all-purpose cleaners

Hi tech Industries Nylon Tyre Brush with 1" Black Bristles - Hard Plastic Handle

Black & Grey Soft Grip Spoke Brush, Strong Plastic Handle 

Natural Tampico spoke brush. 11 in. brush length, 17 in. overall length. Wood handle with convenient metal hook. Large wheel cleaning brush