11 products
11 products
Sort by:
From £14.99
Unit price per- Hybrid rubbing compound and finishing polish all in ONE bottle
- One step scratch and swirl remover delivers true paint correction
- Removes many moderate to heavy surface imperfections on all paint colors
- For best results, apply with a Dual Action or Random Orbital Polisher
A Hybrid Cutting Compound & Finishing Polish
Paint correction is one of the least desirable steps when it comes to doing a full exterior detail job. The reason why is because most compounds and polishes are a pain to work with. This includes how the feel while buffing, they dry up and start creating dust, if you work them too long, they become sticky like glue and then wipe of is both frustrating, difficult, time consuming and tiring. Plus, you need more towels to do the job safely.
3D ONE is like no other compound or polish you’ve ever used, and you’ll find this out the first time you use it. 3D ONE cuts like a compound and finishes out like a fine cut polish. Other companies have tried to create a product like 3D ONE in the past, but no one even comes close to 3D ONE. To change the cut simply change the pad or tool. That’s right, change the tool. For super aggressive cut, use 3D ONE with a rotary polisher and a traditional 4-ply, twisted wool cutting pad. For less cut, use any orbital polisher with either a fiber pad or a foam cutting pad. For polishing and show car finishing work, switch to your favorite orbital polisher and a soft foam polishing of even softer foam finishing pad.
Unlike any other compound or polish you’ve ever used, to experience the forever buffing cycle is incredible. This product will simply NOT dry-up on you. As long as you buff the product will stay wet on the surface and continue to cut or polish. Everyone I’ve ever met hates it when any product becomes dusty while they buff or when it’s time to wipe-off the residue. Never happens. Never.
The wipe-off is smooth and fluid. The product lubricates the surface as you wipe so not only is wiping off easy there’s virtually zero risk for wiping induced towel marring. Unheard of when it comes to compounds and polishes.
While it’s always a good best practice to wipe off any paint care products during the job, one time I was compounding a Corvette and an emergency came up. I had to leave the shop. I dreaded coming in the next day. I fully expected the 3D ONE residue covering the entire car to wipe-off like concrete. To my complete and joyful surprise, it wiped off just as easy as if I had just finished buffing. In fact, it may have wiped off easier! The point being – this product wipes off easy and this simply is not the case with most products on the market today. And when a product is difficult to wipe off this not only increases the risk for put wiping scratches back into the paint (you just invested hours buffing to perfection), but it will also tire you out and take all the fun out your work.
Get a bottle – see for yourself what you read above is true and accurate. 3D ONE will become you new go-to favorite compound/polish.
What is it? - Combination 2-in-1 product – it is a compound/polish. Cuts like a compound and finishes like a polish.
Uses 3D’s proprietary alpha ceramic alumina abrasive technology. Alumina Oxide is a conductor of heat. Ceramic is an insulator of heat. By combining to create a hybrid, the ceramic counters the heat issue created from the alumina oxide to reduce and help eliminate heat issues like burn-through from excess surface temperatures.
No filler formula – The results you see are true and accurate – no fillers, hiding or masking.
What does it do? - Removes below surface paint defects like swirls, scratches, water spots and oxidation. Can be used with aggressive pads and powerful tools for removing deep and/or serious paint defects or can be used with soft foam pads and free spinning orbital polishers to finish out for show car results.
When do you use it? - Anytime you want to remove below surface defects that are in your car’s paint and then create a super high gloss finish perfect for sealing with a wax, synthetic paint sealant or a ceramic paint coatings.
Why use 3D ONE over other options? - Freaking amazing abrasive technology. Before I tell you about the product itself, first you need to know there’s something that’s a BIG DEAL about 3D that separates 3D from all the rest of the car care companies and that is – 3D makes their own abrasive technology from scratch!
Unlike most other companies that much cross their fingers and hope they are buying the best abrasive technology, or even good abrasive technology, 3D makes it themselves. And they can do this because they have great chemists. What’s inside the bottle starts with a great team of chemists and an owner that believes in them. Plus – the owner is also the head chemist. This is why at a minimum you own it to yourself to at least try 3D ONE. It’s your money, but it’s also you time, and no one wants to buff out a car only to find out the results don’t look good and now you have to do it a second time. This won’t happen with 3D products and also 3D’s Customer Care Team. We’re here to help you from start to finish.
Now that you know 3D makes their own abrasive technology, (for all their compounds, polishes, and all-in-ones, for both their automotive line and their marine line), now let me tell you about the 3D ONE itself.
Other companies have tried hard to create a hybrid compound/polish type product with little success. These other attempts either don’t offer the cut necessary to be considered a true compound for heavy duty work or they cut great but don’t finish out well and often times this shows up as micro-marring left in the finish.
3D ONE is the first product that can do both, cut and finish and most important – this hybrid compound/polish works and delivers consistent results over a wide-spectrum or car paints. When it comes to paint correction, the unknown variable between different cars is paint hardness. Some cars can have very hard paint while other cars can have very soft paint and some cars of course are right in the middle, the sweet spot.
3D ONE works on all paint types, hard, medium, and soft. And you can control the level of cut or finish by simply changing the type of pad or the type of pad together with the type of tool. With 3D ONE, you can get rid of all your other antiquated compounds and polishes because now there is finally a product that will in fact do it all.
Besides offering incredible cutting and finishing ability, the product never dries up on you. Meaning you can buff until the cows come home and the product works throughout the entire buffing cycle and just as important – ZERO DUSTING! So many compounds and product dry-up and then start creating dust all over the car, your pad and you! No so with 3D ONE.
No fillers. 3D ONE does not contain any fillers, or any ingredients intended to fill, mask, or camouflage swirls and scratches. The results you see are true and accurate.
Also – Super easy wipe off. Most compounds become sticky and can become difficult to wipe-off after buffing. 3D ONEE is easy to wipe-off immediately after buffing and for hours after buffing. Easy wipe-off mans less risk for user-induced towel wiping marring and better yet – less tiring for you.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
- Combination hybrid compound/polish – Can cut like an aggressive compound or finish-out like a fine-cut polish – in a single product.
- Uses engineered ceramic alumina abrasives, which reduce surface temperature.
- Forever buffing cycle – stays active and wet on the surface as long as you buff.
- ZERO dusting. Note the word ZERO is in all CAPITAL LETTERS!
- Easy wipe-off and no hurry – wipe off immediately or after buffing out entire car.
- Versatile cut – for more correction use a cutting pad, for better finishing, use a finishing pad.
- No fillers – the results you see are true and accurate.
- Body shop safe – contains no silicones or any ingredient that can contaminate a fresh paint environment.
- Water-based for easy clean-up
- Green technology is Earth friendly – V.O.C. compliant, and biodegradable.
From £12.99
Unit price per- All-In-One car scratch remover, swirl correction and wax sealant
- Premium car polish and wax all in one bottle
- Restores paint color, depth and gloss while also adding a layer of protection
- For best results, apply with a Dual Action or Random Orbital Polisher
3D SPEED is the most popular AIO product on the market world-wide. The reason why is because it works so good and it’s so fast and easy to work with. In fact, it’s the most versatile AIO on the market today. 3D SPEED can be used with any type of machine, any type of pad and is the most effective AIO on the market if you choose to work by hand.
Just one of the reasons 3D SPEED is so popular is due to the proprietary abrasive technology created at 3D’s own manufacturing plant in Santa Clarita, California. Unlike most brands, 3D makes their own abrasive technology in their privately owned manufacturing plant based upon their own research and development by their team of in-house chemists. Everything from the raw materials to the finished product is controlled and manufactured by 3D. It doesn’t get any more real than this.
Beside incredible paint correction and polishing ability, 3D SPEED leaves behind a layer of synthetic paint sealant blended with Montan Wax. This proprietary blend creates a sealant that offers long lasting shine with excellent resistance to high heat climates as well as resisting corrosion from exposure to chemical contamination. This blended sealant also offers excellent gloss, shine, and slickness for reduced marring anytime you wash, dry or in any way wipe the finish.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - 3D SPEED is the world’s best AIO or All-in-One. The term AIO is interchangeable with the term cleaner/wax, that is it’s like mixing a compound, a polish, and a wax into one bottle.
AIOs are one of the oldest categories of paint correction products in the car detailing industry. These products were first introduced in the early years when automobiles were first introduced and replacing horse-drawn carriages as a means of transportation. This category of product enables a person to maintain their car’s finish quickly and easily by removing oxidation and restoring the full richness of color while leaving behind wax protection.
What does it do? - 3D SPEED does three paint correction processes in a single step,
1: Compound - 3D’s unique and proprietary abrasive technology removes defects like swirls, scratches, water spots and oxidation WITHOUT inflicting micro-marring at the same time.
2: Polish – 3D’s own polishing agents pick up where the compound leaves off to create a clear, high gloss shine with maximum D.O.I or distinction of image.
3: Protection – 3D SPEED seals the surface to lock-in the achieved results while locking out all the corrosive substances found in the environment that act to attack and corrode the paint.
While it can be a tick difficult to wrap your brain around how a single product can remove defects while at the same time leaving protection behind – using this product just ONE time will make you a believer.
When do you use it? - Anytime you want to restore a better-than-new factory shine to your car’s paint. And the good news is you can use this product on virtually any type of paint and also gelcoat, plastic surfaces, and even clear bras or PPF or Paint Protection Film as is known in the detailing industry. You can even use this product on glass to remove light water spotting, road film and drizzle stains. 3D SPEED is as close to a miracle product you can find it’s that good.
Why use 3D SPEED over other options? - Why use 3D SPEED over competitor’s products? This is an easy question to answer… because it works so well.
Let’s take an in-depth look at why 3D SPEED is so good and why everyone should have this product in their detailing arsenal.
3D products use the BEST abrasive technology in the world
The most important factor when it comes to working on car paint is the abrasive technology.
Why? Because it is the abrasive technology that is touching the paint first.
It is the abrasive technology that must do the impossible. It must abrade the surface to remove defects without at the same time leaving in their place its own defects. Any abrasive technology that can do this is an engineering marvel. The fact of the matter is most paint correction products cannot do this. When it comes to abrasive technology, products either work or they don’t. There are no gray areas. Products do not kind of work.
If the products you’re used to working with remove defects, but the results always look hazy in the sun – chances are good this is micro-marring caused by inferior abrasive technology. When this happens the only way to undo the damage is to re-do the job only this time using great abrasive technology. Same yourself time, energy, and frustration – use products from 3D, including 3D SPEED.
From £19.99
Unit price per- Fastest body shop cutting compound quickly cuts and levels hard clearcoats
- Removes sanding marks and other paint defects and imperfections
- Alpha Ceramic Alumina technology provides true paint correction
- Fresh paint safe, silicone-free, and water based
Cuts the hardest clearcoats fast!
3D ACA 510 Premium Rubbing Compound is specifically formulated to cut hard clearcoats fast. The unique, proprietary ceramic abrasive technology keeps surface temperatures lower than conventional compounds. 3D ACA 510 Premium Rubbing Compound also cuts all other types of paints, coatings, and materials fast.
When it comes to compounds you want a product that cuts fast, cuts cool, is low to no swirl, has zero dusting, long buffing cycle without drying out and most important – easy wipe-off. You get all of these features with 3D ACA 510 Premium Rubbing Compound.
3D ACA 510 Premium Rubbing Compound is the best compound on the market today due to the proprietary abrasive technology created and solely owned and controlled by Tunch Goren, head chemist and owner of 3DProducts.com
This rubbing compound was specifically formulated to quickly cut sanding marks out of hard clearcoats and other hard paints, coatings, and materials. It uses the costliest powder out of all the 3D manufactured powders as well as the best ingredients for the formulation.
In simple words, the term powder means the actual abrasive technology. The term formulation means the total product, this includes the abrasive technology PLUS all the other ingredients that result in the liquid product in the bottle. The liquid portion of the formula include 100% VOC compliant and biodegradable solvents, emulsifiers, wetting agents and other carrying agents, (secret stuff).
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - A body shop safe, silicone-free, water based premium quality fast cutting, aggressive rubbing compound for use on automotive paints in body shops environments. Can be used with any rotary or orbital polisher. Can also be used with both wool and foam pads.
What does it do? - 3D ACA 510 Premium Rubbing Compound is formulated and intended for use in body shops to remove sanding marks after wetsanding. It can also be used by detailers for paint correction including removing deep scratches, water spots, swirls, and oxidation. 3D ACA 510 Premium Rubbing Compound levels automotive paint surfaces to create a more perfect finish
When do you use it? - After wetsanding paint to remove the sanding marks or anytime you need to perform paint correction to remove serious and/or deep swirls, scratches, water spots or oxidation and prep the paint for the polishing step.
Why use 3D ACA 510 over other options? - The most important factor when doing any type of paint polishing is to reach your appearance goal while preserving as much paint as possible. To do this you need the best abrasive technology available on planet Earth.
The abrasive technology used in 3D ACA 510 Premium Rubbing Compound is unique to 3D; no other company has this abrasive technology. It was developed by Tunch Goren after 25 years of creating formulations for the car detailing world. His goal was to create the fastest cutting and best finishing compound in the world. A product that outperforms any competing product with results that are nothing short of exceptional.
This compound was developed to cut hard clearcoats fast! Guess what? It will also cut medium and soft paints fast too! And because the abrasives are precision engineered – the cut is clean with no scouring, hazing, or dulling like caveman compounds.
Paint correction and specifically the compounding step tends to take the most time out of all the various paint correction step. With 3D ACA 510 Premium Rubbing Compound, you have a compound that cuts fast and finishes out exceptionally well. Your choice of compound is the single most important factor you control to reduce the time needed for paint correction step.
From £19.99
Unit price per- Fastest body shop safe finishing polish
- Alpha Ceramic Alumina technology provides true paint correction
- Easy clean up, superior finish, no fillers
- Fresh paint safe, silicone-free, and water based
3D ACA 520 Finishing Polish is the next evolution product performance and finish quality results for the fine-cut polish category in the body shop and car detailing industry.
Our 3D AAT 502 Finishing Polish was our first finishing polish introduced in 2018 and it’s good… really good. But just like everything in our world is continually changing, Tunch Goren, the owner and head chemist at 3D Products came up with an even better abrasive technology for a new compound, ACA 510 Premium Rubbing Compound and a new polish 3D ACA 520 Finishing Polish.
This new formula requires more time and more complex steps to create the raw materials and process them into the final powder – Alpha Ceramic Alumina or ACA. If you’re new to paint correction chemistry lingo – the word powder refers to the abrasive technology.
Besides the powder, the other important components that result in a compound or polish are the liquids. The liquids are just as important as the powder because it is the liquids that determine how well or how poorly the powder performs in different applications, such as for use with ha rotary polisher and/or for use with an orbital polisher.
After much experimenting with a brand new and very complex processing technology, once Tunch Goren perfected the powder and the accompanying liquids he then blended these two components together to create 3D ACA 510 Premium Rubbing Compound and 3D ACA 520 Finishing Polish. The new global tag-team of body shop safe compounds and polishes.
Like ALL 3D products, 3D ACA 520 Finishing Polish contains no harsh, harmful solvents nor any OSHA regulated crystalline silica. 3D ACA 520 Finishing Polish is the fastest polish in the industry for producing hologram-free results. This proprietary Alpha Ceramic Alumina powder and the water-based formula reduce heat during the buffing process, offers a super long open time or buffing cycle, zero dusting and easy wipe-off. If you demand the best, then get 3D ACA 520 Finishing Polish.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - A body shop safe, silicone-free, water based premium quality fine-cut polish for use on automotive paints in in body shops environments. Can be used with any rotary or orbital polisher with foam pads.
What does it do? - Quickly removes holograms, fine swirls, fine toweling marks, shallow scratches, water spots and oxidation. Maximizes the distinction of image or D.O.I. appearance quality of a paint finish. Perfectly prepares the paint for wax, sealant, or ceramic coating.
When do you use it? - After first removing sanding marks with a 3D compound and/or after removing any serious or deep paint defects like swirls, scratches, water spots and oxidation.
Why use 3D ACA 520 Finishing Polish over other options? - The polishing step is the final step to perfect the paint. The results you create during all the steps are important but it’s the final polishing step where your product of choice has the chance to be the hero or the zero. Don’t be a zero… be the hero! Choose 3D ACA 520 Finishing Polish and the results you create will establish your reputation as a true professional in this industry and directly reflect your skill, knowledge, and talent.
3D ACA 520 Finishing Polish consistently delivers customer pleasing results sure to impress everyone. Did I mention it also wipes off easy? The next time you’re shopping for a better polish, make your job easy – choose 3D ACA 520 Finishing Polish.
- FASTEST fine-cut polish removes holograms, fines swirls and scratches.
- More correction, more speed and same finish results as 3D AAT 502 Finishing Polish.
- Precision engineered proprietary Alpha Ceramic Alumina, (ACA) abrasive technology.
- Chemically tuned for both hard and soft paints.
- Finishes out hologram free with rotary polisher and soft foam finishing pad.
- Works with both rotary and orbital polishers plus foam, microfiber, or wool pads.
- Body shop safe – Fresh paint safe – Silicone free!
- Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
- Water-based – No harsh solvents or foul odors!
- Wipes off easy! – Won’t clog buffing pads –– Competitive pricing.
- 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
From £19.99
Unit price per- Step 1 extra cutting body shop compound with foam or wool pad
- Cuts P1000 grit sandpaper or finer
- Removes sanding marks, deep scratches, oxidation, and water spots
- Levels car paint surface to create a more perfect finish
3D ACA 500 X-TRA Cut Compound is the wool pad version of 3D ACA 510 for shops that prefer and use wool pads when cutting with a rotary polisher.
When it comes to polishing paint, THE most important factor is the abrasive technology. Think about it? It is the abrasives that TOUCH the paint first, then the buffing pad. Behind the pad is the tool and behind the tool is the person.
3D Products is unique in ALL the world because our abrasive technology is unique to 3D. We make all our own powders, (powders mean abrasive technology), we go as far to make our own raw materials to make our own powders! There’s no other company that can make this claim.
Tunch Goren, the head chemist, founder and owner of 3D Products came up with this technology completely on his own after studying abrasive technology and formulations for over 25 years. Tunch’s passion is to continually create abrasive technology that is unlike no other abrasive technology in the world.
The process that Tunch Goren invented and manufactures in-house in Santa Clarita, California is unique – there are no other manufacturing plants on Earth with this capability.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - A body shop safe, silicone-free, water based premium quality fast cutting compound for use with wool pads and rotary polishers to remove sanding marks in body shop environments.
What does it do? - 3D ACA 500 X-TRA Cut Compound is formulated and intended for use in body shops to remove sanding marks after wet sanding. It can also be used by detailers for paint correction including removing deep scratches, water spots, swirls, and oxidation. 3D ACA 500 X-TRA Cut Compound levels automotive paint surfaces to create a more perfect finish
When do you use it? - After wet sanding paint to remove the sanding marks or anytime you need to perform paint correction to remove serious and/or deep swirls, scratches, water spots or oxidation and prep the paint for the polishing step.
Why use 3D ACA 500 over other options? - Fast cutting, long buffing cycle, zero dusting and easy wipe-off – what’s not to like? Plus, 3D’s exclusive and even exotic Alpha Ceramic Alumina abrasive technology does not retain heat like conventional abrasive technology. This helps to keep surface temperatures low.
Low buffing temperatures are important because unlike the misinformation that floats around the internet, heat is not good for clearcoats. You’re NOT supposed to heat-up clearcoat paint as a part of any buffing process although some people teach this as an approved practice.
Besides top-notch product performance, 3D keeps your safety as a top priority when formulating any product including all of our compounds, polishes, and all-in-ones.
There is ZERO crystalline silica in 3D ACA 500 X-TRA Cut Compound just like there is zero crystalline silica in any of our products. Crystalline silica is a fine, glass particulate that floats in the air. It’s cheap and this is why it was commonly used in other brands of compounds, polishes, and all-in-one type products.
Here at 3D, we have NEVER used crystalline silica in any of our products and we never will. We make products that are safe for you and the environment – this is how we roll at 3DProducts.com
- FAST cutting compound for removing sanding marks and other serious paint defects like swirls, scratches, water spots and oxidation.
- 3D ACA 500 X-TRA Cut Compound is specifically formulated for use with WOOL cutting pads with rotary polishers.
- Precision engineered (proprietary) Alpha Ceramic Alumina, (ACA) sub-micron abrasive technology.
- Removes down to P1000 grit sanding marks.
- Body shop safe – Fresh paint safe – Silicone free!
- Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
- Water-based – No harsh solvents or foul odors!
- Wipes off easy! – Won’t clog buffing pads –– Competitive pricing.
- 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant
From £19.99
Unit price per- All-In-One body shop safe compound, polish, and wax
- Restores old and dull paint to blend evenly with freshly painted panels
- Removes holograms, swirls, scratched, oxidation, and water spots
- Fresh paint safe, silicone-free, and water based
We should call this – 3D AAT 505 My Best Friend!
Why? - Because after you use this product ONE time it will be your new best friend. AND – you’ll never want to be without your best friend.
If you work in a body shop you understand all the issues that go on behind the scenes that the general public, your customers, insurance adjusters and yes – even your boss never sees nor gets it.
The majority of work you do is collision repair. Daily drivers get wrecked, new body panels are installed and painted. Now the area you fixed looks better than the rest of the car. It won’t look right to give the car back to the owner with shiny paint where you worked and dull, weathered, swirled-out paint over the rest of the body panels.
You know the right fix is to do a full paint correction including compounding, polishing, and waxing the rest of the car so it MATCHES the new paint. But there’s no time for that and the time, labor and materials are never covered by insurance or the car owner.
You’re a craftsman, you work in a craft industry. Chances are really good you’re also a tick OCD about the perception of the work you personally turn-out as well as the reputation of the shop and shop owner where you work. You’re stuck between a rock and a hard place and there’s no easy answer. Until now.
I know it’s easy to be cynical when you’re reading copy like this but I’m being straight with you because I’m like you. I’m writing from my heart and my real-world experience. I know what it’s like for everyone’s expectations to be unrealistically high and due to time constraints – these kinds of expectations are simply not real-world.
Inside I want to do my best work and make everyone happy including the customer, the boss and yes, myself. I want to feel good about the work I turn-out. I certainly don’t want anyone thinking I’m a hack.
Let’s cut to the chase - here’s what this product is. 3D 505 Correction Glaze is unique in the professional body shop world of compounds and polishes. It’s a polish but nothing like any polish you’ve ever used.
First – it offers great correction ability for a “polish”. It’s not a compound so keep things in perspective – it’s for cleaning up the paint surrounding the new freshly sprayed paint, so the ENTIRE car looks the same.
Tunch calls it a BLENDER because it blends the surrounding panels that are filled with swirls, scratches, and oxidation so they look like the new, fresh sprayed paint.
Now when the customer comes to pick up their car the entire car is going to look great. It’s going to look “finished”. The customer is going to be happy and to be honest – they won’t even know why.
This product removes medium level swirls and scratches and anything it doesn’t remove it dramatically improves. It NEVER dries out or gets dusty. Never. And it wipes off super easy and leaves a wet looking shine. And then get this – it’s safe for fresh paint.
It’s works like a light cutting compound, a jeweling polish and leaves behind a proprietary hybrid version of Montan wax. Not only will the car look great but as your customer puts the car back on the road – the paint will be protected from the elements.
In fact, not to take away anything from any of the other 3D polishes, 502 and 520, because they work great also, but you can use this product, 505 Correction Glaze as the follow-up polish to any 3D compounding step. Same idea – use a fine cut polish to perfect the results created by the compounding step but with 3D 505 Correction Glaze you’re also leaving behind some protection for the customer’s benefit.
Take a chance. You’ve got nothing to lose. We offer a money back guarantee – you’ve got nothing to lose. Then use this product ONE time like I describe in the directions and thank 3D, Tunch Goren, the owner (and head chemist) and finally me later. -Mike Phillips
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - A body shop safe, fresh paint safe AIO. AIO stands for All-in-One. An all-in-one product is a product the compounds, polishes and protects in one step. In the hold days we called these a cleaner/wax. This is simply the next evolution in cleaner/waxes as it’s a hybrid product that’s safe for fresh paint.
What does it do? - It works like an AIO in the car detailing world only it’s safe for fresh paint. You can use it as a polish on fresh paint to remove minor defects and leave behind Montan wax protection, but its PRIMARY purpose is to restore the shine and gloss to the existing paint on the body panels that surround the panels with new paint. It’s a way to make the weathered panels of the car look new so they match the new paint from the repair work.
When do you use it? - After the body work and paint has been completed on a repair job in collision shops.
Why use 3D AAT 505 Correction Glaze over other options? - The simple and truthful reason you should choose and use 3D 505 Correction Glaze over any other product is because it works so freaking good. It buffs like butter while removing swirls, scratches, water spots and oxidation. After it dries, (and you should let it dry), it wipes off super super easy and this is nice for you.
And for what it’s worth – 3D SPEED is the NUMBER #1 AIO in the car detailing world because it works so well. It removes defects exceptionally well, it has zero dusting, it buffs forever and never dries out and again – it wipes off super easy. 3D 505 Correction Glaze is the body shop version of 3D SPEED. You’re going to love it.
- Unique Body Shop Safe AIO – AIO = All-in-One = Compound/Polish/Wax.
- Removes holograms, swirls, scratches, water spots and oxidation.
- BODY SHOP BLENDER POLISH – Restores and revitalizes old, dull, weathered panels to BLEND evenly with freshly painted panels for an overall uniform appearance to collision repair work.
- Body shop safe – Fresh paint safe – Silicone free!
- Fast, easy machine application – dries fast – wipes off super easy!
- Use with rotary or orbital polishers and foam polishing or finishing pads.
- Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
- Water-based – No harsh solvents or foul odors!
- 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant
From £12.99
Unit price per- Adaptive Abrasive Technology body shop safe cutting compound
- Faster paint leveler cuts P1000 grit sandpaper or finer
- Low dust, easy clean up formula
- Removes sanding marks, deep scratches, oxidation, and water spots
3D AAT 501 Cutting Compound is the first part in a two-part system for use in body shops to cut and finish after sanding. Body shops are considered high-speed or production shops, the collision repair must be made in a timely manner followed by paint work and final polishing steps. Body shop technicians need a compound that works fast and delivers true results, that is the results you see are the results you get.
Many compounds mask scratches and swirls with fillers or oils – we don’t make these kinds of products here at 3D. What you see is what you get – true paint correction with zero hiding.
3D AAT 501 Cutting Compound is our entry level compound. While it’s our entry level compound and the price reflects this, it’s as good, and in most cases better, than any other brand of compound. If your shop is looking for an inexpensive fast cutting compound that works better than the usual suspects, then try 3D AAT 501 Cutting Compound.
Then, after you discover how great our entry level compound is – next time treat yourself to the very best in fast cutting abrasive technology and get a bottle of 3D ACA 510 Premium Rubbing Compound. This top shelf compound costs more to manufacture but after you use it one time, you’ll see why it costs more and you’ll also order it again and again and again – it’s that good.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - A body shop safe, silicone-free, water based pro grade fast cutting compound for use on automotive paints in in body shops environments. Can be used with any rotary or orbital polisher. Can also be used with both wool and foam pads.
What does it do? - 3D AAT 501 Cutting Compound is formulated and intended for use in body shops to remove sanding marks after wet sanding. It can also be used by detailers for paint correction including removing deep scratches, water spots, swirls, and oxidation. 3D AAT 501 Cutting Compound levels automotive paint surfaces to create a more perfect finish
When do you use it? - After wet sanding paint to remove the sanding marks or anytime you need to perform paint correction to remove serious and/or deep swirls, scratches, water spots or oxidation and prep the paint for the polishing step.
Why use 3D AAT 501 Cutting Compound over other options? - 3D AAT 501 Cutting Compound contains ZERO crystalline silica. This is very important. Historically, and to this day, many compounds and polishes contain this hazardous mineral.
Inhaling crystalline silica can lead to serious, sometimes fatal illnesses including silicosis, lung cancer, tuberculosis (in those with silicosis), and chronic obstructive pulmonary disease (COPD). In addition, silica exposure has been linked to other illnesses including renal disease and other cancers.
Here at 3D Products, our goal is to not only create world class products that are environmentally green but also completely safe for our customers. Our compounds, polishes and all-in-one products are all 100% free of any crystalline silica to keep you safe.
Crystalline Silica is nothing to mess around with, if you breathe it into your lungs chances are really high it will cause life-long health issues and worse. Before you purchase any brand of compound, polish, or all-in-one, make sure the label and any accompanying information clearly states the product is safe and does not contain crystalline silica. You can trust the 3D brand; we look out for you.
- FASTER cutting compound for removing sanding marks and other serious paint defects like swirls, scratches, water spots and oxidation.
- Adaptive Abrasive Technology – Provides both mechanical and chemical cutting action.
- Pad independent – use with cutting or polishing foam or wool pads.
- Removes down to P1000 sanding marks.
- Works with any rotary or orbital polisher plus can be used in full sun.
- Body shop safe – Fresh paint safe – Silicone free!
- Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
- Water-based – No harsh solvents or foul odors!
- Wipes off easy! – Won’t clog buffing pads –– Competitive pricing.
- 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
From £12.99
Unit price per- Step 2 Adaptive Abrasive Technology body shop safe finishing polish
- No holograms or fillers create superior gloss finish
- Removes haze and holograms after aggressive cutting compound
- Low dust, easy clean up formula
3D AAT 502 Finishing Polish is the second part in a two-part system for use in body shops to cut and finish after sanding. Body shops are considered high-speed or production shops, the collision repair must be made in a timely manner followed by paint work and final polishing steps. Body shop technicians need a polish that works fast and delivers customer pleasing true results that last.
Many polishes mask scratches and swirls with fillers or oils – here at 3D Products, we don’t make these kinds of products. What you see is what you get – true paint correction with a super high gloss shine.
3D AAT 502 Finishing Polish is our entry level polish. Even though it’s our entry level polish and the price reflects this, it’s as good and in most cases better than any other brand of polish on the market. If your shop is looking for an inexpensive top performing polish that delivers consistent results over the widest spectrum of paint systems, then try 3D AAT 502 Finishing Polish.
Once you experience how capable this polish is for maximizing the gloss, clarity, and shine after the compounding step with a 3D compound, you’ll never want to be without it. The adaptive abrasive technology used in 3D AAT 502 Finishing Polish removes haze and holograms after aggressive compounding step or use as by itself to remove fine swirls, scratches, water spots and oxidation.
Best of all… it wipes off super easy, so clean-up is a cinch.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - A body shop safe, silicone-free, water based pro-grade quality fine cut polish for use on automotive paints in in body shops environments. Can be used with any rotary or orbital polisher. Can also be used with both wool and foam pads.
What does it do? - Removes holograms, fine swirls, fine toweling marks, shallow scratches, water spots and oxidation. Maximizes the distinction of image or D.O.I. appearance quality of a paint finish. Perfectly prepares the paint for wax, sealant, or ceramic coating.
When do you use it? - After the compounding step to remove any residual haze, minor imperfections, or holograms or as a standalone polish for lightly neglected cars.
Why use 3D AAT 502 Finishing Polish over other options? - Besides the fact that it works awesome and will outperform any other polish you’re used in the past, it’s also safe for you, employees, family, and friends to use or just be around.
3D AAT 502 Finishing Polish contains ZERO crystalline silica. This is very important. Historically and even currently in the world today, many compounds and polishes contain this hazardous mineral.
Inhaling crystalline silica can lead to serious, sometimes fatal illnesses including silicosis, lung cancer, tuberculosis (in those with silicosis), and chronic obstructive pulmonary disease (COPD). In addition, silica exposure has been linked to other illnesses including renal disease and other cancers.
Here at 3D Products, our goal is to not only create world class products that are environmentally green but also completely safe for our customers. Our compounds, polishes and all-in-one products are all 100% free of any crystalline silica to keep you safe.
Crystalline Silica is nothing to mess around with, if you breathe it into your lung’s chances are really high it will cause life-long health issues and worse. Before you purchase any brand of compound, polish, or all-in-one, make sure the label and any accompanying information clearly states the product is safe and does not contain crystalline silica. You can trust the 3D brand; we look out for you.
- FAST fine-cut polish removes holograms, fines swirls and scratches.
- Adaptive Abrasive Technology – Provides both mechanical and chemical cutting action.
- Chemically tuned for both hard and soft paints.
- Finishes out hologram free with rotary polisher and soft foam finishing pad.
- Works with both rotary and orbital polishers plus foam, microfiber, or wool pads.
- Body shop safe – Fresh paint safe – Silicone free!
- Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
- Water-based – No harsh solvents or foul odors!
- Wipes off easy! – Won’t clog buffing pads –– Competitive pricing.
£29.99
Unit price per
3D Glass Polish is a cerium-oxide based polish designed to remove swirls, scratches, wiper marks, and water spots from automobile glass surfaces. Our unique formula is easy to use requiring minimal elbow grease to apply and wipe off while providing superior ‘like new’ vision and clarity.
From £14.99
Unit price perThis bundle contains ;
501 Cutting Compound
502 Finishing Polish
Choose your size below you can either have a 236ml set or a 946ml set.
3D AAT 501 Cutting Compound is the first part in a two-part system for use in body shops to cut and finish after sanding. Body shops are considered high-speed or production shops, the collision repair must be made in a timely manner followed by paint work and final polishing steps. Body shop technicians need a compound that works fast and delivers true results, that is the results you see are the results you get.
Many compounds mask scratches and swirls with fillers or oils – we don’t make these kinds of products here at 3D. What you see is what you get – true paint correction with zero hiding.
3D AAT 501 Cutting Compound is our entry level compound. While it’s our entry level compound and the price reflects this, it’s as good, and in most cases better, than any other brand of compound. If your shop is looking for an inexpensive fast cutting compound that works better than the usual suspects, then try 3D AAT 501 Cutting Compound.
3D AAT 502 Finishing Polish is the second part in a two-part system for use in body shops to cut and finish after sanding. Body shops are considered high-speed or production shops, the collision repair must be made in a timely manner followed by paint work and final polishing steps. Body shop technicians need a polish that works fast and delivers customer pleasing true results that last.
Many polishes mask scratches and swirls with fillers or oils – here at 3D Products, we don’t make these kinds of products. What you see is what you get – true paint correction with a super high gloss shine.
3D AAT 502 Finishing Polish is our entry level polish. Even though it’s our entry level polish and the price reflects this, it’s as good and in most cases better than any other brand of polish on the market. If your shop is looking for an inexpensive top performing polish that delivers consistent results over the widest spectrum of paint systems, then try 3D AAT 502 Finishing Polish.
Once you experience how capable this polish is for maximizing the gloss, clarity, and shine after the compounding step with a 3D compound, you’ll never want to be without it. The adaptive abrasive technology used in 3D AAT 502 Finishing Polish removes haze and holograms after aggressive compounding step or use as by itself to remove fine swirls, scratches, water spots and oxidation.
The perfect entry level & affordable compound and polish duo that still cuts & finishes fast!
£39.99
Unit price perBundle includes;
1 x 473ml 3D Glass Polish
1 x 3D Logo Sprayer Bottle & Grey Sprayer Head
1 x 3" 3D Rayon Felt Pad
1 x 5"3D Rayon Felt Pad
- Cerium oxide based polish helps to remove swirls, scratches, wiper marks & water spots from glass and windows
- Great for dulled and tarnished car glass to help improve vision and clarity
- Helps to restore original transparency and brightness
- Minimum Elbow Grease Required! Easy application directly onto surface with effortless wipe-off
- Long Open Time - Less product goes a longer way for efficient results
- Can be used to prep glass surfaces before applying a glass coating
- For best results, use a high speed rotary polisher with a felt pad
3D Glass Polish is a cerium-oxide based polish designed to remove swirls, scratches, wiper marks, and water spots from automobile glass surfaces. Our unique formula is easy to use requiring minimal elbow grease to apply and wipe off while providing superior ‘like new’ vision and clarity.