Short pile universal towel for interior and exterior cleaning, works exceptionally well for coating removal.
Proudly manufactured & blended in the USA with premium raw materials.
Sort by:
7 products
7 products
This is a professional grade panel wipe
Generically these types of products are called panel wipes. As the name implies, you use these types of product to wipe down a panel. The idea being to chemically dissolve and remove any polishing oils or other substances left on the surface of car paint typically after any paint correction steps that have been performed.
Normal steps for a full exterior detail
When it comes to applying a conventional car wax or synthetic sealant, the normal steps include,
- Wash and dry the car.
- Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
- Compound and polish the paint to remove any below surface defects like swirls and scratches.
- Apply a car wax or synthetic paint coating.
After step 3, you can simply move onto the final step, which is applying a car wax or synthetic paint sealant without doing anything else to the paint. Just apply the wax or sealant, wait for it to dry to a haze, wipe off the dried product and you’re done.
With ceramic paint coatings – there’s an extra step
With a ceramic paint coating there is an EXTRA STEP required before installing the coating and this is the most important step because the product you use must be strong enough to remove any residual polishing oils or other substances but safe enough to prevent dulling or marring the paint.
The normal steps to install a ceramic coating include,
- Wash and dry the car.
- Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
- Compound and polish the paint to remove any below surface defects like swirls and scratches.
- Use a panel wipe to chemically strip each body panel to prep it for the coating.
- Install the ceramic coating section by section, panel by panel.
* Step 4 is the extra step. Herein lies the problem.
Clearcoat paints are scratch-sensitive - Generally speaking, modern clearcoat paints tend to be harder than traditional single stage paints like lacquers and enamels used before 1980. While most clearcoat paints are harder than old school paints, they still scratch very easy. And because the clearcoat is like a WINDOW to the color coat, (called the basecoat), any swirls, scratches, scuffs, or towel marring – shows up like a sore thumb. This is because when you scratch something clear, the scratch is opaque or whitish in color and any medium to dark colored basecoats will reflect these whitish scratches back to our eyes making them very easy to see.
Most solvents are not good lubricants - The historic problem with most panel wipe or paint surface prep sprays, are the solvents used to do the actual work of dissolving polishing oils and other foreign substances are NOT good lubricants.
Now let me tie this together - If you take a conventional panel wipe, (a product that’s not a good lubricant), and wipe down a scratch-sensitive clearcoat, it’s really easy and also very common for this process to put towel marring back into the paint you just invested hours into buffing to perfect. In case you don’t know, towel marring is the fluffy way to describe light towel scratches.
See the problem? You need to use a panel wipe to prep the paint for the coating but using the panel wipe risks putting scratches back into the paint.
So, after you've invested hours into doing all the prep work, this includes washing, drying, claying, compounding, and polishing, the paint is now PERFECT – and the next step is to take a panel wipe and scratch the paint. Not good.
Here’s the good news… 3D isn’t no conventional car wax company and 3D WIPE isn’t any old conventional panel wipe. It’s better because 3D’s chemists are the best in the industry.
3D WIPE is a pro-grade product that is formulated to strip the paint without marring the paint at the same time. 3D Wipe is a water-based panel wipe that uses highly refined and filtered water as a base. We use a reverse osmosis process to remove all the total dissolved solids out of the water. Why? Because the water is the foundation for the formula. For cleaning ability, 3D WIPE uses a proprietary blend of surfactants.
3D WIPE is both safe and effective. It’s strong enough to remove any oils or other substances that would interfere with the proper bonding of the 3D Ceramic Coatingto the paint but offers more than enough lubrication to prevent accidental towel marring. Plus – unlike most panel wipes, it’s safe for you, your skin and it smells great too.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - This is a panel wipe, which is a product used to chemically strip a paint surface before installing a ceramic paint coating.
What does it do? - After compounding and polishing paint, or any other surface prep process but before installing the coating.
When do you use it? - After compounding and polishing paint, or any other surface prep process but before installing the coating.
Why use 3D Wipe over other options? - To make sure the paint surface is surgically clean so the coating can make a proper bond for best longevity and performance.
- Water-based solvent safely removes residual polishing oils.
- High lubricity formula helps to prevent accident towel marring.
- Perfectly preps paint for the proper bonding for 3D Ceramic Coating.
- Can be used on paint, glass, plastic, rubber, and metal surfaces.
- Fresh, clean, pleasant scent – no harsh or foul odors.
- The perfect pre-coating prep for 3D Ceramic Coating or any coating.
- Green technology, Earth friendly and biodegradable.
- Prop 65 & V.O.C. compliant.
Enter the realm of automotive excellence with the 3D GLW Series SiO2 Ceramic Detailer, the quintessential instant detailer that raises the bar to new heights. This extraordinary formula goes beyond traditional detailing, introducing next-level hydrophobic and oleophobic protection. When you apply this instant detailer, you're not just adding a touch of shine; you're creating a fortress of defense against the elements. Water and contaminants will bead up and roll off your vehicle's surface with ease, ensuring that your car remains pristine, even when faced with challenging weather conditions.
But that's not all; the 3D GLW Series SiO2 Ceramic Detailer is also your secret weapon for prolonging the life of your wax, sealant, or ceramic coating. It's a ceramic coating booster spray that doesn't just maintain the existing protective layers; it enhances and extends their longevity. With every application, you're fortifying the surface and clear coat, making them more resilient and durable. The result is a vehicle that not only boasts an undeniable glossy shine but also stands as a testament to your commitment to its long-term well-being. It's more than a detailer; it's a guardian of your car's brilliance and protection.
HYPER GLOSS FINISH GLW Series SiO2 Ceramic Detailer gives your paint an ultimate hyper gloss, deep shine finish while extending the life of your existing car wax, paint sealants, and ceramic coating.
PEAK HYDROPHOBIC PROTECTION Experience the ultimate water-repellent effect with our hydrophobic top coat. Harnessing the power of Silicon Dioxide (SiO2) polymers, water beads up and slides off your car effortlessly, making it easier to maintain a clean and spotless exterior.
CERAMIC COATING BOOSTER Easy spray on and wipe off in seconds. GLW Series SiO2 Ceramic Detailer is safe on paint, glass, wheels, chrome, grills, and trim.
SIMPLIFIED DETAILING ROUTINE Simply spray and wipe off in seconds to reveal a stunning hyper glow finish. By extending the lifespan of your current waxes, sealants, and coatings, this detailing spray saves you time on frequent reapplications.
3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.
Step into the future of car care with the 3D GLW Series SiO2 Ceramic Wax, a game-changing product designed to redefine your car's appearance and protection. This wax offers more than just a shine; it provides an effortless and ultra-slick application, instantly transforming your vehicle into a hyper-glossy masterpiece. As you wipe it on and wipe it off, you're not just creating a visual spectacle; you're also adding a robust layer of SIO2 Ceramic protection. This is no ordinary wax; it's a barrier against the elements. Rain, water spots, dirt, and road grime will all find themselves repelled by the sheer hydrophobic power of this advanced formula.
But the benefits don't stop at aesthetics and protection. The 3D GLW Series SiO2 Ceramic Wax goes further, sealing your car's clear coat against the relentless assault of contaminants. It's a comprehensive solution that ensures your vehicle not only looks its best but also remains resilient in the face of daily challenges. The result is a car that boasts an enduring shine and protection, a testament to your dedication to its care and longevity. With this product, you're not just waxing; you're safeguarding your car's brilliance and clear coat for the long haul.
ULTRA-SLICK GLOSS FINISH High gloss GLW Series SiO2 Ceramic Wax makes your paint vibrant as ever. Now anyone can achieve maximum glow with 3D’s GLW Series wax.
PEAK HYDROPHOBIC PROTECTION Advanced formula contains ceramic Silicon Dioxide (SiO2) technology that seals your car’s paint with a perfect layer of hyper hydrophobic protection against water spots, brake dust, road grime, and other contaminants for a long period of time.
HYPER EFFECTIVE GLOSS Simply apply with applicator and wipe off with a microfibre towel to reveal the ultimate glow. No need for rubbing, buffing, or mess like with conventional wax.
NEXT-LEVEL GLOW Whether you’re a seasoned or beginner at-home detailing enthusiast, GLW Ceramic Wax makes it easy to enhance the appearance of your vehicle.
3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.
Don’t skimp when it comes to towels
Much of the focus for any detailing project is usually placed on products and of course this is important. But the quality of your microfiber towels are just as important. And, when it comes to your car’s paint it’s actually more important. Why? Because everything that touches your car’s finish MUST be clean, soft, and uncontaminated. It takes hours to perform paint correction and only seconds to put scratches back into the paint. Avoid the risk and make sure you have plenty of clean, soft, uncontaminated microfibre towels in your detailing arsenal to keep your car’s finish swirls and scratch-free.
It's also vitally important to have clean laundry hampers or storage containers to store dirty microfibre towels until you’re ready to do your microfibre laundry as well as a clean place to store your microfibre towels after they come out of the dryer and are inspected and folded for future use.
The most common root cause for swirls and scratches in your car’s finish comes from the things that touch the paint and for must of us this means the wash mitts, microfibre towels and drying towels. If you don’t already have a process in place to take care of your microfiber tools – start today. It’s much easier and faster to avoid swirls and scratches because your microfibre towels are clean, soft, plush, and uncontaminated than it does to machine compound and polish your car.
Use 3D Towel Kleen to wash and maintain your towels to get the maximum performance and longevity out of your 3D towel collection.
What is it?
A 80/20 blend of polyester to polyamide microfibre cloth that is an exceptionally soft. These towels are laser-cut so they are edgeless in design to reduce the risk of marring paint. These 400-gram microfibre towels are purpose-designed for buffing off polishes, waxes & paint sealants as well as ceramic paint coatings.
What does it do?
3D microfibre towels safely remove waxes and sealants off car paint more effectively than conventional options like cotton terrycloth bath towels, t-shirts, diapers, and cheesecloth. The microscopic size of the individual filaments excel at both absorbing and adsorbing both liquids and dried films like compound, polish, and wax residues.
When do I use it?
After applying a coat of car wax, synthetic sealant or ceramic paint coating and then waiting for the recommended drying or flash time and then wiping any excess product off the surface. Anytime you need to remove the residues left by compounds, polishes, and all-in-ones.
Why use 3D microfibre towels over other options?
The 3D brand of microfibre towels were specifically sourced with the expectation for offering our customers a premium quality microfibre towel. There are so many cheap microfibre towels on the market and like the old saying goes,
You get what you pay for.
- Microfibre Applicator Pad
- 10cm x 12cm
- 5 Pack
