12 products
Sort by:
12 products
12 products
Oxidation is the most common problem we all experience with any metal surface, including aluminum wheels or diamond rings, it’s the nature of exposed metal surfaces to oxidize and tarnish when exposed to the air.
3D Metal Polish is unique in the metal polish category because unlike the majority of other metal polishes on the market, our polish does not use harsh chemical cleaners or solvents, nor does it rely on old school abrasive technology to remove the oxidation.
The chemists at 3D Products started with the goal being how to remove oxidation and restore a brilliant mirror shine without dulling or scratching the surface in the process. They came up with a proprietary blend of chemical cleaners and an abrasive technology that can remove oxidation without at the same time leaving its own scratches behind in the surface. The result is a metal polish that can remove years of oxidation and tarnish while creating a better-than-new mirror shine.
With many metal polishes, you’ll smell the distinct foul odor of ammonia, this is the old school way of chemically attacking oxidation. Most metal polishes also use archaic abrasive technology which is cheap. Does this approach work? Yes and no. Sure, these types of products will remove oxidation and make metal shine, but simply an outdated process that will never produce the same or better results than 3D Metal Polish.
- Powerful proprietary formula removes years of oxidation fast.
- Use as an ultra-fine polish for sensitive metal surfaces like jewellery.
- Apply by hand or machine including orbital and rotary polisher.
- Hybrid formula allows you to control cut and polish.
- Contains no ammonia or other harsh chemicals or solvents.
- Green technology, Earth friendly, Prop 65 and V.O.C. compliant.
This is a professional grade panel wipe
Generically these types of products are called panel wipes. As the name implies, you use these types of product to wipe down a panel. The idea being to chemically dissolve and remove any polishing oils or other substances left on the surface of car paint typically after any paint correction steps that have been performed.
Normal steps for a full exterior detail
When it comes to applying a conventional car wax or synthetic sealant, the normal steps include,
Wash and dry the car.
Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
Compound and polish the paint to remove any below surface defects like swirls and scratches.
Apply a car wax or synthetic paint coating.
After step 3, you can simply move onto the final step, which is applying a car wax or synthetic paint sealant without doing anything else to the paint. Just apply the wax or sealant, wait for it to dry to a haze, wipe off the dried product and you’re done.
With ceramic paint coatings – there’s an extra step
With a ceramic paint coating there is an EXTRA STEP required before installing the coating and this is the most important step because the product you use must be strong enough to remove any residual polishing oils or other substances but safe enough to prevent dulling or marring the paint.
The normal steps to install a ceramic coating include,
Wash and dry the car.
Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
Compound and polish the paint to remove any below surface defects like swirls and scratches.
Use a panel wipe to chemically strip each body panel to prep it for the coating.
Install the ceramic coating section by section, panel by panel.
* Step 4 is the extra step. Herein lies the problem.
Clearcoat paints are scratch-sensitive - Generally speaking, modern clearcoat paints tend to be harder than traditional single stage paints like lacquers and enamels used before 1980. While most clearcoat paints are harder than old school paints, they still scratch very easy. And because the clearcoat is like a WINDOW to the color coat, (called the basecoat), any swirls, scratches, scuffs, or towel marring – shows up like a sore thumb. This is because when you scratch something clear, the scratch is opaque or whitish in color and any medium to dark colored basecoats will reflect these whitish scratches back to our eyes making them very easy to see.
Most solvents are not good lubricants - The historic problem with most panel wipe or paint surface prep sprays, are the solvents used to do the actual work of dissolving polishing oils and other foreign substances are NOT good lubricants.
Now let me tie this together - If you take a conventional panel wipe, (a product that’s not a good lubricant), and wipe down a scratch-sensitive clearcoat, it’s really easy and also very common for this process to put towel marring back into the paint you just invested hours into buffing to perfect. In case you don’t know, towel marring is the fluffy way to describe light towel scratches.
See the problem? You need to use a panel wipe to prep the paint for the coating but using the panel wipe risks putting scratches back into the paint.
So, after you've invested hours into doing all the prep work, this includes washing, drying, claying, compounding, and polishing, the paint is now PERFECT – and the next step is to take a panel wipe and scratch the paint. Not good.
Here’s the good news… 3D isn’t no conventional car wax company and 3D WIPE isn’t any old conventional panel wipe. It’s better because 3D’s chemists are the best in the industry.
3D WIPE is a pro-grade product that is formulated to strip the paint without marring the paint at the same time. 3D Wipe is a water-based panel wipe that uses highly refined and filtered water as a base. We use a reverse osmosis process to remove all the total dissolved solids out of the water. Why? Because the water is the foundation for the formula. For cleaning ability, 3D WIPE uses a proprietary blend of surfactants.
3D WIPE is both safe and effective. It’s strong enough to remove any oils or other substances that would interfere with the proper bonding of the 3D Ceramic Coating to the paint but offers more than enough lubrication to prevent accidental towel marring. Plus – unlike most panel wipes, it’s safe for you, your skin and it smells great too.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - This is a panel wipe, which is a product used to chemically strip a paint surface before installing a ceramic paint coating.
What does it do? - After compounding and polishing paint, or any other surface prep process but before installing the coating.
When do you use it? - After compounding and polishing paint, or any other surface prep process but before installing the coating.
Why use 3D Wipe over other options? - To make sure the paint surface is surgically clean so the coating can make a proper bond for best longevity and performance.
Water-based solvent safely removes residual polishing oils.
High lubricity formula helps to prevent accident towel marring.
Perfectly preps paint for the proper bonding for 3D Ceramic Coating.
Can be used on paint, glass, plastic, rubber, and metal surfaces.
Fresh, clean, pleasant scent – no harsh or foul odors.
The perfect pre-coating prep for 3D Ceramic Coating or any coating.
Green technology, Earth friendly and biodegradable.
Prop 65 & V.O.C. compliant.
Product Details
This is a professional grade panel wipe
Generically these types of products are called panel wipes. As the name implies, you use these types of product to wipe down a panel. The idea being to chemically dissolve and remove any polishing oils or other substances left on the surface of car paint typically after any paint correction steps that have been performed.
Normal steps for a full exterior detail
When it comes to applying a conventional car wax or synthetic sealant, the normal steps include,
Wash and dry the car.
Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
Compound and polish the paint to remove any below surface defects like swirls and scratches.
Apply a car wax or synthetic paint coating.
After step 3, you can simply move onto the final step, which is applying a car wax or synthetic paint sealant without doing anything else to the paint. Just apply the wax or sealant, wait for it to dry to a haze, wipe off the dried product and you’re done.
With ceramic paint coatings – there’s an extra step
With a ceramic paint coating there is an EXTRA STEP required before installing the coating and this is the most important step because the product you use must be strong enough to remove any residual polishing oils or other substances but safe enough to prevent dulling or marring the paint.
The normal steps to install a ceramic coating include,
Wash and dry the car.
Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
Compound and polish the paint to remove any below surface defects like swirls and scratches.
Use a panel wipe to chemically strip each body panel to prep it for the coating.
Install the ceramic coating section by section, panel by panel.
* Step 4 is the extra step. Herein lies the problem.
Clearcoat paints are scratch-sensitive - Generally speaking, modern clearcoat paints tend to be harder than traditional single stage paints like lacquers and enamels used before 1980. While most clearcoat paints are harder than old school paints, they still scratch very easy. And because the clearcoat is like a WINDOW to the color coat, (called the basecoat), any swirls, scratches, scuffs, or towel marring – shows up like a sore thumb. This is because when you scratch something clear, the scratch is opaque or whitish in color and any medium to dark colored basecoats will reflect these whitish scratches back to our eyes making them very easy to see.
Most solvents are not good lubricants - The historic problem with most panel wipe or paint surface prep sprays, are the solvents used to do the actual work of dissolving polishing oils and other foreign substances are NOT good lubricants.
Now let me tie this together - If you take a conventional panel wipe, (a product that’s not a good lubricant), and wipe down a scratch-sensitive clearcoat, it’s really easy and also very common for this process to put towel marring back into the paint you just invested hours into buffing to perfect. In case you don’t know, towel marring is the fluffy way to describe light towel scratches.
See the problem? You need to use a panel wipe to prep the paint for the coating but using the panel wipe risks putting scratches back into the paint.
So, after you've invested hours into doing all the prep work, this includes washing, drying, claying, compounding, and polishing, the paint is now PERFECT – and the next step is to take a panel wipe and scratch the paint. Not good.
Here’s the good news… 3D isn’t no conventional car wax company and 3D WIPE isn’t any old conventional panel wipe. It’s better because 3D’s chemists are the best in the industry.
3D WIPE is a pro-grade product that is formulated to strip the paint without marring the paint at the same time. 3D Wipe is a water-based panel wipe that uses highly refined and filtered water as a base. We use a reverse osmosis process to remove all the total dissolved solids out of the water. Why? Because the water is the foundation for the formula. For cleaning ability, 3D WIPE uses a proprietary blend of surfactants.
3D WIPE is both safe and effective. It’s strong enough to remove any oils or other substances that would interfere with the proper bonding of the 3D Ceramic Coating to the paint but offers more than enough lubrication to prevent accidental towel marring. Plus – unlike most panel wipes, it’s safe for you, your skin and it smells great too.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - This is a panel wipe, which is a product used to chemically strip a paint surface before installing a ceramic paint coating.
What does it do? - After compounding and polishing paint, or any other surface prep process but before installing the coating.
When do you use it? - After compounding and polishing paint, or any other surface prep process but before installing the coating.
Why use 3D Wipe over other options? - To make sure the paint surface is surgically clean so the coating can make a proper bond for best longevity and performance.
Water-based solvent safely removes residual polishing oils.
High lubricity formula helps to prevent accident towel marring.
Perfectly preps paint for the proper bonding for 3D Ceramic Coating.
Can be used on paint, glass, plastic, rubber, and metal surfaces.
Fresh, clean, pleasant scent – no harsh or foul odors.
The perfect pre-coating prep for 3D Ceramic Coating or any coating.
Green technology, Earth friendly and biodegradable.
Prop 65 & V.O.C. compliant.
Experience the power of BDX, an acid-free brake dust cleaner and iron oxide remover that quickly eliminates contamination from the surface of your vehicle. This acid-free formula is designed to effectively eliminate iron contamination, brake dust, and fallout and more from your vehicle's surfaces. Whether you're dealing with stubborn iron particles on your paint or brake dust on your wheels, BDX provides a safe and efficient solution.
BDX's gentle yet powerful formulation is completely safe to use on both painted surfaces and wheels, ensuring a perfect finish and professional results. Its easy-to-use application simplifies the decontamination process, allowing you to restore your car's original shine with minimal effort. Simply spray on, let it work its magic, and rinse off to reveal a clean, contaminant-free surface.
Trusted by car enthusiasts and professionals alike, BDX iron oxide remover and brake dust cleaner is the ideal choice for maintaining your vehicle's appearance. Keep your car looking its best and protect your investment with BDX, the reliable and effective solution for iron and brake dust removal. Say goodbye to stubborn contaminants and hello to a pristine finish with BDX.
Introducing Universal Dressing, the non-greasy all-purpose solution for bringing back the original beauty and shine of your vehicle. Its universal application makes it perfect for all trim, whether it is rubber, vinyl, tires, or more. Say goodbye to dull surfaces as Universal Dressing rejuvenates and restores, leaving behind a clean, glossy finish that enhances the appearance of your car.
Quick Aerosol Spray Trim Restore
Long Lasting Shine and Protection
Restores Trim, Plastics, Vinyl and Rubber
Non-Greasy, Dry-to-the-Touch Formula
Made in the USA
Product Details
Revive your vehicle's trim with Instant Shine, a quick aerosol spray trim restore that brings back its original luster in an instant. This powerful formula not only restores trim but also rejuvenates plastics, vinyl, and rubber surfaces, giving them a like-new appearance. With Instant Shine, you can enjoy long-lasting shine and protection that enhances the overall look of your vehicle without the greasy residue.
Experience the convenience of a dry-to-the-touch finish as Instant Shine effortlessly revitalizes your car's exterior. Its non-greasy formula ensures a clean, crisp appearance, making it ideal for regular maintenance. Say goodbye to dull surfaces and hello to a refreshed look with Instant Shine, the ultimate solution for keeping your vehicle looking its best.
ONE EASY STEP … 3D Upholstery & Carpet Shampoo cleans and deodorizes carpet, upholstery and more with one simple step!
HIGH FOAM … Our premium high foaming formula is tough on spots and stains, providing the ultimate deep clean!
ORIGINAL BEAUTY … The optical brighteners work to bring back the original beauty and texture from the surface for a 'like new' look and feel!
FRESH LEMON SCENT … Leave your carpet and upholstery clean, beautiful, and full of our refreshing lemon scent!
PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a carpet and upholstery cleaner that's tried and trusted.
Description
The science behind why you want a high foaming upholstery and carpet shampoo
One of the reasons everyone enjoys buying a brand-new car is because it’s new, meaning the outside is clean and shiny and even more noticeable - the inside is so clean and sterile. No one else has soiled the seats, the arm rests, the steering wheel, the center console, or the carpets. Part of the reason the inside of a brand-new car feels luxurious is because it’s so fresh and clean. It’s a universal phenomenon that people from all walks of life, describe a new car as having that new car smell. And this is because – everything is still spic-and-span clean, kind of like an operating room in a hospital – everything looks and smells surgically clean.
It’s this clean factor, this overpowering perception that the inside of a new car is 100% completely clean and germ-free that makes getting into a new car so inviting, so welcoming. You want to get inside of a brand-new car because you know it’s so clean.
Sad news is, we can’t all simply go down to the dealership and buy a new car just because the inside of our current car loses that new car smell and starts to show signs of normal, day-in, day-out wear-n-tear.
What we can do is clean it. And the parts or areas of a car that get the dirtiest are any part or area that is made from some type of fabric, upholstery, or carpeting. Cleaning fabric, upholstery or carpeting is challenging because unlike smooth hard surfaces, where the dirt and grime is sitting on the surface and easy to wipe-off, with fabric, upholstery or carpeting, the dirt and grime can be both on the material and in the material.
Another difficult aspect of cleaning fabric, upholstery or carpeting is once any liquids penetrate past the outer surface, or get behind or under the surface of the material being cleaned – how do you then remove any excess moisture? You need to remove any liquids or moisture, or this can lead to the formation of mold and mildew where you cannot see it or reach it to clean it.
This is why we made 3D’s Upholstery & Carpet Shampoo to be a high foaming cleaner. Foam is basically suds or bubbles. Bubbles are the product (a liquid) enveloped around pockets of air and it is these foam bubbles that sit on TOP of the surface where you want them so you can work them against the surface of the material and then wipe-off the residues.
This simple foam structure of the cleaner helps you to effectively clean the material while avoiding getting too much liquid into whatever is behind the surface of the fabric, upholstery, or carpeting.
In the case of cloth seats, there is foam cushioning under the top layer of fabric. Foam absorbs liquids. If you put a straight liquid cleaner on to the surface of a cloth-covered foam seat, a lot of the liquid will saturate past the cloth surface and go into the foam. Now the problem becomes, how can you get this liquid it out? Unremoved liquids are what can lead to mold and mildew issues inside your car’s seats. This same principal applies to carpets and even cloth-covered door panels, arm rests or center consoles.
When it comes to cleaning any type of fabric by hand – you want a high foaming cleaner so the cleaner will sit on the top surface. And that’s the science behind 3D’s high foaming Upholstery & Carpet Cleaner.
Besides the high foaming feature, 3D’s Upholstery & Carpet Cleaner uses 3D’s green technology to create a wide-spectrum cleaner that can tackle just about any dirt, grime, or stain that’s common to car interiors. This wide-spectrum cleaner also includes a proprietary bacterial enzyme, which completely eliminates foul odors, not just mask them over cover them up.
And to really add some zing to the clean, we included what are known in chemistry jargon optical brighteners. These optical brighteners working with the cleaners, restore a crisp, richness-of-color to the pigments and dyes used to give your car it’s unique color scheme.
And 3D’s chemists didn’t stop there, they also made sure this product leaves a residue-free surface to avoid future dirt build-up.
If you want your car’s interior to look, feel and smell like a brand-new car, use 3D’s Upholstery & Carpet Cleaner to hand-clean any cloth, fabric, carpet, or upholstery. You can even use it to wipe down hard, non-absorbing surfaces like vinyl and modern coated leather.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Foaming upholstery, fabric, and carpet cleaner
What does it do? - Cleans carpet, fabrics, and upholstery by removing ground-in dirt, grime, food stains, liquid spills, pet stains, cosmetic stains, skin lotions stains and body oils.
When do you use it? - After first thoroughly vacuuming and removing any loose dirt and debris out of weave of fabrics, carpeting and textiles.
Why use 3D Upholstery & Carpet Shampoo over other options? - This high foaming carpet and upholstery cleaner keeps the cleaning foam on the surface where you want it, not simply soaking and saturating into and under the surface where you don’t want it. Powerful cleaning agents, optical brighteners, and bacterial enzyme odor eliminators clean while restoring a factory new bright appearance with a residue-free, fresh lemon scent.
Diluting 3D Upholstery & Carpet Cleaner
3D’s Upholstery & Carpet Cleaner is sold as a concentrate. Before using this product, you must dilute it. The dilution ratio for general cleaning is a ratio of 1:16 – or 1 part concentrate to 16 parts water. The number 16 in the expressed ratio is the ratio number.
Dilution Formula
When using U.S. Standard ounces as our unit of measure, a dilution formula is expressed like this, Final volume divided by ratio number = ounces to add to final volume container.
Dilution for a 32-ounce spray bottle
To figure out a dilution level to make a 32-ounce bottle of ready-to-use product, here’s the formula. 32 divided by ratio number = number of ounces to add to 32-ounce bottle. To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 32 divided by 16 = 2 ounces per 32-ounce bottle.
Dilution for a 1-gallon jug
Using the same above formula, only substituting 128 ounces for 32 ounces but still using 16 as the ratio number, the dilution equation would look like this, 1-gallon = 128 ounces. 128 divided by ratio number = ounces per gallon.
To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 128 divided by 16 = 8 ounces per gallon.
In simple terms, using a clean, 1-gallon mixing container, you add 8 ounces of upholstery & carpet cleaner concentrate and then fill the rest of the container with clean water and mix thoroughly. This will make 1-gallon of ready-to-use upholstery & carpet cleaner at a 1:16 dilution ratio.
Next you will want to pour this mixture into a clean spray bottle. To create a thick foam, you’ll also want a foaming spray head. A normal spray head will not work as well as a foaming spray head.
High foaming formula stays on top of surface – less saturation under surface.
3D’s proprietary bacterial enzymes completely eliminate foul odors.
Optical brighteners restore and enhance original colors.
Cleans and removes dirt, grime, drink spills, food stains, body oils, pet stains, etc.
Safe for all fabrics, upholstery, and carpets – even vinyl and coated leather.
Concentrated formula – One 16-ounce bottle makes 2 gallons of RTU product
Customer pleasing, fresh lemon scent leaves zero residues behind.
Hypo allergenic – won’t cause allergic reactions – formulated for use by hand.
3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
Directions
IMPORTANT: Always work on a cool surface in the shade.
Professional Technique Tip – Dry Extraction - Always start by vacuuming any upholstery or carpet to be cleaned. This is called dry extraction. The idea is to remove as much of any loose dirt possible by lifting it out of or off of the surface. By removing dry, loose dirt first – you don’t risk liquefying this dirt with your spray liquid cleaner and then having to remove it. It’s easier, faster, and more effective to remove loose dirt via air extraction or even via blowing out the fabric, carpet, or upholstery with compressed air than it is to remove it once it’s wet.
Step 1: After vacuuming, spray 3D Upholstery & Carpet Cleaner directly onto surface to be cleaned and immediately scrub the surface with a horsehair or textile brush.
Step 2: Use a clean, absorbent cotton terrycloth towel or absorbent microfiber towel and wipe and blot the cleaner and any emulsified dirt off of and/or out of the surface. Repeat this step switching to a fresh, dry towel often to absorb and remove as much residue as possible.
Step 3: Re-vacuum surface to lift out any remaining residues and then give the surface a final wipe with a dry towel.
Step 4: After all interior surfaces have been cleaned, wiped and/or blotted dry, place an air mover, or fan inside car and turn to the highest setting. Roll windows down about 1 inch so the air mover or fan can circulate air in and out of the car to evaporate and remove any remaining moisture. Run fan for at least one hour in normal ambient temperatures and humidity. Longer for colder, moist climates.
Product Details
Overview
ONE EASY STEP … 3D Upholstery & Carpet Shampoo cleans and deodorizes carpet, upholstery and more with one simple step!
HIGH FOAM … Our premium high foaming formula is tough on spots and stains, providing the ultimate deep clean!
ORIGINAL BEAUTY … The optical brighteners work to bring back the original beauty and texture from the surface for a 'like new' look and feel!
FRESH LEMON SCENT … Leave your carpet and upholstery clean, beautiful, and full of our refreshing lemon scent!
PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a carpet and upholstery cleaner that's tried and trusted.
Description
The science behind why you want a high foaming upholstery and carpet shampoo
One of the reasons everyone enjoys buying a brand-new car is because it’s new, meaning the outside is clean and shiny and even more noticeable - the inside is so clean and sterile. No one else has soiled the seats, the arm rests, the steering wheel, the center console, or the carpets. Part of the reason the inside of a brand-new car feels luxurious is because it’s so fresh and clean. It’s a universal phenomenon that people from all walks of life, describe a new car as having that new car smell. And this is because – everything is still spic-and-span clean, kind of like an operating room in a hospital – everything looks and smells surgically clean.
It’s this clean factor, this overpowering perception that the inside of a new car is 100% completely clean and germ-free that makes getting into a new car so inviting, so welcoming. You want to get inside of a brand-new car because you know it’s so clean.
Sad news is, we can’t all simply go down to the dealership and buy a new car just because the inside of our current car loses that new car smell and starts to show signs of normal, day-in, day-out wear-n-tear.
What we can do is clean it. And the parts or areas of a car that get the dirtiest are any part or area that is made from some type of fabric, upholstery, or carpeting. Cleaning fabric, upholstery or carpeting is challenging because unlike smooth hard surfaces, where the dirt and grime is sitting on the surface and easy to wipe-off, with fabric, upholstery or carpeting, the dirt and grime can be both on the material and in the material.
Another difficult aspect of cleaning fabric, upholstery or carpeting is once any liquids penetrate past the outer surface, or get behind or under the surface of the material being cleaned – how do you then remove any excess moisture? You need to remove any liquids or moisture, or this can lead to the formation of mold and mildew where you cannot see it or reach it to clean it.
This is why we made 3D’s Upholstery & Carpet Shampoo to be a high foaming cleaner. Foam is basically suds or bubbles. Bubbles are the product (a liquid) enveloped around pockets of air and it is these foam bubbles that sit on TOP of the surface where you want them so you can work them against the surface of the material and then wipe-off the residues.
This simple foam structure of the cleaner helps you to effectively clean the material while avoiding getting too much liquid into whatever is behind the surface of the fabric, upholstery, or carpeting.
In the case of cloth seats, there is foam cushioning under the top layer of fabric. Foam absorbs liquids. If you put a straight liquid cleaner on to the surface of a cloth-covered foam seat, a lot of the liquid will saturate past the cloth surface and go into the foam. Now the problem becomes, how can you get this liquid it out? Unremoved liquids are what can lead to mold and mildew issues inside your car’s seats. This same principal applies to carpets and even cloth-covered door panels, arm rests or center consoles.
When it comes to cleaning any type of fabric by hand – you want a high foaming cleaner so the cleaner will sit on the top surface. And that’s the science behind 3D’s high foaming Upholstery & Carpet Cleaner.
Besides the high foaming feature, 3D’s Upholstery & Carpet Cleaner uses 3D’s green technology to create a wide-spectrum cleaner that can tackle just about any dirt, grime, or stain that’s common to car interiors. This wide-spectrum cleaner also includes a proprietary bacterial enzyme, which completely eliminates foul odors, not just mask them over cover them up.
And to really add some zing to the clean, we included what are known in chemistry jargon optical brighteners. These optical brighteners working with the cleaners, restore a crisp, richness-of-color to the pigments and dyes used to give your car it’s unique color scheme.
And 3D’s chemists didn’t stop there, they also made sure this product leaves a residue-free surface to avoid future dirt build-up.
If you want your car’s interior to look, feel and smell like a brand-new car, use 3D’s Upholstery & Carpet Cleaner to hand-clean any cloth, fabric, carpet, or upholstery. You can even use it to wipe down hard, non-absorbing surfaces like vinyl and modern coated leather.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Foaming upholstery, fabric, and carpet cleaner
What does it do? - Cleans carpet, fabrics, and upholstery by removing ground-in dirt, grime, food stains, liquid spills, pet stains, cosmetic stains, skin lotions stains and body oils.
When do you use it? - After first thoroughly vacuuming and removing any loose dirt and debris out of weave of fabrics, carpeting and textiles.
Why use 3D Upholstery & Carpet Shampoo over other options? - This high foaming carpet and upholstery cleaner keeps the cleaning foam on the surface where you want it, not simply soaking and saturating into and under the surface where you don’t want it. Powerful cleaning agents, optical brighteners, and bacterial enzyme odor eliminators clean while restoring a factory new bright appearance with a residue-free, fresh lemon scent.
Diluting 3D Upholstery & Carpet Cleaner
3D’s Upholstery & Carpet Cleaner is sold as a concentrate. Before using this product, you must dilute it. The dilution ratio for general cleaning is a ratio of 1:16 – or 1 part concentrate to 16 parts water. The number 16 in the expressed ratio is the ratio number.
Dilution Formula
When using U.S. Standard ounces as our unit of measure, a dilution formula is expressed like this, Final volume divided by ratio number = ounces to add to final volume container.
Dilution for a 32-ounce spray bottle
To figure out a dilution level to make a 32-ounce bottle of ready-to-use product, here’s the formula. 32 divided by ratio number = number of ounces to add to 32-ounce bottle. To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 32 divided by 16 = 2 ounces per 32-ounce bottle.
Dilution for a 1-gallon jug
Using the same above formula, only substituting 128 ounces for 32 ounces but still using 16 as the ratio number, the dilution equation would look like this, 1-gallon = 128 ounces. 128 divided by ratio number = ounces per gallon.
To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 128 divided by 16 = 8 ounces per gallon.
In simple terms, using a clean, 1-gallon mixing container, you add 8 ounces of upholstery & carpet cleaner concentrate and then fill the rest of the container with clean water and mix thoroughly. This will make 1-gallon of ready-to-use upholstery & carpet cleaner at a 1:16 dilution ratio.
Next you will want to pour this mixture into a clean spray bottle. To create a thick foam, you’ll also want a foaming spray head. A normal spray head will not work as well as a foaming spray head.
High foaming formula stays on top of surface – less saturation under surface.
3D’s proprietary bacterial enzymes completely eliminate foul odors.
Optical brighteners restore and enhance original colors.
Cleans and removes dirt, grime, drink spills, food stains, body oils, pet stains, etc.
Safe for all fabrics, upholstery, and carpets – even vinyl and coated leather.
Concentrated formula – One 16-ounce bottle makes 2 gallons of RTU product
Customer pleasing, fresh lemon scent leaves zero residues behind.
Hypo allergenic – won’t cause allergic reactions – formulated for use by hand.
3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
Directions
IMPORTANT: Always work on a cool surface in the shade.
Professional Technique Tip – Dry Extraction - Always start by vacuuming any upholstery or carpet to be cleaned. This is called dry extraction. The idea is to remove as much of any loose dirt possible by lifting it out of or off of the surface. By removing dry, loose dirt first – you don’t risk liquefying this dirt with your spray liquid cleaner and then having to remove it. It’s easier, faster, and more effective to remove loose dirt via air extraction or even via blowing out the fabric, carpet, or upholstery with compressed air than it is to remove it once it’s wet.
Step 1: After vacuuming, spray 3D Upholstery & Carpet Cleaner directly onto surface to be cleaned and immediately scrub the surface with a horsehair or textile brush.
Step 2: Use a clean, absorbent cotton terrycloth towel or absorbent microfiber towel and wipe and blot the cleaner and any emulsified dirt off of and/or out of the surface. Repeat this step switching to a fresh, dry towel often to absorb and remove as much residue as possible.
Step 3: Re-vacuum surface to lift out any remaining residues and then give the surface a final wipe with a dry towel.
Step 4: After all interior surfaces have been cleaned, wiped and/or blotted dry, place an air mover, or fan inside car and turn to the highest setting. Roll windows down about 1 inch so the air mover or fan can circulate air in and out of the car to evaporate and remove any remaining moisture. Run fan for at least one hour in normal ambient temperatures and humidity. Longer for colder, moist climates.
- Restores faded and dull plastic trim and bumpers
- Renews surface to original appearance
- Long lasting shine and protection
- Non-greasy formula gets your trim looking 'like new'
- RESTORE TO ORIGINAL LOOK … 3D Trim Care is a premium trim gel that restores faded and dull plastic molding, trim, and bumpers to their original, shiny form!
- NON-GREASY … 3D Trim Care has a non-greasy formula that is easy to apply and gets deep into the surface to bring the black trim color back to life!
- LONG LASTING DURABILITY … 3D Trim Care is designed to last long and protect your plastic trim even after washing your car!
- LIKE NEW RESULTS … 3D Trim Care gives your trim that 'like new' look and is excellent for any car with plastic trims or bumpers!
- PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a trim restorer that's tried and trusted.
Description
Back in the old days, before the mid-1970s, most of the trim and many of the components on a car to give it beauty, accents and unique styling came from the use of polished, shiny metal like chrome, stainless steel, nickel, and aluminum. As the costs for these metals and their weight became more of an issue when it came to manufacturing modern fuel-efficient vehicles, less costly substitutes like plastic, vinyl and rubber were introduced.
Metal trim and components like grills, bumpers, side mirror, etc. when oxidized and weathered could easily be restored using any simple metal polish. A little rubbing with the polish and some elbow grease and voi la, you could easily restore the shine and it could hold up for years before you would have to re-polish.
Not so with materials like plastic, vinyl, and rubber. When these types of man-made materials age and weather, the fix is not as simple nor does it last as long and it’s simply the nature of the beast or the nature of the physical properties that make up whatever the material is made from.
Here at 3D Products, we don’t let modern problems stop us of from innovating modern solutions. We have a state-of-the-art research and development laboratory and a team of full-time, career PhD chemists from a wide range of chemistry backgrounds. Working as a team and fully understanding all the issues related to making a trim dressing for materials that simply don’t absorb liquids easily, they created a lotion-like formula that is refined to a high degree to enable it to penetrate deep into the tight molecular structures of materials like plastic, vinyl, and rubber. The also tweaked this formula to block-out future ultraviolet rays and water or moisture, which together these things are the foundational elements that cause oxidation or the breaking-down of these types of materials, which we see as fading, aging, and cracking.
While there is no perfect, or permanent remedy for these types of materials in open-air environments and a wide spectrum of climates, 3D Trim Care comes close.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Lotion-like restorer for all types of plastic trim, rubber, vinyl and even metal surfaces.
What does it do? - Restores a deep, dark rich shine to faded, aged exterior trim and components.
When do you use it? - After first washing and drying the surface to be treated using a normal car wash soap, all-purpose-cleaner or degreaser.
Why use 3D Trim Care over other options? - Any exterior automotive surfaces, materials and components will easily fade, age, and turn ugly from the effects of simple exposure to wet weather driving and ultraviolet rays from the sun. This, plus the time factor, that is the longer your car is exposed to moisture and UV rays from the sun, the more these materials and surface are going to fade, age and even crack over time.
Creating a product that rejuvenates, restores, and maintains these surfaces and materials, like plastic, vinyl, rubber, and metal surfaces (with matte finishes) is difficult because these types of materials and surfaces do not readily absorb most liquids deep into their structure. Most products merely sit on the surface and provide a temporary visual appearance improvement.
The chemists at 3D Products understand these materials and surfaces and purposefully created a formula that will penetrate and bond to provide true visual and physical improvements that hold up over time with repeated applications. When it comes to non-porous materials like plastic, nothing will last forever. Instead of false claims, or misleading information, we educate people on the root cause of the issue and the honest remedy. 3D Trim Care works great but, just like you need to wash your car regularly to keep it clean, you need to treat plastic, vinyl, rubber, and metal surfaces regularly to protect their physical structure and maintain their visual appearance. At least with 3D Trim Care, the stuff in the bottle really works.
- Restores a rich dark look to faded plastic, vinyl, rubber, and metal trim.
- Use on body trim and moldings, door handles, rear view mirrors, bumpers, body cladding, running boards, wiper arms, windshield cowling, etc.
- Powerful UV blocking polymers prevent fading, aging, and cracking.
- Non-greasy, dry to the touch. Fast, easy, wipe-on, wipe-off application.
- Water resistant, will not run off in wet weather or repeated washing.
- Fast drying, no-streak formula maintains the factory new look.
- Protects against further deterioration caused by sun, acid rain, chemical fallout, oxidation, ozone and high alkaline soaps and degreasers.
- Actively repels dirt, water, and other airborne contaminants.
- Works on all colors of exterior plastic trim including black, brown, and gray.
- 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
Directions
IMPORTANT: Always work on a cool clean surface in the shade. Always shake liquids well before and during use.
Step 1: Apply some 3D Trim Care directly onto clean foam, microfiber applicator pad or piece of cloth. Spread the 3D Trim Care over the surface to be treated and actively massage the product into the surface to whatever level is possible. Allow the product to penetrate for 45 seconds to a minute.
Step 2: Using a clean, microfiber utility towel, remove any excess 3D Trim Care and buff this treated area to a dry, rich satin sheen. Repeat this process to the rest of any plastic, vinyl, rubber trim, moldings, splash guards, or components on the rest of the vehicle.
For severely neglected surfaces
Initial application: Apply ample 3D Trim Care and allow to penetrate for up to 10 minutes then remove.
Secondary application: Repeat using a heavy application and allow to penetrate up to 5 minutes or until color or darkness is restored and desired appearance is achieved.
NOTE: 3D Trim Care can also be used on matte black paint commonly used on metal wiper arms.
IMPORTANT: If you get any 3D Trim Care on glass, wipe-off immediately. If needed, use some 3D Glass Cleaner to make removal easier and more complete.
Cleaning glass is everyone’s least favorite job because glass and mirrors reflect any streaks, smears, or haze right back at your eyes. The secret to getting glass crystal-clear and streak-free starts with the chemistry inside the bottle, not the marketing fluff on the outside label. This is where 3D Glass Cleaner is superior to the competition. The chemists at 3D created 3D Glass Cleaner using all-natural ingredients which are ethanol-produced from farm-grown corn through industrial fermentation. 3D Glass Cleaner not only excels at cleaning any glass crystal clear, it’s also VOC compliant and biodegradable.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Glass and surface cleaner for glass, mirrors, chrome, stainless steel, and other smooth, non-porous surfaces.
What does it do? - Cleans the glass and other surfaces without leaving any residues, streaks, smears, or haze.
When do you use it? - Anytime you need to restore crystal clear, streak-free results to all automotive and household glass as well as other surfaces.
Why use 3D Glass Cleaner over other options? - There’s a lot of glass cleaners on the market. In fact, it’s one of the most populated categories for both automotive and home use. One reason you’ll find a plethora of these products on the market is because it’s inexpensive to make a simple glass cleaner but that doesn’t mean it’s a good glass cleaner.
What separates our glass cleaner from all the rest is the chemistry of the product inside the bottle. 3D Glass Cleaner is a wide-spectrum cleaner that uses our own proprietary chemistry to not only clean by dissolving both water-soluble contaminants, (dirt, dust, pollen) and water-insoluble contaminants, (oily substances) but to also help your glass towels absorb and trap these things off the glass and onto the towel.
Non-streak, no-haze formula leaves glass crystal clear.
Fast application – spray on, wipe-off.
Non-Ammonia - safe for all glass including tinted windows.
Removes oily smoker’s film and vinyl fog.
Anti-fog formula – helps reduce window fogging in moist cold or hot humid climates.
Alcohol-based glass cleaner dissolves oily fingerprints and pet smudges.
Great for household cleaning – glass windows, mirrors, light fixtures, tile, vases, blinds, shelves, desktops.
3D’s Green Earth Technology – Biodegradable - Prop 65 and V.O.C. compliant.
Product Details
Cleaning glass is everyone’s least favorite job because glass and mirrors reflect any streaks, smears, or haze right back at your eyes. The secret to getting glass crystal-clear and streak-free starts with the chemistry inside the bottle, not the marketing fluff on the outside label. This is where 3D Glass Cleaner is superior to the competition. The chemists at 3D created 3D Glass Cleaner using all-natural ingredients which are ethanol-produced from farm-grown corn through industrial fermentation. 3D Glass Cleaner not only excels at cleaning any glass crystal clear, it’s also VOC compliant and biodegradable.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Glass and surface cleaner for glass, mirrors, chrome, stainless steel, and other smooth, non-porous surfaces.
What does it do? - Cleans the glass and other surfaces without leaving any residues, streaks, smears, or haze.
When do you use it? - Anytime you need to restore crystal clear, streak-free results to all automotive and household glass as well as other surfaces.
Why use 3D Glass Cleaner over other options? - There’s a lot of glass cleaners on the market. In fact, it’s one of the most populated categories for both automotive and home use. One reason you’ll find a plethora of these products on the market is because it’s inexpensive to make a simple glass cleaner but that doesn’t mean it’s a good glass cleaner.
What separates our glass cleaner from all the rest is the chemistry of the product inside the bottle. 3D Glass Cleaner is a wide-spectrum cleaner that uses our own proprietary chemistry to not only clean by dissolving both water-soluble contaminants, (dirt, dust, pollen) and water-insoluble contaminants, (oily substances) but to also help your glass towels absorb and trap these things off the glass and onto the towel.
Non-streak, no-haze formula leaves glass crystal clear.
Fast application – spray on, wipe-off.
Non-Ammonia - safe for all glass including tinted windows.
Removes oily smoker’s film and vinyl fog.
Anti-fog formula – helps reduce window fogging in moist cold or hot humid climates.
Alcohol-based glass cleaner dissolves oily fingerprints and pet smudges.
Great for household cleaning – glass windows, mirrors, light fixtures, tile, vases, blinds, shelves, desktops.
3D’s Green Earth Technology – Biodegradable - Prop 65 and V.O.C. compliant.
3D Eraser Gel Water Spot Remover makes removing unsightly water spots and mineral deposits easy. Plus, this powerful but safe acidic thick gel formula is effective unlike most liquid water spot removers on the market.
3D Eraser Gel Water Spot Remover works by dissolving calcium and minerals that make-up the visual spots or chalky looking circles plus it dissolves the residual chemicals the form the bond between these chalky mineral spots and your cars paint, glass, metal, and plastic surfaces. Simply apply, allow to dwell and then wipe-off.
What is it? - A thick, liquid acidic gel.
What does it do? - Chemically dissolves and removes water spots and mineral deposits.
When do you use it? - Anytime you discover unsightly water spots and mineral deposits on your car’s exterior surfaces.
Why use 3D Eraser Water Spot Remover over other options? - Here at 3D, we are a manufacture, not a re-bottler. We have our own team of chemists to create our own formulas.
When you see the 3D name on the outside of the bottle means you know you can trust the formulas on the inside of the bottle.
The best way to wash any car is with a source of running water, like a traditional bucket wash where you have free-flowing water from a garden hose. The thing is, we don’t all have access to running water all the time and in some cases, a waterless wash is a better and even a greener solution.
A lot of people don’t know this, but 3D introduced the very first waterless wash in the car care industry. Our 3D Waterless Car Wash was introduced before most people even understood the concept. This is because here at 3D one of our foundational goals is to create environmentally friendly products. Together with our slogan, do more with less and detailing made simple, our chemists continually strive to create state-of-the-art formulas that meet and exceed these goals.
Because our corporate headquarters and U.S. manufacturing plant is in Santa Clarita, California, we understand how precious our water resources are and thus this inspired us to create the first waterless wash.
3D Foaming Waterless Car Wash takes our original product, 3D Waterless Wash to a higher and foamier level. This new version (of the original) gives you all the cleaning power you need PLUS when used with a pump-up foam sprayer or any spray bottle with a quality foaming spray head, the high-foaming formula will create a thick, rich layer of waterless car wash foam over any surface you need to clean.
The cleaning ingredients go right to work dissolving and emulsifying surface dirt and road grime. As these soils are penetrated, they are lifted outwards and suspended in the foam, which at its core are simply millions of tiny bubbles. These tiny bubbles hold the suspended dirt and grime away from the surface enabling you to wipe them off safely thus reducing the potential for any marring, swirls or scratches.
The thick, rich, creamy foam offers excellent lubrication between your microfiber towel and the surface being cleaned to cushion the wiping action while you remove the foam and all the dirt along with it. 3D Foaming Waterless Wash is the next best thing to a traditional hose and bucket car wash.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Waterless car wash formulated to create a foam as it’s sprayed from a bottle or pump-sprayer.
What does it do? - Cleans your car safely by lubricating the surface with a rich, thick layer of foamy waterless car wash.
When do you use it? - Anytime you want to clean your car and you don’t have access to running water or prefer to not use running water or other car wash options.
Why use 3D Foaming Waterless Car Wash over other options? - Here at 3D, we make our own products. We have our own Research & Development Laboratory staffed with our own in-house chemists who are top in their fields of expertise. We can create new and unique formulas and test them multiple times in a single day tweaking them as we go until we have a perfect product.
Other brands simply are NOT manufacturers and must rely on outside companies and thus are at the mercy of a middleman for both the quality and availability of any category of product. Most, if not all other product manufacturing farms don’t have the ability to create, test, get the feedback and make changes in a single day and in most cases, it requires MONTHS.
This is the leverage 3D has over all the competition and a valuable benefit to you when you buy from the real deal, the actual manufacturer of the product.
No matter what the category, if 3D creates a product – it’s guaranteed to dominate the competition on price and performance. You have our name on it.
Waterless washes are real time savers and the perfect answer for those times when you don’t have the option to wash your car any other way – 3D’s Foaming Waterless Wash is the ultimate option waterless wash option and after you use it just one time, you’ll know why this product is so popular among professional detailers and car enthusiasts around the world.
Non-spotting solvent formula. Safe on painted surfaces.
When you need to get any type of carpet, upholstery, fabric or cloth surface clean there’s no better, more thorough or efficient method than using an extractor. Extractors work quite simply – they inject a cleaning solution, (either hot or cold), into a cloth surface and then immediately extract the injected fluid back out bringing with it all the dirt, spills, stains and soiling.
That said, to make any brand of hot or cold-water extractor more efficient and powerful you want a great extractor shampoo. 3D Extractor Shampoo provides the chemical cleaning agents specifically formulated to target and remove all the most common types of dirt and grime anyone needs to clean and remove out of any cloth, fabric, carpet and/or upholstery.
It gets even better though – the chemists at 3D also created a powerful cleaning formula that not only cleans ferociously, but also deodorizes, restores the factory original brightness, leaves zero residues behind and will not leave carpet or other fabrics feeling crunchy or stiff.
Non-foaming formula is also important because as the cleaning fluid is extracted via a powerful vacuum – the turbulence created will not cause the cleaning fluid to turn to foam. The problem with foam in the dirty water recovery tank is that it can get sucked through the vacuum motor of your extractor damaging it or causing pre-mature failure. This is why you want a non-foaming product.
Most hot and cold-water extractors hold anywhere from 3 to 6 gallons of clean and dirty water in their holding tanks. With this concentrated formula, 1-gallon will make up to 32 gallons of extractor fluid at 4 ounces per 5 gallons of water. Or 1-gallon will make up to 16 gallons of extractor fluid at 8 ounces per 5 gallons of water. Not only is this a top performing product it’s also a great value for your money.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Non-foaming cleaning solution for use in hot and cold-water extractors to multiply the cleaning ability and effectiveness of the extractor.
What does it do? - After the cleaning fluid is injected into carpet, cloth, fabric or upholstery, it breaks down dirt, grime, stains and all types of soiling so that it can then be removed via the vacuum extraction aspect of an extractor. At the same time, it deodorizes to remove any foul scents or smells and restores a brighter, factory new appearance.
When do you use it? - Anytime you want to deep clean and deodorizes cloth, fabric, carpet and upholstery in one step.
Why use 3D Extractor Shampoo over other options? - The chemists at 3D are chemical engineers by trade and they are the best in the industry. It’s their passion to always create the best performing products in any category 3D chooses to provide solutions for our customers. We don’t just want to compete in the extractor shampoo category we want to dominate it. Time is money and cleaning carpets, and upholstery is not only time-consuming but it’s also a lot of hard work. We think just like you and that is – if we’re going to invest the time and energy to do a job, we want to do it right the first time. This is why you can trust 3D Extractor Shampoo to be the best in its category because just like you, we only want to do the job once and we want pro results the first time.
Low foam formula specifically created for cold and hot water extractors.
Removes dirt, heavy soiling, grease, grime, foot traffic, food, coffee, soda and pet stains.
Cleans and deodorizes cloth, fabric, carpet and upholstery in one step.
Optical brighteners restore factory-new appearance – won’t fade or discolor.
Zero residues – extracts completely leaving fibers clean and non-sticky.
Save money – use in automotive, home, office, shop & marine environments.
Concentrated formula dilutes at 4 to 8 ounces per 5 gallons of water depending on strength desired.
3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
Product Details
When you need to get any type of carpet, upholstery, fabric or cloth surface clean there’s no better, more thorough or efficient method than using an extractor. Extractors work quite simply – they inject a cleaning solution, (either hot or cold), into a cloth surface and then immediately extract the injected fluid back out bringing with it all the dirt, spills, stains and soiling.
That said, to make any brand of hot or cold-water extractor more efficient and powerful you want a great extractor shampoo. 3D Extractor Shampoo provides the chemical cleaning agents specifically formulated to target and remove all the most common types of dirt and grime anyone needs to clean and remove out of any cloth, fabric, carpet and/or upholstery.
It gets even better though – the chemists at 3D also created a powerful cleaning formula that not only cleans ferociously, but also deodorizes, restores the factory original brightness, leaves zero residues behind and will not leave carpet or other fabrics feeling crunchy or stiff.
Non-foaming formula is also important because as the cleaning fluid is extracted via a powerful vacuum – the turbulence created will not cause the cleaning fluid to turn to foam. The problem with foam in the dirty water recovery tank is that it can get sucked through the vacuum motor of your extractor damaging it or causing pre-mature failure. This is why you want a non-foaming product.
Most hot and cold-water extractors hold anywhere from 3 to 6 gallons of clean and dirty water in their holding tanks. With this concentrated formula, 1-gallon will make up to 32 gallons of extractor fluid at 4 ounces per 5 gallons of water. Or 1-gallon will make up to 16 gallons of extractor fluid at 8 ounces per 5 gallons of water. Not only is this a top performing product it’s also a great value for your money.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
What is it? - Non-foaming cleaning solution for use in hot and cold-water extractors to multiply the cleaning ability and effectiveness of the extractor.
What does it do? - After the cleaning fluid is injected into carpet, cloth, fabric or upholstery, it breaks down dirt, grime, stains and all types of soiling so that it can then be removed via the vacuum extraction aspect of an extractor. At the same time, it deodorizes to remove any foul scents or smells and restores a brighter, factory new appearance.
When do you use it? - Anytime you want to deep clean and deodorizes cloth, fabric, carpet and upholstery in one step.
Why use 3D Extractor Shampoo over other options? - The chemists at 3D are chemical engineers by trade and they are the best in the industry. It’s their passion to always create the best performing products in any category 3D chooses to provide solutions for our customers. We don’t just want to compete in the extractor shampoo category we want to dominate it. Time is money and cleaning carpets, and upholstery is not only time-consuming but it’s also a lot of hard work. We think just like you and that is – if we’re going to invest the time and energy to do a job, we want to do it right the first time. This is why you can trust 3D Extractor Shampoo to be the best in its category because just like you, we only want to do the job once and we want pro results the first time.
Low foam formula specifically created for cold and hot water extractors.
Removes dirt, heavy soiling, grease, grime, foot traffic, food, coffee, soda and pet stains.
Cleans and deodorizes cloth, fabric, carpet and upholstery in one step.
Optical brighteners restore factory-new appearance – won’t fade or discolor.
Zero residues – extracts completely leaving fibers clean and non-sticky.
Save money – use in automotive, home, office, shop & marine environments.
Concentrated formula dilutes at 4 to 8 ounces per 5 gallons of water depending on strength desired.
3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
The 3D SSX Salt Stain Remover stands as the ultimate defense against winter's most persistent enemy - road salt damage. This specialized cleaner is formulated with advanced chemical technology that specifically targets and dissolves calcium and salt deposits that regular cleaners can't touch. Whether you're dealing with fresh salt stains or season-old residue, this powerful solution restores your car's interior to its original condition.
Its unique chemistry works by breaking down salt crystals at a molecular level, making them easy to extract from carpet and upholstery fibers. Unlike conventional cleaners, SSX doesn't just mask the problem - it completely eliminates salt residue while protecting your vehicle's interior surfaces from future damage.
The non-aggressive formula ensures safe application on all automotive fabrics and upholstery, making it perfect for both professional detailers and DIY enthusiasts. Each gallon is concentrated for maximum value, allowing multiple applications throughout the winter season.

