Maximize leveling of orange peel or surface texture!

The 3D Interface Pads are designed specifically for the 3D ACA Flex Sanding Discs.  The 3D interface pad offers the perfect balance of medium density foam rubber to smooth out the oscillating action while maintaining a flat surface to efficiently sand only the high point until they are level with the low points on the surface.

The hooks used for the sanding disc side are flat-style micro-hooks.  They offer excellent attachment strength while virtually eliminating any horizontal torsional movement between the sanding disc and the interface pad.  The flat-style micro-hooks keeps the face of the sanding disc damn near flat against the surface.  This means there's simply no "wiggle" between the interface pad and the sanding disc, which transfers the oscillating action of the sander to the surface of the paint without variation.  The results are a dramatically flatter sanding action to keep the sanding where you want it – on the high points on the surface.

Non-3D interface pads will decrease sanding disc performance and increase the risk for pigtails.

Thick or soft foam interface pads or using the wrong style hook like conventional long J-hooks style, cause the sanding disc to abrade the high points and the low points at the same time so you’re never truly leveling the high points but instead sanding down or taking down the entire surface equally.  This wastes perfectly good paint and also wastes time.

The 3D interface pad enables the face of the sanding disc to abrade only the highest points so you can remove only the orange peel while leaving more of the lower-level paint on the surface.

Don’t get caught in the misconception that all hook-n-loop styles are the same – they are not.  The 3D Flex Sanding Discs are tuned and optimized for the 3D Interface pad.  The last place you want to skimp or cut corners is when sanding the paint on your own car or a customer car.

What is it?

Semi-flexible foam interface pad with flat micro hooks on other sanding disc side for more precise cutting action.  Uses Alpha Ceramic Alumina for abrasive technology, abrasive grains are uniform in size and placement over the face of the disc with a controlled cutting and breakdown rate.  Anti-clogging technology helps surface to avoid cementing of the paint dust to surface of disc.

What does it do?

Maintains a flat surface between the face of the sanding disc and the paint surface when sanding flat and curved body panels.  Reduces the risk for pig tails.

When do you use it?

Anytime you want to remove orange peel or other surface texture to create a more perfect finish.

Why use 3D Interface Pads over other options?

3D sanding discs are thin, so they keep the leveling focus on the high points of orange peel for maximum leveling efficiency.  The Alpha Ceramic Alumina abrasive technology are engineered abrasives that are uniform in size, shape, hardness, cutting, and breakdown for smooth, long-lasting cutting on any dual action sander.  The uniform size and placement mean a more uniform and shallow sanding mark pattern that buffs out fast while leaving more paint on the car.

3D’s wool cutting pads with rotary polishers are the fastest and most efficient pad and tool combo for removing sanding marks, deep swirls, scratches, oxidation, and water spots. The fibers of wool cutting pads are forms of abrasives. These fiber abrasives offer their own dedicated cutting ability. Together with the abrasives in your choice of 3D compound, you now have to types of abrasives cutting for you and this is powerful. 

The rotary polisher, because it’s single direction, direct driver or gear-driven tool means zero pad stalling. So the fastest and most time-efficient way to remove sanding marks or other serious and deep paint defects is with a 3D wool pad, a 3D compound, and a rotary polisher.

What is it?
High performance lambswool cutting pad for use with rotary polishers.

What does it do?
When used with 3D compounds and polishes, the 3D lambswool cutting pad removes sanding marks and other deep paint defects like, swirls, scratches, water spots and oxidation.

When do you use it?
Typically lambswool cutting pads are used as the first paint correction step after sanding. They are also the first step in a multiple-step paint correction process to remove or level deep swirls, scratches, water spots and oxidation. Any wool pad step should always be followed with a foam pad step to ensure there are no holograms left behind from the fibers of the wool pad.

Why use 3D’s White Lambswool Cutting Pads over other options?
The 3D white lambswool cutting pad is a premium cutting pad. We only use the finest lambswool from sheep sheered in Australia. The sheered lambswool undergoes multiple processes step to create the perfect all-natural lambswool cutting pad.

Because of our proprietary treating process, our lambswool pad will also outlast all other wool cutting pads. And because of the uniform pile resulting from the complex treatment process, our lambswool pads will leave a more shallow hologram pattern than other wool pads.

Plus because of the proprietary treatment process, our pads are non-linting and don’t shed like conventional traditional wool pads, so they are cleaner for your shop and the process.

3D Car Care's Graphene Ceramic Coating is the ultimate tool for maintaining the pristine condition of your vehicle's paint. This premium graphene ceramic coating is crafted to provide not just superior protection but also a noticeable enhancement in your car's overall appearance.

The formula is infused with graphene, a renowned material known for its strength and durability. This integration helps the coating to form a robust barrier against various damaging factors such as UV rays, rain, dirt, and more. The graphene component not only fortifies the coating but also ensures it lasts longer, offering up to three years of reliable protection.

One of the standout features of this product is its oleophobic and hydrophobic properties. These characteristics ensure that both water and oil-based stains are less likely to adhere to the surface of your car, making it easier to keep clean and maintain its shine. The water beading effect provided by this coating is exceptional at protecting against moisture.

Ease of application is another significant benefit. Whether you are a professional detailer or a DIY enthusiast, you will appreciate the straightforward application process that allows for a smooth, even layer without the fuss. The end result is a slick, glossy finish that enhances the depth and vibrancy of your vehicle’s color.

Choose 3D Car Care Graphene Ceramic Coating for a top-tier protective solution that extends the life of your car’s aesthetic appeal while simplifying maintenance. This product is a smart investment in the care and upkeep of your vehicle, ensuring it looks stunning while being shielded from everyday wear and tear. The kit comes with 30ml of graphene ceramic coating, a foam block and a suede patch.

Overview

• ONE EASY STEP … 3D Upholstery & Carpet Shampoo cleans and deodorizes carpet, upholstery and more with one simple step!
• HIGH FOAM … Our premium high foaming formula is tough on spots and stains, providing the ultimate deep clean!
• ORIGINAL BEAUTY … The optical brighteners work to bring back the original beauty and texture from the surface for a 'like new' look and feel!
• FRESH LEMON SCENT … Leave your carpet and upholstery clean, beautiful, and full of our refreshing lemon scent!
• PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a carpet and upholstery cleaner that's tried and trusted.

Description

The science behind why you want a high foaming upholstery and carpet shampoo

One of the reasons everyone enjoys buying a brand-new car is because it’s new, meaning the outside is clean and shiny and even more noticeable - the inside is so clean and sterile. No one else has soiled the seats, the arm rests, the steering wheel, the center console, or the carpets. Part of the reason the inside of a brand-new car feels luxurious is because it’s so fresh and clean. It’s a universal phenomenon that people from all walks of life, describe a new car as having that new car smell. And this is because – everything is still spic-and-span clean, kind of like an operating room in a hospital – everything looks and smells surgically clean. 

It’s this clean factor, this overpowering perception that the inside of a new car is 100% completely clean and germ-free that makes getting into a new car so inviting, so welcoming. You want to get inside of a brand-new car because you know it’s so clean.

Sad news is, we can’t all simply go down to the dealership and buy a new car just because the inside of our current car loses that new car smell and starts to show signs of normal, day-in, day-out wear-n-tear.

What we can do is clean it. And the parts or areas of a car that get the dirtiest are any part or area that is made from some type of fabric, upholstery, or carpeting. Cleaning fabric, upholstery or carpeting is challenging because unlike smooth hard surfaces, where the dirt and grime is sitting on the surface and easy to wipe-off, with fabric, upholstery or carpeting, the dirt and grime can be both on the material and in the material. 

Another difficult aspect of cleaning fabric, upholstery or carpeting is once any liquids penetrate past the outer surface, or get behind or under the surface of the material being cleaned – how do you then remove any excess moisture? You need to remove any liquids or moisture, or this can lead to the formation of mold and mildew where you cannot see it or reach it to clean it.

This is why we made 3D’s Upholstery & Carpet Shampoo to be a high foaming cleaner. Foam is basically suds or bubbles. Bubbles are the product (a liquid) enveloped around pockets of air and it is these foam bubbles that sit on TOP of the surface where you want them so you can work them against the surface of the material and then wipe-off the residues.

This simple foam structure of the cleaner helps you to effectively clean the material while avoiding getting too much liquid into whatever is behind the surface of the fabric, upholstery, or carpeting.

In the case of cloth seats, there is foam cushioning under the top layer of fabric. Foam absorbs liquids. If you put a straight liquid cleaner on to the surface of a cloth-covered foam seat, a lot of the liquid will saturate past the cloth surface and go into the foam. Now the problem becomes, how can you get this liquid it out? Unremoved liquids are what can lead to mold and mildew issues inside your car’s seats. This same principal applies to carpets and even cloth-covered door panels, arm rests or center consoles.

When it comes to cleaning any type of fabric by hand – you want a high foaming cleaner so the cleaner will sit on the top surface. And that’s the science behind 3D’s high foaming Upholstery & Carpet Cleaner.

Besides the high foaming feature, 3D’s Upholstery & Carpet Cleaner uses 3D’s green technology to create a wide-spectrum cleaner that can tackle just about any dirt, grime, or stain that’s common to car interiors. This wide-spectrum cleaner also includes a proprietary bacterial enzyme, which completely eliminates foul odors, not just mask them over cover them up. 

And to really add some zing to the clean, we included what are known in chemistry jargon optical brighteners. These optical brighteners working with the cleaners, restore a crisp, richness-of-color to the pigments and dyes used to give your car it’s unique color scheme. 

And 3D’s chemists didn’t stop there, they also made sure this product leaves a residue-free surface to avoid future dirt build-up. 

If you want your car’s interior to look, feel and smell like a brand-new car, use 3D’s Upholstery & Carpet Cleaner to hand-clean any cloth, fabric, carpet, or upholstery. You can even use it to wipe down hard, non-absorbing surfaces like vinyl and modern coated leather.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - Foaming upholstery, fabric, and carpet cleaner

What does it do? - Cleans carpet, fabrics, and upholstery by removing ground-in dirt, grime, food stains, liquid spills, pet stains, cosmetic stains, skin lotions stains and body oils.

When do you use it? - After first thoroughly vacuuming and removing any loose dirt and debris out of weave of fabrics, carpeting and textiles.

Why use 3D Upholstery & Carpet Shampoo over other options? - This high foaming carpet and upholstery cleaner keeps the cleaning foam on the surface where you want it, not simply soaking and saturating into and under the surface where you don’t want it. Powerful cleaning agents, optical brighteners, and bacterial enzyme odor eliminators clean while restoring a factory new bright appearance with a residue-free, fresh lemon scent.

Diluting 3D Upholstery & Carpet Cleaner

3D’s Upholstery & Carpet Cleaner is sold as a concentrate. Before using this product, you must dilute it. The dilution ratio for general cleaning is a ratio of 1:16 – or 1 part concentrate to 16 parts water. The number 16 in the expressed ratio is the ratio number.

Dilution Formula

When using U.S. Standard ounces as our unit of measure, a dilution formula is expressed like this, Final volume divided by ratio number = ounces to add to final volume container.

Dilution for a 32-ounce spray bottle

To figure out a dilution level to make a 32-ounce bottle of ready-to-use product, here’s the formula. 32 divided by ratio number = number of ounces to add to 32-ounce bottle. To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 32 divided by 16 = 2 ounces per 32-ounce bottle.

Dilution for a 1-gallon jug

Using the same above formula, only substituting 128 ounces for 32 ounces but still using 16 as the ratio number, the dilution equation would look like this, 1-gallon = 128 ounces. 128 divided by ratio number = ounces per gallon.

To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 128 divided by 16 = 8 ounces per gallon.

In simple terms, using a clean, 1-gallon mixing container, you add 8 ounces of upholstery & carpet cleaner concentrate and then fill the rest of the container with clean water and mix thoroughly. This will make 1-gallon of ready-to-use upholstery & carpet cleaner at a 1:16 dilution ratio.

Next you will want to pour this mixture into a clean spray bottle. To create a thick foam, you’ll also want a foaming spray head. A normal spray head will not work as well as a foaming spray head.

• High foaming formula stays on top of surface – less saturation under surface.
• 3D’s proprietary bacterial enzymes completely eliminate foul odors. 
• Optical brighteners restore and enhance original colors.
• Cleans and removes dirt, grime, drink spills, food stains, body oils, pet stains, etc.
• Safe for all fabrics, upholstery, and carpets – even vinyl and coated leather.
• Concentrated formula – One 16-ounce bottle makes 2 gallons of RTU product
• Customer pleasing, fresh lemon scent leaves zero residues behind.
• Hypo allergenic – won’t cause allergic reactions – formulated for use by hand.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

Directions

IMPORTANT: Always work on a cool surface in the shade.

Professional Technique Tip – Dry Extraction - Always start by vacuuming any upholstery or carpet to be cleaned. This is called dry extraction. The idea is to remove as much of any loose dirt possible by lifting it out of or off of the surface. By removing dry, loose dirt first – you don’t risk liquefying this dirt with your spray liquid cleaner and then having to remove it. It’s easier, faster, and more effective to remove loose dirt via air extraction or even via blowing out the fabric, carpet, or upholstery with compressed air than it is to remove it once it’s wet.

Step 1: After vacuuming, spray 3D Upholstery & Carpet Cleaner directly onto surface to be cleaned and immediately scrub the surface with a horsehair or textile brush. 

Step 2: Use a clean, absorbent cotton terrycloth towel or absorbent microfiber towel and wipe and blot the cleaner and any emulsified dirt off of and/or out of the surface. Repeat this step switching to a fresh, dry towel often to absorb and remove as much residue as possible.

Step 3: Re-vacuum surface to lift out any remaining residues and then give the surface a final wipe with a dry towel.

Step 4: After all interior surfaces have been cleaned, wiped and/or blotted dry, place an air mover, or fan inside car and turn to the highest setting. Roll windows down about 1 inch so the air mover or fan can circulate air in and out of the car to evaporate and remove any remaining moisture. Run fan for at least one hour in normal ambient temperatures and humidity. Longer for colder, moist climates.

3D makes getting rid of foul odour's, unpleasant scents, unwanted smells and horrible stenches quick, fast and easy with their spray-on odour eliminator – 3D Odour X. Unlike most products in the odour removing category which don’t actually remove the molecules that are the root-cause of the offending odour's, 3D Odour X – seeks out and breaks-down the individual molecules and this permanently eliminates the root cause.

One of the most difficult things to do is remove unwanted foul odours out of the inside of a vehicle. In most cases, the odors, which are molecules from some form of substance, permeate into porous surfaces like cloth seats, cloth headliners, cloth door panels and fabric carpets. Unlike a hard surface, which you can simply WIPE the surface and remove the contaminants – with cloth and fabric – the odour causing molecules are behind the surface and inside the cloth covered component.

Simply spray 3D Odour X over the area causing the odour's and let the bacterial enzymes go to work. For really severe situations – you may need to spray and massage the product into the cloth covered item and repeat as needed, but for most day-to-day odors a simple spray will take the smell away.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

Why use 3D Odour X over other options? - The reason most products for getting rid of odour's on the market are simply scents that mask the odour is because the chemistry required to correctly embody the bacterial enzyme in a stable carrying agent that at the same time does not kill the bacterial enzyme is difficult and costly. It also requires a high degree of expertise. 

3D Car Care Waterless Car Wash is designed for those who value both their time and the environment. It offers a fast, waterless method to clean your vehicle, making it perfect for people who live in water-restricted areas, or simply don't have access to a water source.

The 3D Waterless Car Wash stands out with its advanced formula that ensures a scratch-free clean. This means you can maintain your car’s shine without the worry of damaging its paint. The formula is tough on dirt and grime but gentle on surfaces, ensuring your car looks immaculate with minimal effort.

Using this waterless wash is incredibly simple. Spray the cleaner directly onto the surface of your car, use a microfiber towel to wipe away the dirt, and buff lightly for a glossy finish. This quick three-step process not only saves time but also conserves gallons of water, making it a smart choice for the environmentally conscious.

Moreover, the 3D Waterless Car Wash is infused with a delightful green apple scent, adding a touch of freshness to your car cleaning routine. It’s not just about functionality; your cleaning experience becomes more enjoyable with this pleasantly scented formula.

Experience the transformative power of the 3D GLW Series SiO2 Ceramic Trim Restore, a product engineered to breathe new life into your vehicle's plastic trim. Over time, plastic trim can lose its luster, succumbing to the wear and tear of the elements, leaving it dull and faded. This remarkable formula steps in as your trusted companion in the battle against such deterioration. As you apply it, you're not merely restoring; you're rejuvenating. The SiO2 Ceramic technology works its magic, reinvigorating plastic surfaces and imparting an ultra-dark, showroom-worthy finish.

Yet, this product doesn't stop at aesthetics. It's not just about appearance; it's about protection. The 3D GLW Series SiO2 Ceramic Trim Restore also adds a layer of hydrophobic protection, ensuring that your trim remains shielded from the elements. Water and contaminants will bead up and roll off, leaving your plastic trim not only looking revitalized but also safeguarded against continued elemental damage. Additionally, it introduces a crucial layer of UV protection, shielding your trim from the relentless sun's rays that can cause fading and deterioration. It's a comprehensive solution that goes beyond restoration, offering a new lease of life and lasting defense to your vehicle's plastic trim.

HYPER LUSTER Experience the pinnacle of car care with our GLW series Ceramic Trim Restore. Revive faded and weathered trim, plastic molding, and bumpers to their original ultra-deep dark finish.

ULTIMATE HYDROPHOBIC PROTECTION Your trim takes a beating from harmful UV rays, elements, cracking, and contaminants. The hydrophobic properties and UV protection in our SiO2 Ceramic Trim Restore provide a durable barrier of hydrophobic protection.

NON-GREASY GLW Series SiO2 Ceramic Trim Restore’s dry-to-the-touch formula is easy to apply and gets deep into the surface to bring the black trim colour back to life! With the GLW series, you can achieve like-new results without the mess.

ULTRA EFFECTIVE TRIM REVIVAL Simple apply with applicator pad or microfibre towel to revive your dull and oxidised trim to reveal an ultra-protected deep dark finish. 

3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.

Step into the future of car care with the 3D GLW Series SiO2 Ceramic Wax, a game-changing product designed to redefine your car's appearance and protection. This wax offers more than just a shine; it provides an effortless and ultra-slick application, instantly transforming your vehicle into a hyper-glossy masterpiece. As you wipe it on and wipe it off, you're not just creating a visual spectacle; you're also adding a robust layer of SIO2 Ceramic protection. This is no ordinary wax; it's a barrier against the elements. Rain, water spots, dirt, and road grime will all find themselves repelled by the sheer hydrophobic power of this advanced formula.

But the benefits don't stop at aesthetics and protection. The 3D GLW Series SiO2 Ceramic Wax goes further, sealing your car's clear coat against the relentless assault of contaminants. It's a comprehensive solution that ensures your vehicle not only looks its best but also remains resilient in the face of daily challenges. The result is a car that boasts an enduring shine and protection, a testament to your dedication to its care and longevity. With this product, you're not just waxing; you're safeguarding your car's brilliance and clear coat for the long haul.

ULTRA-SLICK GLOSS FINISH High gloss GLW Series SiO2 Ceramic Wax makes your paint vibrant as ever. Now anyone can achieve maximum glow with 3D’s GLW Series wax.

PEAK HYDROPHOBIC PROTECTION Advanced formula contains ceramic Silicon Dioxide (SiO2) technology that seals your car’s paint with a perfect layer of hyper hydrophobic protection against water spots, brake dust, road grime, and other contaminants for a long period of time.

HYPER EFFECTIVE GLOSS Simply apply with applicator and wipe off with a microfibre towel to reveal the ultimate glow. No need for rubbing, buffing, or mess like with conventional wax.

NEXT-LEVEL GLOW Whether you’re a seasoned or beginner at-home detailing enthusiast, GLW Ceramic Wax makes it easy to enhance the appearance of your vehicle.

3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.

Makes the hard jobs easy!

The fastest and easiest way to clean any glass window or mirrors is using a great glass cleaner that offers excellent clinging power on vertical surfaces. 

What is it?

Glass and surface cleaner for glass, mirrors, chrome, stainless steel, and other smooth, non-porous surfaces.

What does it do?

Cleans the glass and other surfaces without leaving any residues, streaks, smears, or haze.

When do you use it?

Anytime you need to restore crystal clear, streak-free results to all automotive and household glass as well as other surfaces.

Why use 3D Aerosol Glass Cleaner over other options?

There’s a lot of glass cleaners on the market.  In fact, it’s one of the most populated categories for both automotive and home use.  One reason you’ll find a plethora of these products on the market is because it’s inexpensive to make a simple glass cleaner but that doesn’t mean it’s a good glass cleaner.

What separates our glass cleaner from all the rest is the chemistry of the formula inside the can.  3D Aerosol Glass Cleaner is a wide-spectrum cleaner to not only clean by dissolving both water-soluble contaminants, (dirt, dust, pollen) and water-insoluble contaminants, (oily substances) but to also help your glass towels absorb and trap these things off the glass and onto the towel. 

Best of all – the aerosol delivery system creates thick, rich foam for enhanced cleaning strength, superior vertical surface clinging ability and extended dwell time.

Transform your vehicle's appearance with 3D Ultra Protectant tyre shine spray. This premium tyre protectant combines cutting-edge water-based technology with superior UV protection to deliver a brilliant, long-lasting shine that protects your tyres from environmental damage.

Unlike traditional oil-based dressings that leave behind greasy residues and attract dirt, 3D Ultra Protectant provides a clean, professional finish that truly lasts. The water-based formula penetrates deep into the rubber, creating a protective barrier that resists washing away during wet weather conditions and regular vehicle maintenance.

The sophisticated formulation offers exceptional versatility, making it perfect for not only tyres but all exterior rubber and vinyl surfaces. Its quick-drying properties ensure a streak-free, professional-grade finish that won't sling onto your vehicle's paint during driving.

• Safe and effective cleaner for all surfaces
• Quickly clean car interior - door panels, dashboards, cup holders, and more
• Easy spray and wipe formula cleans surface with minimal effort
• Clean all your surfaces with confidence and peace of mind

Everyone needs a great APC or All-Purpose-Cleaner.  Why? Because there’s always something that needs cleaning! The thing is, you really only want great APC, not a me-too product. The market is absolutely flooded with All-Purpose-Cleaners. The problem is most these products are simply made from inexpensive ingredients or crude chemistry. They don’t work well, they don’t smell good, and they really only work on the kinds of things simple soap and water would clean.

3D All-Purpose-Cleaner is the best APC on the market today. It’s the best because it uses the most costly ingredients and the chemistry is not only top-notch, but also created to be safe for you, whatever you’re using it on and the environment. Here at 3D – EVERY product we make is based upon our Green Technology. 3D’s Green Technology is our pledge to only create products that meet our stringent criteria, which includes safe for you, safe for the environment and just as important – all our products must be best-in-category. When we decide to launch a product in any category, be it a spray detailer or a ceramic coating or in this example, an all-purpose-cleaner, it has to dominate the competition.

When you’re ready to buy your next all-purpose-cleaner, put 3D All Purpose Cleaner in your Shopping Cart. We promise, you’re going to love this product. We guarantee it. 3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - A spray-on liquid that cleans virtually any surface or material.

What does it do? - Cleans, dissolves, emulsifies all types of organic, inorganic, stains as well as biological stains. Removes biological odors permanently.

When do you use it? - Anytime you need to remove any type of stain on a surface or in a material.

Why use 3D All Purpose Cleaner over other options? - Great question? Especially when these types of products are relatively cheap and be found in just about any kind of store. Here’s our answer: The reason you should choose 3D All-Purpose-Cleaner over other options because it works better, it works faster, and it’s formulated to do these two things while still being very safe to the surface it’s used on and also safe for you and our environment. Yes, it’s this good.

• All purpose cleaner that’s safe for virtually all surfaces.
• Cleans leather, vinyl, rubber, plastic, cloth seats and door panels.
• Contains an enzyme that removes biological and organic stains while permanently removing odors.
• Works on inorganic stains like make-up, lipstick, motor oil, grease, and tar.
• Ready to use straight from the bottle or can be diluted to best fit the job.
• Use inside or outside car. Works great in trunk and engine compartment.
• Green technology, Earth friendly, biodegradable, Prop 65 and V.O.C. compliant.

• Spray on Ceramic Coating
• Quickest way to ceramic coat your vehicle
• Durable SiO2 super hydrophobic formula
• Glossy shine and up to 1 year protection

Ceramic coatings are the real deal when it comes to true, long lasting paint protection with a high gloss finish that looks like your car was just painted. 3D Ceramic Touch is the fastest and easiest way to get real ceramic protection in an easy and fast spray-on application method anyone can do.

The normal ceramic coating process takes hours and when performed by a professional detailer will cost hundreds and even thousands of dollars. Now you can do it yourself and save tons of money. How much prep work or paint correction you do is up to you because 3D Ceramic Touch can be used on just about any hard, smooth surface as long as it’s clean.

Besides long-lasting protection, the nano-sized particles of silicone dioxide impart a super high gloss finish that looks glassy, like the kiln-fired glaze you see on pottery, and it’s incredibly durable too!

If you want the fastest, easiest way to get something you own protected with a ceramic coating then 3D Ceramic Touch is the best option. Quick, fast and easy with a true, layer of ceramic protection.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - True spray-on, wipe-off nano ceramic coating.

What does it do? - Forms a semi-permanent bond to hard, smooth, clean non-porous surfaces to provide long lasting, exceptional protection from the elements and anything that would attack the surface.

When do you use it? - After first washing and drying your vehicle, and if needed, claying the surface to remove any above surface bonded contaminants like overspray or industrial fallout. Once the surface clean and smooth you can then apply 3D Ceramic Touch, even over swirls and scratches. 

If you’re the kind of person that wants a more perfect looking finish, then after claying, perform any paint correction steps like machine compounding or machine polishing first with 3D ONE – followed by using 3D Wipe to prep the paint for the coating.

Why use 3D Ceramic Touch over other options? - This is a great question and I’m glad you asked it. The marketing side of the car care products business is for the most part completely un-regulated. Sure, products must have important safety precautions on the label in case of accidents but when it comes to the marketing claims or hype – anything goes. And how are you, the trusting consumer, supposed to know real products from fake products? That’s tough.

The product name is 3D Ceramic Touch – and this is a true or real ceramic-based product. It’s not some kind of amino functional silicone product advertised as “ceramic” – NO WAY. This is the real deal. 

The way you can test for your self is to spray or pour ANY products sold as a “ceramic” paint protection product onto a surface and then wait for 24 to 48 hours. Check to see if it dries to a SOLID residue that is dry and non-smeary to the touch. If it completely dries and hardens – it’s a true ceramic. If it doesn’t – it’s fake. 

Fake products can and will bead water really well and give the illusion of a ceramic coating – but they’re still fake, they are not the real-deal. Or worse, the chemist that is making the product and calling it a ceramic is not fully up to speed with their craft.

All 3D ceramic products, when applied to a surface will fully dry, cure and harden. This is how a non-chemist can test our products or any products sold as a “ceramic” protectants or sealers of some sort.

If you want an honest product that is what it claims to be – trust in the 3D brand name. We don’t make junk and we certainly don’t lie about what are products are or what they are made out of.

• Advanced SiO2 Super Hydrophobic Ceramic Spray Coating.
• Fast application - spray-on, wipe-off - Only 30 second flash time!
• Professional grade protection – cars, trucks, SUVs, RVs, motorcycles & boats.
• Creates a slick, glassy, high shine super hydrophobic surface.
• SiO2 super hydrophobic surface means self-cleaning effect anytime it rains. 
• Normal washing and drying is faster, easier and safer too!
• Easy to use ceramic coating – perfect for beginners and pros alike.
• Cost a fraction of what a pro detailer would charge to install a ceramic coating.
• Forms a semi-permanent bond to paint for up to 1-year protection.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

Revive your vehicle's trim with Instant Shine, a quick aerosol spray trim restore that brings back its original luster in an instant. This powerful formula not only restores trim but also rejuvenates plastics, vinyl, and rubber surfaces, giving them a like-new appearance. With Instant Shine, you can enjoy long-lasting shine and protection that enhances the overall look of your vehicle without the greasy residue.

Experience the convenience of a dry-to-the-touch finish as Instant Shine effortlessly revitalizes your car's exterior. Its non-greasy formula ensures a clean, crisp appearance, making it ideal for regular maintenance. Say goodbye to dull surfaces and hello to a refreshed look with Instant Shine, the ultimate solution for keeping your vehicle looking its best.

Hi Tech Industries Detailing Brush 

Available in sizes 3", 5" & 6"

The most concentrated high-quality car wash soap on the market!

3D Super Soap is a super concentrated version of 3D Pink Car Soap only we’ve removed the water. The formula retains a uniform composition throughout the entire matrix of solution. 

AND – this uniform homogeneous solution re-mixes easily and uniformly with water to create the correctly diluted finished product. 

The break-through in chemistry is not just removing the water – heck any chemist worth his weight in salt can do this – the hard part is keeping the various ingredients suspended in a uniform solution over time AND then being able to be re-mixed with water to re-create the original product also in a uniform stable solution.

With this proprietary process 3D is able to remove the water and thus reduce the shipping costs of the Nano products while also reducing the container size and thus our ecological footprint.  And all our plastic containers are recyclable.

What is it?

High efficiency hyper-concentrated pH balanced car wash soap.

What does it do?

Removes dirt, road film and surface contamination to maintain a vehicle’s appearance and/or prep a car for paint correction.

When do you use it?

Anytime you need to get a car clean.

Why use 3D Super Soap over other options?

When it comes to investing in car care products whether detailing for fun or profit it’s vital you do your own research and get the best value for your hard-earned dollars.  Research is time-consuming and the information available can often times be confusing.  

Here at 3D we are a manufacturing company first and marking comes into play as a necessary function for staying business.  Our commitment to you as a customer, be you a single person or a large operation is to manufacture and supply professional grade products.  We know our success relies on repeat customers coming back for more because they are satisfied with the performance they get from 3D Products. 

So please be encouraged to do your own research and at the end of the day, if you cannot drill down to what you think is the right choice due to over-hyped and excessive sensational marketing drivel, give us a shot… what have you go to lose?  We make great products.

It’s hard to drive any type of car for very long when there’s a foul odour inside of it. It can also be embarrassing when you have passengers ride along. There are two general methods of making a foul odour go away, you can mask it, (cover it up), or you can permanently remove it.

3D Odour Eliminator is our own unique formula for permanently removing odours. The active enzymes in 3D Odour Eliminator seek out, lock-on to and then destroy odour emitting molecules, which are the root cause of foul scents, smells and stench.

There are scads of odour eliminators on the market today as this has become a popular category. In many cases, whatever brand you purchase, it’s the same product as many other brands, it just marketed and sold under a different label with different names and colors.

3D Odour Eliminator does what all the rest of the competition only claim they can do. Do it right the first time, use 3D Odour Eliminator.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - Odour removing, concentrated bacterial enzyme fogger for eliminating odours inside vehicles, boats, RVs and homes in an aerosol form.

What does it do? - Removes odours, smells, stench and scents. Proprietary active bacterial enzymes in 3D Odour Eliminator seek out, lock-on-to and then destroy odour emitting molecules, which are the root cause of foul scents, smells and stench.

When do you use it? - Anytime you discover an unpleasant odour, smell or scent inside your vehicle that you want to eliminate.

Why use 3D Odour Eliminator over other options? - When you purchase anything from 3D you can trust you’re getting the best quality products that perform as advertised. This means you’ll do the job right the first time with no wasted time or money.

• Removes odors caused by cigarettes, cigars, urine, feces, food, beverage spills, milk, coffee, wet dog, work-out gear, gym clothes, shoes, rancid substances, fire and cooking smoke, mold and mildew.
• Concentrated bacterial enzyme neutralizes odors and leaves a fresh scent.
• Fogger dispersion permeates into all porous surfaces like headliners, carpets and cloth seats and door panels to destroy odor emitting contaminants at the root cause.
• Atomized fine mist fogger penetrates deep into every square inch of your vehicle for total odor removal including the air conditioning ventilation system to permanently remove odors. 
• Easy to use odour bomb – 1 can treats one vehicle.
• Zero residue – safe for any interior – No mess, no clean-up.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.