This is a professional grade panel wipe

Generically these types of products are called panel wipes. As the name implies, you use these types of product to wipe down a panel. The idea being to chemically dissolve and remove any polishing oils or other substances left on the surface of car paint typically after any paint correction steps that have been performed.

Normal steps for a full exterior detail

When it comes to applying a conventional car wax or synthetic sealant, the normal steps include,

1. Wash and dry the car.
2. Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
3. Compound and polish the paint to remove any below surface defects like swirls and scratches.
4. Apply a car wax or synthetic paint coating.

After step 3, you can simply move onto the final step, which is applying a car wax or synthetic paint sealant without doing anything else to the paint. Just apply the wax or sealant, wait for it to dry to a haze, wipe off the dried product and you’re done.

With ceramic paint coatings – there’s an extra step

With a ceramic paint coating there is an EXTRA STEP required before installing the coating and this is the most important step because the product you use must be strong enough to remove any residual polishing oils or other substances but safe enough to prevent dulling or marring the paint.

The normal steps to install a ceramic coating include,

1. Wash and dry the car.
2. Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
3. Compound and polish the paint to remove any below surface defects like swirls and scratches.
4. Use a panel wipe to chemically strip each body panel to prep it for the coating.
5. Install the ceramic coating section by section, panel by panel.

* Step 4 is the extra step. Herein lies the problem.

Clearcoat paints are scratch-sensitive - Generally speaking, modern clearcoat paints tend to be harder than traditional single stage paints like lacquers and enamels used before 1980. While most clearcoat paints are harder than old school paints, they still scratch very easy. And because the clearcoat is like a WINDOW to the color coat, (called the basecoat), any swirls, scratches, scuffs, or towel marring – shows up like a sore thumb. This is because when you scratch something clear, the scratch is opaque or whitish in color and any medium to dark colored basecoats will reflect these whitish scratches back to our eyes making them very easy to see.

Most solvents are not good lubricants - The historic problem with most panel wipe or paint surface prep sprays, are the solvents used to do the actual work of dissolving polishing oils and other foreign substances are NOT good lubricants.

Now let me tie this together - If you take a conventional panel wipe, (a product that’s not a good lubricant), and wipe down a scratch-sensitive clearcoat, it’s really easy and also very common for this process to put towel marring back into the paint you just invested hours into buffing to perfect. In case you don’t know, towel marring is the fluffy way to describe light towel scratches.

See the problem? You need to use a panel wipe to prep the paint for the coating but using the panel wipe risks putting scratches back into the paint.

So, after you've invested hours into doing all the prep work, this includes washing, drying, claying, compounding, and polishing, the paint is now PERFECT – and the next step is to take a panel wipe and scratch the paint. Not good.

Here’s the good news… 3D isn’t no conventional car wax company and 3D WIPE isn’t any old conventional panel wipe. It’s better because 3D’s chemists are the best in the industry.

3D WIPE is a pro-grade product that is formulated to strip the paint without marring the paint at the same time. 3D Wipe is a water-based panel wipe that uses highly refined and filtered water as a base. We use a reverse osmosis process to remove all the total dissolved solids out of the water. Why? Because the water is the foundation for the formula. For cleaning ability, 3D WIPE uses a proprietary blend of surfactants.

3D WIPE is both safe and effective. It’s strong enough to remove any oils or other substances that would interfere with the proper bonding of the 3D Ceramic Coatingto the paint but offers more than enough lubrication to prevent accidental towel marring. Plus – unlike most panel wipes, it’s safe for you, your skin and it smells great too.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - This is a panel wipe, which is a product used to chemically strip a paint surface before installing a ceramic paint coating.

What does it do? - After compounding and polishing paint, or any other surface prep process but before installing the coating.

When do you use it? - After compounding and polishing paint, or any other surface prep process but before installing the coating.

Why use 3D Wipe over other options? - To make sure the paint surface is surgically clean so the coating can make a proper bond for best longevity and performance.

• Water-based solvent safely removes residual polishing oils.
• High lubricity formula helps to prevent accident towel marring.
• Perfectly preps paint for the proper bonding for 3D Ceramic Coating.
• Can be used on paint, glass, plastic, rubber, and metal surfaces.
• Fresh, clean, pleasant scent – no harsh or foul odors.
• The perfect pre-coating prep for 3D Ceramic Coating or any coating.
• Green technology, Earth friendly and biodegradable.
• Prop 65 & V.O.C. compliant.

 The 3D Car Care Bug Remover isn't just another cleaning product; it's a specialized solution designed to tackle even the toughest bug contaminants, residue, sap and more. This powerful bug remover spray is specifically formulated to tackle the toughest bug splatters, ensuring your car's exterior remains pristine and protected.

Our auto bug remover is designed for ease of use, making it an essential addition to your car care routine. Simply spray the product onto the affected areas, let it sit for a few moments, and watch as the advanced formula breaks down and dissolves bug residues effortlessly. The 3D Bug Remover is safe for use on all exterior surfaces, including paint, glass, chrome, and plastic, ensuring a thorough clean without causing any damage.

What sets 3D Car Care's Bug Remover apart is its Eco-friendly composition. We prioritize both performance and environmental responsibility, using biodegradable ingredients that are tough on bugs but gentle on the planet. This car bug remover is not only effective but also safe for you and your vehicle.

Another convenient feature of this bug remover spray is its versatility. You can use it as a quick detailer when on to go or as a pre-soak to loosen up bug remains and other contaminants. Plus, you can easily dilute it with water to reach the exact level of effectiveness you require for a specific project.

Whether you're dealing with a few splatters or a full-on bug invasion, our bug remover spray delivers professional-grade results every time. Perfect for road trips, daily commutes, or post-adventure cleanups, 3D Bug Remover ensures your car looks its best, no matter where the road takes you.

Choose 3D Car Care's Bug Remover for a hassle-free, efficient, and environmentally conscious solution to maintaining your vehicle's appearance. Experience the difference with our top-rated car bug remover and keep your ride looking showroom-ready.

ACA 510 Premium Cutting Compound

• Fastest body shop cutting compound quickly cuts and levels hard clearcoats
• Removes sanding marks and other paint defects and imperfections
• Alpha Ceramic Alumina technology provides true paint correction
• Fresh paint safe, silicone-free, and water based

Cuts the hardest clearcoats fast! 

ACA 520 Finishing Polish

• Fastest body shop safe finishing polish
• Alpha Ceramic Alumina technology provides true paint correction
• Easy clean up, superior finish, no fillers
• Fresh paint safe, silicone-free, and water based

Experience the power of BDX, an acid-free brake dust cleaner and iron oxide remover that quickly eliminates contamination from the surface of your vehicle. This acid-free formula is designed to effectively eliminate iron contamination, brake dust, and fallout and more from your vehicle's surfaces. Whether you're dealing with stubborn iron particles on your paint or brake dust on your wheels, BDX provides a safe and efficient solution.

BDX's gentle yet powerful formulation is completely safe to use on both painted surfaces and wheels, ensuring a perfect finish and professional results. Its easy-to-use application simplifies the decontamination process, allowing you to restore your car's original shine with minimal effort. Simply spray on, let it work its magic, and rinse off to reveal a clean, contaminant-free surface.

Trusted by car enthusiasts and professionals alike, BDX iron oxide remover and brake dust cleaner is the ideal choice for maintaining your vehicle's appearance. Keep your car looking its best and protect your investment with BDX, the reliable and effective solution for iron and brake dust removal. Say goodbye to stubborn contaminants and hello to a pristine finish with BDX.

Ewocar Scrub is a versatile cleaning sponge that provides a gentle but very effective way of cleaning your interior. Stiff nylon bristles reach into surfaces pours and brushes dirt away with ease and unlike melamine sponges, it does not scratch the surfaces. Ewocar scrub provides much better chemical control, cleaning power and is much more efficient than ordinary brushes.

3D Car Care Final Touch is your new go-to quick detailing solution for maintaining that just-detailed look with minimal effort. This quick detail spray is one of the most popular in the car care industry for a reason; trusted by enthusiasts and professionals alike, and known for its incredible ease of use and exceptional results.

Engineered with a high lubricity formula that makes it safe for all surfaces of your vehicle. Quickly clean off light contaminants like dust and fingerprints without worrying about scratches. Final Touch is the perfect choice for maintaining your car between washes.

What sets Final Touch apart is its versatility. Whether you're dealing with paint, glass, chrome, and even interiors, this quick detailer delivers consistent results across all surfaces. It's a must-have tool for anyone who's looking for a quick, effective solution for maintaining that high-gloss look. Final Touch also acts as a super-effective drying aid as well, offering superior protection for a scratch-free car wash.

• Silicone-free detail spray
• Body shop safe formula
• No airborne contaminants around freshly painted vehicles
• Great lubricant spray

3D Spray Detailer is the professional version of our 3D Final Touch in our consumer line of high-quality car detailing products. 3D is not only a supplier of high-quality products to car enthusiasts we also manufacture a complete professional line of products formulated for use in fresh paint environments like collision repair shops, paint and body shops, auto manufacturers and custom body and paint shops.

These types of industries spray fresh paint and as such any products taken into and used in these types of fresh paint environments must be formulated specifically for their needs. 3D Spray Detailer is formulated without the use of silicone or any other ingredients that could contaminate a fresh paint environment yet is works just a great as our 3D Final Touch.

If you work in a body shop and you’re looking for a spray detailer that will remove sanding dust, compound, and polish splatter while at the same time, giving a car that just detailed look, then this is the spray detailer for you.

If you’re a purist when it comes to detailing your own cars, then you’ll love the more pure and dedicated approach the chemists at 3D used when it came to creating a spray detailer so safe it can be used in fresh paint environments.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - Silicone-free, spray-on detailer.

What does it do? - Body shop safe formula adds gloss, slickness and shine while removing light dust, fingerprints, and smudges without contaminating a fresh paint environment.

When do you use it? - Anytime you want to restore that just detailed look to your car. Perfect spray detailer for using in any fresh paint shop environments where contamination is a concern. Works great for removing dust from sanding also compound and polish spatter.

Why use 3D Spray Detailer over other options? - There are a lot of options on the market when it comes to mist-and-wipe spray detailers. What separates 3D Spray Detailer from the rest are the ingredients plain and simple. The chemists at 3D are among the elite best in the world of car detailing chemistry. And here at 3D we never cut corners, we only use the finest chemicals, additives, and raw materials to create unique, high-performance products in every category in our industry.

3D Spray Detailer is at its core, a mist-and-wipe product for removing light dust, fingerprints, and smudges, but this formula goes a lot further than most products in this category. 

Besides providing high lubricity when wiping fresh our cured paint, it’s also formulated without the use of silicones or any other ingredients that can cause paint adhesion issues or fisheyes, so there’s no risk of contaminating a shop. The high lubricity formula makes the paint slick when wiping to reduce accidental marring of the paint and also dries fast with streak-free results.

While it’s accurate to state that it’s formulated for use in fresh paint environments, many hardcore car enthusiast also love this formula because it works so great as well as smells so good, like bubblegum! 

When it comes to detailing cars, most people want the same 4 basic things:

1. Shiny paint.
2. Clear glass.
3. Clean and fresh smelling interior.
4. Black, shiny tires.

It’s really that simple. But when it comes to tires, there are so many tire dressings on the market, and most are incredibly messy, gooey, greasy, and slimy. Plus, they sling onto your lower body panel, don’t last very long and turn your tires into dirt magnet.

When creating a tire dressing, the chemists at 3D don’t start with the dressing, they start with the tire. More specifically, how the rubber is made or formulated to create a tire. Tire rubber formulations are very complex. Think about it, they must endure a LOT of torsional flex, high rpms for hours and thousands and thousands of hard miles. It’s a miracle we get as many miles out of our tires like we do.

Besides tire rubber being complex in its own right, there are multiple tire manufacturers around the world and each company has their own unique tire products, often times very different from their competitors.

The formula for 3D SPEED Dressing was formulated starting with the chemical composition and structural formation for the end results of the tire manufacturing process. The results are a super high gloss, high shine formula that is water-based, while offering the long-lasting features of most solvent and oil-based dressings – but without the mess. Here at 3D, we understand some people like a non-glossy, dark black matte sheen for their tires, but even more people love it when their tires look as though they’re liquid wet with shine. If this describes you, you’re going to love 3D SPEED Dressing.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - Super high gloss, water-based tire dressing.

What does it do? - Gives tires a high gloss, wet-looking deep, dark black shine.

When do you use it? - After first thoroughly cleaning the tires with a dedicated tire cleaner, all-purpose-cleaner or degreaser.

Why use 3D Speed Dressing over other options? - Besides the fact that the formula for this tire dressing is made from the most costly ingredients and fine tuned to the very specific needs and characteristics for tire rubber – here at 3D, we’re car people too and we were just as tired of disappointing tire dressing as everyone else.

• Super high shine, high gloss tire dressing!
• UV protection protects against oxidizing and tire browning.
• Makes any tire look deep, dark black and shiny.
• Non-greasy, non-oily no mess dressing for tires and trim.
• Simple wipe-on, wipe-off application – Fast and user friendly
• Dries to the touch – will not become dirt and dust magnet.
• Waterproof dressing repels rain holds-up to repeated car washing.
• Thick, rich formula penetrates & rejuvenates dull, lifeless looking tires and trim.
• Water-based formula can be used on rubber, vinyl, and even coated leather.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant

• Premium leather, vinyl, and plastic interior car conditioner
• Restores, conditions, and protects leather and trim
• Extends life and appearance
• Great for seats, steering wheels, door panels, and more

What is it? - Multi-purpose conditioner and protectant for leather, vinyl, plastic and rubber surfaces. 

What does it do? - Conditions and protects leather, vinyl, plastic and rubber surfaces.

When do you use it? - After first cleaning the surface, follow-up with an application of the 3D LVP Conditioner to restore, preserve and protect.

Enter the realm of automotive excellence with the 3D GLW Series SiO2 Ceramic Detailer, the quintessential instant detailer that raises the bar to new heights. This extraordinary formula goes beyond traditional detailing, introducing next-level hydrophobic and oleophobic protection. When you apply this instant detailer, you're not just adding a touch of shine; you're creating a fortress of defense against the elements. Water and contaminants will bead up and roll off your vehicle's surface with ease, ensuring that your car remains pristine, even when faced with challenging weather conditions.

But that's not all; the 3D GLW Series SiO2 Ceramic Detailer is also your secret weapon for prolonging the life of your wax, sealant, or ceramic coating. It's a ceramic coating booster spray that doesn't just maintain the existing protective layers; it enhances and extends their longevity. With every application, you're fortifying the surface and clear coat, making them more resilient and durable. The result is a vehicle that not only boasts an undeniable glossy shine but also stands as a testament to your commitment to its long-term well-being. It's more than a detailer; it's a guardian of your car's brilliance and protection.

HYPER GLOSS FINISH GLW Series SiO2 Ceramic Detailer gives your paint an ultimate hyper gloss, deep shine finish while extending the life of your existing car wax, paint sealants, and ceramic coating.

PEAK HYDROPHOBIC PROTECTION Experience the ultimate water-repellent effect with our hydrophobic top coat. Harnessing the power of Silicon Dioxide (SiO2) polymers, water beads up and slides off your car effortlessly, making it easier to maintain a clean and spotless exterior.

CERAMIC COATING BOOSTER Easy spray on and wipe off in seconds. GLW Series SiO2 Ceramic Detailer is safe on paint, glass, wheels, chrome, grills, and trim.

SIMPLIFIED DETAILING ROUTINE Simply spray and wipe off in seconds to reveal a stunning hyper glow finish. By extending the lifespan of your current waxes, sealants, and coatings, this detailing spray saves you time on frequent reapplications.

3D GLW SERIES Experience game changing technology and next level GLW for your ride with our premium products. 3D embodies a transformative lifestyle that reflects what you and your ride represent. Welcome to the ultimate, hyper GLW.

What is it? - Solvent-based, water-proof dressing for tires and all exterior rubber, plastic, and vinyl trim.

What does it do? - Restores a deep, dark black appearance with high a high gloss shine to rubber, plastic and viny.

When do you use it? - After first cleaning the surface via washing and drying or using the appropriate spray-on cleaner.

Why use 3D Magic Blue over other options? - Like all 3D products, this high-performance multi-surface exterior dressing is earth-friendly, biodegradable and V.O.C. compliant. It’s also human-friendly as we want you our customers to be around for a long time.

• Long lasting silicone formula creates a deep, dark black shine.
• Use on any smooth, hard exterior surface.
• For tires, exterior plastic and vinyl trim, moldings, wheel wells, splash guards and other rubber and plastic surfaces.
• Solvent-based instead of water-based, which makes it highly water-resistant – holds up well to inclement weather and repeated washings.
• High-viscosity formulation means lower likelihood to run off tires.
• Easy wipe-on, wipe-off application.
• Keeps tires looking black for weeks, not days.
• No run, no sling formula – keeps your car’s paint clean!

3D Glass Polish is a cerium-oxide based polish designed to remove swirls, scratches, wiper marks, and water spots from automobile glass surfaces. Our unique formula is easy to use requiring minimal elbow grease to apply and wipe off while providing superior ‘like new’ vision and clarity.

Removing orange peel has never been so fast and easy!

Save hours of sanding time and labor by machine sanding while leaving behind a shallow, uniform sanding mark pattern.  Removing orange peel over a single body panel or an entire vehicle is fast with the 3D Flex Sanding Discs. 

The secret is in the Alpha Ceramic Alumina abrasive technology created by 3DProducts.com.  The particle size, shape, hardness, and cut are all engineered and controlled to create a long-lasting sanding disc that cuts fast while leaving a shallow, uniform sanding mark that buffs out fast and easy.

When machine sanding to remove orange peel, surface texture and other paint defects machine sanding with the 3D ACA – Alpha Ceramic Alumina Flex Sanding Discs are safe, fast, and highly efficient.

What is it?

Thin sanding discs for use on an orbital sander.

What does it do?

Quickly and efficiently levels orange peel and other surface texture to create a flatter, more uniform surface ready for compounding.

When do you use it?

On fresh custom paint work to create a show car finish or match factory orange peel.

Why use 3D Flex Sanding Discs over other options?

Great question as there are other options on the market.  There are a number of key features and benefits that make our sanding discs a better choice and a better value.  First the abrasive technology is our own, we made or invented it from scratch including converting the original raw materials into modified raw materials.  So no one else has access to the same abrasive grain technology.  The abrasives are engineered from raw materials to finished product.  The key aspect of having this much control is our ability to determine the size, shape, hardness, cut ability and breakdown time. 

The abrasives are then attached to the thin film using a process that ensure uniform placement over the entire disc.  By controlling the particle size and placement we control the depth of the sanding marks and the pattern of the sanding marks.  The results are a sanding mark pattern that is shallow in depth and even over the entire surface.  This not only means the sanding marks buff out faster and easier it also means you leave more paint on the surface and keep buffing temperature lower.

Our proprietary anti-clogging technology prevents the “cementing” of paint particles onto the face of the sanding disc and this means more cutting with less risk of pigtails.  Of course you must clean the face of the disc often, but any paint particles remove easily instead of impaction onto the disc in a way they are difficult if not impossible to remove.  In real world testing on average paint hardness, you can expect to use one disc to sand one body panel.  There are exceptions to both extremes, on some paint you may get less than a panel, (really hard paint with excess orange peel), or two body panels for softer paint less orange peel.  Because topcoat hardness is always an unknown variable, we don’t make specific claims but let the overall performance of our products do the talking.

The 3D Car Care Ceramic Coating Kit is your solution for achieving professional-level protection and shine from the comfort of your own garage. This high-performance 9H ceramic coating not only enhances the aesthetic appeal of your vehicle but also provides a robust layer of protection against various environmental threats.

Formulated with advanced technology, the 3D Ceramic Coating bonds to your paint, creating a durable shield that lasts up to two years. This barrier is resistant to UV degradation, which means less fading and oxidation over time. It also repels water and oils, ensuring that your vehicle stays cleaner for longer and is easier to wash.

The hydrophobic effect of the coating means that water beads up and slides off the surface, dramatically reducing the likelihood of water spots and etching from acidic contaminants. Additionally, the coating provides resistance against chemicals, making it harder for substances like bird droppings and tree sap to damage the paint.

Applying the ceramic coating is straightforward, thanks to the comprehensive kit provided. It includes everything you need to ensure a smooth application, from the coating itself to application pads and cloths. Whether you’re a seasoned pro or a first-timer, the 3D Car Care Ceramic Coating Kit makes it easy to achieve a flawless finish.

Invest in the 3D Car Care Ceramic Coating Kit for a stunning, protected finish that not only looks great but also preserves the integrity and value of your vehicle.

We all love different scents and aromas for the inside of cars, trucks, SUVs, RVs, boat cabins, aircraft, homes, offices, and shops. And there are THOUSANDS of assorted brands for air fresheners on the market.

Here at 3D our air fresheners are different because we make them to be 100% safe for both humans and pets. Think about it? The function of an air freshener is to be taken in via your nose where your sense of smell can detect and appreciate the scent.

If you do not breathe the air freshener inside of you – you will not enjoy it… therefore it’s common sense you need to breathe-in the scent or to be very specific – in order to enjoy any air freshener, you need to breathe in the molecules that make-up the scent or aroma in the air freshener.

Think about it – if you are going to BREATHE in an air freshener – don’t you want it to be SAFE for your lungs and your entire being? Of course you do.

Many air freshener products use artificial sources, including artificial chemicals to provide the scent or smell for their air freshener. And yes, some of these are toxic, cancer—causing and straight-out dangerous to breathe into your body. Don’t self-poison yourself, your family members, your friends, employees or even your pets. Choose 3D brand air fresheners in a variety of different scents and trust and take comfort knowing your health and safety is above cutting costs and making profits at your peril.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - All-natural air freshener where the scent is derived from 100% organic aromatic oils.

What does it do? - Creates a wonderful, fresh, SAFE scent that is pleasing to smell while also being completely safe for humans and pets.

When do you use it? - Anytime you want to create a pleasant-smelling environment inside a car, truck, SUV, RV, boat cabin, aircraft, home, business, shop, or bathroom facilities.

Why use 3D New Car Scent over other options? - Because it’s completely safe to breathe this product into your body after it’s been atomized into a fine particulate spray. Besides being safe - it smells great!

• Inviting, new car scent air freshener restores that new car scent!
• New Car Scent is derived from all-natural organic aromatic oils!
• Long lasting non-toxic formula safe for humans and pets.
• Water-based, non-staining odor eliminator.
• All 3D air freshener scents are derived from safe, all-natural sources.
• Zero toxic or cancer-causing ingredients or scents.
• Use in cars, trucks, SUVs, RVs, boat cabins, aircraft, homes, offices, and shops.
• OSHA compliant spray bottle – protects you from fines.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

• Deep gloss Carnauba wax
• UV protection for dark paint colors
• Provides long lasting paint protection and high gloss shine
• Easily apply with soft foam applicator

3D Cherry Wax works great and smells great. Just as important, it wipes off super easy! The last thing you want when waxing your pride and joy is a car wax that is frustrating to remove. 3D Cherry Wax almost falls off the paint when you rub a microfiber towel over the surface it’s that easy to remove. AND – it leaves your car’s finish feeling incredibly slick and slippery, which everyone loves.

3D Cherry Wax is a non-cleaning wax, this means it’s formulated to provide nothing but protection, gloss, and shine. For this reason, it should only be used on paint in new or like new condition, for example brand new cars or cars that have just been washed, clayed, and polished. 

3D Cherry Wax is categorized as a Show Car Wax or Finishing Wax because its pure protection and gloss with no cleaning ability. After washing and drying your car, simply apply a thin coat by hand or with any orbital polisher. Wait for 10 to 15 minutes for the wax to dry to a haze and then remove using a clean, soft microfiber towel. The results will amaze you and like so many other people, you’ll be a fan of 3D Cherry Wax.

What is it? - A show car or finishing wax made from a blend of natural carnauba wax plus synthetic polymers.

What does it do? - Protects the paint while creating a deep, wet shine that feels slick and slippery to the touch.

When do you use it? - After first washing and drying your car.

Why use 3D Cherry Wax over other options? - The best reason to use 3D Cherry Wax over other options in this category is because it’s fast and easy to apply and the results will make you think it should have cost more money. Seriously, when it comes to liquid hybrid waxes, nothing applies as fast or wipes-off as easy as 3D Cherry Wax. The reason why is because we formulated it for these specific characteristics. 

Like you, we wanted a liquid wax that would create the warm glow of traditional carnauba wax with extended shine and protection like you get from a dedicated synthetic paint sealant. The results from our chemists who do all the formulating and testing in-house here at 3D in Santa Clarita, California are inside the bottle of Cherry Wax.

Besides being fast and easy to apply and remove, 3D Cherry Wax does everything you’re looking for in a liquid, non-cleaning wax and this is incredible shine, gloss, and slickness. Plus, zero dusting and it will not stain plastic trim white.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

• Hybrid blend of carnauba wax and synthetic polymers
• Fast, easy application and removal by hand or machine.
• Creates a deep, wet, high gloss shine.
• Leaves paint feeling slick and slippery.
• Protects against the elements, airborne pollution, industrial fallout, dirt, dust, pollen.
• Works great on all colors and especially dark colors like black, red, blue etc.

3D’s wool cutting pads with rotary polishers are the fastest and most efficient pad and tool combo for removing sanding marks, deep swirls, scratches, oxidation, and water spots. The fibers of wool cutting pads are forms of abrasives. These fiber abrasives offer their own dedicated cutting ability. Together with the abrasives in your choice of 3D compound, you now have to types of abrasives cutting for you and this is powerful. 

The rotary polisher, because it’s single direction, direct driver or gear-driven tool means zero pad stalling. So the fastest and most time-efficient way to remove sanding marks or other serious and deep paint defects is with a 3D wool pad, a 3D compound, and a rotary polisher.

What is it?
High performance lambswool cutting pad for use with rotary polishers.

What does it do?
When used with 3D compounds and polishes, the 3D lambswool cutting pad removes sanding marks and other deep paint defects like, swirls, scratches, water spots and oxidation.

When do you use it?
Typically lambswool cutting pads are used as the first paint correction step after sanding. They are also the first step in a multiple-step paint correction process to remove or level deep swirls, scratches, water spots and oxidation. Any wool pad step should always be followed with a foam pad step to ensure there are no holograms left behind from the fibers of the wool pad.

Why use 3D’s White Lambswool Cutting Pads over other options?
The 3D white lambswool cutting pad is a premium cutting pad. We only use the finest lambswool from sheep sheered in Australia. The sheered lambswool undergoes multiple processes step to create the perfect all-natural lambswool cutting pad.

Because of our proprietary treating process, our lambswool pad will also outlast all other wool cutting pads. And because of the uniform pile resulting from the complex treatment process, our lambswool pads will leave a more shallow hologram pattern than other wool pads.

Plus because of the proprietary treatment process, our pads are non-linting and don’t shed like conventional traditional wool pads, so they are cleaner for your shop and the process.

Unlike most tire dressings, also called tire shines on the market, this tire shine was formulated to be fun and easy to use, not greasy and messy to use. The chemists at 3D are like you, that is, they don’t want a greasy, sticky mess on the sides of their tires, they simply want them to look fantastic with a deep, dark black shine. 

3D Tire Shine is a thick, rich water-based gel, it offers a very clean application without any sloppy drips or smears to deal with after the fact. Simply wipe on and massage into the tire sidewall and then allow to dry. For even more shine, wait a few minutes and apply a second, thin light application and allow this second application to dry before driving. Your tires will look amazing without becoming an oily, greasy dust-magnet that will be a pain to clean the next time you wash your car.

What is it? - Water-based tire and trim dressing.

What does it do? - Restores a high gloss shine to rubber and vinyl surfaces.

When do you use it? - After first cleaning the surface to be treated.

Why use 3D Tire Shine over other options? - This multi-purpose tire shine is water-based and non-greasy, and this makes it a pleasure to use. It works like any silicone, solvent or oil-based dressing without the greasy, oily mess. You can control the gloss and shine level by the amount of product you apply. For a super high gloss, high shine finish, apply a second coat. For a low gloss matte finish, apply only one application and then wipe the tire sidewall to remove any excess and dampen down the shine.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

• Long lasting, water-based tire dressing.
• Provides excellent UV protection from sun.
• Creates a high shine, high gloss finish.
• Can also be used to dress wheel wells.
• Non-greasy, non-oily – won’t turn tires into dust magnets.
• Easy gel-application means no overspray on wheels or body panels.
• Apply using tire swipe, foam or microfiber applicator of paint brush.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

Directions

IMPORTANT: Always work on a cool clean surface in the shade. Thoroughly clean tires first. The key to great results for any tire dressing or tire shine starts with clean tire sidewalls.

Step 1: Apply an ample amount of 3D Tire Shine directly onto the tire sidewall and then using a tire brush, (quality paint brush), spread the product evenly over the sidewall. You can also use a foam tire swipe or foam or microfiber applicator pad.

Step 2: Lightly wipe tire sidewall to remove any excess 3D Tire Shine if needed. Allow 3D Tire Shine to fully dry before driving.

Repeat this process to the of the tire sidewalls.