This Ultimate Car Wash Kit is the perfect starter pack for washing and cleaning the outside and inside of your car!

Whether you are new to car washing or are a Weekend Warrior, this bundle conveniently has everything you are looking for in one place.

Go ahead and grab all these great items with one easy click - you’ll thank us later!

What’s Included? £140 worth of products!!

- LVP Cleaner (473ml)

- Final Touch (473ml)

- Chillin Cherry Air Freshener (473ml)

- Pink Car Soap (473ml)

- Glass Cleaner (561ml Aerosol)

- GLW Series Wheel & Tire Cleaner (473ml)

- Tire Shine (473ml)

- 320GSM Microfibre 40 x 40 (3 Pack) 

- Interior Scrub Pad

- Wash Mitt

- Wheel Woolie

- 3" Applicator Pad

- 16L Black Wash Bucket & Grate

Ultra Protectant is a high quality, long lasting, water-based, UV resistant protectant with a high gloss shine. Use it on tires and in wheel wells.

This spray-on formula also protects and beautifies exterior vinyl surfaces. Ultra Protectant is the perfect protection to dress tires Ultra Protectant protects tires and exterior trim from the sun’s damaging UV rays and penetrates the rubber and vinyl for Ultra Protectant conditioning.

Water-based Ultra Protectant is VOC, Green, and Biodegradable.

Directions:

Spray Ultra Protectant on tires, trim and wheel wells and get hundred percent coverage.

Wipe off paint or rims and just leave to dry, if you want a high gloss shine.

If you prefer a stain or low gloss shine, wipe off Ultra protectant after a few minutes.

That’s all there is to condition and protect your tires, exterior trim, and wheel wells.

• Weight: 400 GSM
  
• Material: 100% microfiber (80% polyester, 20% polyamide)
• Size: 40 x 40 cm
• Two pieces in pack – in Orange and Blue colors
• Laser cut edges

Ultra soft and do not leave any scratches or fabric lint,  two sides, short pile side is perfect for coatings, polishes wipe off and the long pile side is for buffing. Suitable for glass cleaning or interior cleaning and dressing.

• High foam stain remover and odor eliminator
• Optical brighteners bring back original beauty and texture
• Fresh lemon scent leaves your carpet and upholstery looking new and smelling delicious
• Great for use by hand with a brush and water

Overview

• ONE EASY STEP … 3D Upholstery & Carpet Shampoo cleans and deodorizes carpet, upholstery and more with one simple step!
• HIGH FOAM … Our premium high foaming formula is tough on spots and stains, providing the ultimate deep clean!
• ORIGINAL BEAUTY … The optical brighteners work to bring back the original beauty and texture from the surface for a 'like new' look and feel!
• FRESH LEMON SCENT … Leave your carpet and upholstery clean, beautiful, and full of our refreshing lemon scent!
• PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a carpet and upholstery cleaner that's tried and trusted.

Description

The science behind why you want a high foaming upholstery and carpet shampoo

One of the reasons everyone enjoys buying a brand-new car is because it’s new, meaning the outside is clean and shiny and even more noticeable - the inside is so clean and sterile. No one else has soiled the seats, the arm rests, the steering wheel, the center console, or the carpets. Part of the reason the inside of a brand-new car feels luxurious is because it’s so fresh and clean. It’s a universal phenomenon that people from all walks of life, describe a new car as having that new car smell. And this is because – everything is still spic-and-span clean, kind of like an operating room in a hospital – everything looks and smells surgically clean. 

It’s this clean factor, this overpowering perception that the inside of a new car is 100% completely clean and germ-free that makes getting into a new car so inviting, so welcoming. You want to get inside of a brand-new car because you know it’s so clean.

Sad news is, we can’t all simply go down to the dealership and buy a new car just because the inside of our current car loses that new car smell and starts to show signs of normal, day-in, day-out wear-n-tear.

What we can do is clean it. And the parts or areas of a car that get the dirtiest are any part or area that is made from some type of fabric, upholstery, or carpeting. Cleaning fabric, upholstery or carpeting is challenging because unlike smooth hard surfaces, where the dirt and grime is sitting on the surface and easy to wipe-off, with fabric, upholstery or carpeting, the dirt and grime can be both on the material and in the material. 

Another difficult aspect of cleaning fabric, upholstery or carpeting is once any liquids penetrate past the outer surface, or get behind or under the surface of the material being cleaned – how do you then remove any excess moisture? You need to remove any liquids or moisture, or this can lead to the formation of mold and mildew where you cannot see it or reach it to clean it.

This is why we made 3D’s Upholstery & Carpet Shampoo to be a high foaming cleaner. Foam is basically suds or bubbles. Bubbles are the product (a liquid) enveloped around pockets of air and it is these foam bubbles that sit on TOP of the surface where you want them so you can work them against the surface of the material and then wipe-off the residues.

This simple foam structure of the cleaner helps you to effectively clean the material while avoiding getting too much liquid into whatever is behind the surface of the fabric, upholstery, or carpeting.

In the case of cloth seats, there is foam cushioning under the top layer of fabric. Foam absorbs liquids. If you put a straight liquid cleaner on to the surface of a cloth-covered foam seat, a lot of the liquid will saturate past the cloth surface and go into the foam. Now the problem becomes, how can you get this liquid it out? Unremoved liquids are what can lead to mold and mildew issues inside your car’s seats. This same principal applies to carpets and even cloth-covered door panels, arm rests or center consoles.

When it comes to cleaning any type of fabric by hand – you want a high foaming cleaner so the cleaner will sit on the top surface. And that’s the science behind 3D’s high foaming Upholstery & Carpet Cleaner.

Besides the high foaming feature, 3D’s Upholstery & Carpet Cleaner uses 3D’s green technology to create a wide-spectrum cleaner that can tackle just about any dirt, grime, or stain that’s common to car interiors. This wide-spectrum cleaner also includes a proprietary bacterial enzyme, which completely eliminates foul odors, not just mask them over cover them up. 

And to really add some zing to the clean, we included what are known in chemistry jargon optical brighteners. These optical brighteners working with the cleaners, restore a crisp, richness-of-color to the pigments and dyes used to give your car it’s unique color scheme. 

And 3D’s chemists didn’t stop there, they also made sure this product leaves a residue-free surface to avoid future dirt build-up. 

If you want your car’s interior to look, feel and smell like a brand-new car, use 3D’s Upholstery & Carpet Cleaner to hand-clean any cloth, fabric, carpet, or upholstery. You can even use it to wipe down hard, non-absorbing surfaces like vinyl and modern coated leather.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - Foaming upholstery, fabric, and carpet cleaner

What does it do? - Cleans carpet, fabrics, and upholstery by removing ground-in dirt, grime, food stains, liquid spills, pet stains, cosmetic stains, skin lotions stains and body oils.

When do you use it? - After first thoroughly vacuuming and removing any loose dirt and debris out of weave of fabrics, carpeting and textiles.

Why use 3D Upholstery & Carpet Shampoo over other options? - This high foaming carpet and upholstery cleaner keeps the cleaning foam on the surface where you want it, not simply soaking and saturating into and under the surface where you don’t want it. Powerful cleaning agents, optical brighteners, and bacterial enzyme odor eliminators clean while restoring a factory new bright appearance with a residue-free, fresh lemon scent.

Diluting 3D Upholstery & Carpet Cleaner

3D’s Upholstery & Carpet Cleaner is sold as a concentrate. Before using this product, you must dilute it. The dilution ratio for general cleaning is a ratio of 1:16 – or 1 part concentrate to 16 parts water. The number 16 in the expressed ratio is the ratio number.

Dilution Formula

When using U.S. Standard ounces as our unit of measure, a dilution formula is expressed like this, Final volume divided by ratio number = ounces to add to final volume container.

Dilution for a 32-ounce spray bottle

To figure out a dilution level to make a 32-ounce bottle of ready-to-use product, here’s the formula. 32 divided by ratio number = number of ounces to add to 32-ounce bottle. To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 32 divided by 16 = 2 ounces per 32-ounce bottle.

Dilution for a 1-gallon jug

Using the same above formula, only substituting 128 ounces for 32 ounces but still using 16 as the ratio number, the dilution equation would look like this, 1-gallon = 128 ounces. 128 divided by ratio number = ounces per gallon.

To correctly mix 3D’s Upholstery & Carpet Cleaner at a ratio of 1:16 the equation would look like this, 128 divided by 16 = 8 ounces per gallon.

In simple terms, using a clean, 1-gallon mixing container, you add 8 ounces of upholstery & carpet cleaner concentrate and then fill the rest of the container with clean water and mix thoroughly. This will make 1-gallon of ready-to-use upholstery & carpet cleaner at a 1:16 dilution ratio.

Next you will want to pour this mixture into a clean spray bottle. To create a thick foam, you’ll also want a foaming spray head. A normal spray head will not work as well as a foaming spray head.

• High foaming formula stays on top of surface – less saturation under surface.
• 3D’s proprietary bacterial enzymes completely eliminate foul odors. 
• Optical brighteners restore and enhance original colors.
• Cleans and removes dirt, grime, drink spills, food stains, body oils, pet stains, etc.
• Safe for all fabrics, upholstery, and carpets – even vinyl and coated leather.
• Concentrated formula – One 16-ounce bottle makes 2 gallons of RTU product
• Customer pleasing, fresh lemon scent leaves zero residues behind.
• Hypo allergenic – won’t cause allergic reactions – formulated for use by hand.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

Directions

IMPORTANT: Always work on a cool surface in the shade.

Professional Technique Tip – Dry Extraction - Always start by vacuuming any upholstery or carpet to be cleaned. This is called dry extraction. The idea is to remove as much of any loose dirt possible by lifting it out of or off of the surface. By removing dry, loose dirt first – you don’t risk liquefying this dirt with your spray liquid cleaner and then having to remove it. It’s easier, faster, and more effective to remove loose dirt via air extraction or even via blowing out the fabric, carpet, or upholstery with compressed air than it is to remove it once it’s wet.

Step 1: After vacuuming, spray 3D Upholstery & Carpet Cleaner directly onto surface to be cleaned and immediately scrub the surface with a horsehair or textile brush. 

Step 2: Use a clean, absorbent cotton terrycloth towel or absorbent microfiber towel and wipe and blot the cleaner and any emulsified dirt off of and/or out of the surface. Repeat this step switching to a fresh, dry towel often to absorb and remove as much residue as possible.

Step 3: Re-vacuum surface to lift out any remaining residues and then give the surface a final wipe with a dry towel.

Step 4: After all interior surfaces have been cleaned, wiped and/or blotted dry, place an air mover, or fan inside car and turn to the highest setting. Roll windows down about 1 inch so the air mover or fan can circulate air in and out of the car to evaporate and remove any remaining moisture. Run fan for at least one hour in normal ambient temperatures and humidity. Longer for colder, moist climates.

 Use confidently to restore, renew, and rejuvenate automotive vinyl, plastic and carpets. Easy to blend into faded fiber areas of carpets. Covers and conceals carpet blemishes. Works great on carpets and mats that are just too stained to come perfectly clean.

Permanent: won't crack, split, peel or rub off

Use to restore or change original colour

Features

• pH balanced car wash soap with wax protection
• Easy rinse formula cleans without stripping wax, sealants, or coatings from surface
• High foam suds provide a deep clean without scratching or damaging the paint
• Great weekly maintenance car wash soap

• WASH AND PROTECT … 3D Wash N Wax is a premium pH balanced car wash shampoo with wax components that work to add an extra layer of protection to your paint job!
• NO STRIP ZONE … Our pH balanced formula is great to maintain recently waxed vehicles without stripping wax or sealant coatings from the surface!
• EASY RINSE … 3D Wash N Wax is highly concentrated with high foam suds while also being super easy to rinse away without scratching or damaging the paint!
• PERFECT FOR EVERY WEEK … 3D Wash N Wax is a great weekly car wash soap that protects your paint while adding a mirror high gloss shine so you can ride in style every weekend!
• PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience Wash N Wax car wash soap that's tried and trusted. 

Description

 - White Microfibre Applicator Pad

- 10cm x 12cm

- 5 Pack

• Premium ceramic coating surface prep
• Removes excess oils, lubricants, and residue from paint prior to applying ceramic coating
• Strengthens bind between paint and ceramic coating layer for longer lasting protection
• Simply spray and wipe small surface areas for proper preparation

This is a professional grade panel wipe

Generically these types of products are called panel wipes. As the name implies, you use these types of product to wipe down a panel. The idea being to chemically dissolve and remove any polishing oils or other substances left on the surface of car paint typically after any paint correction steps that have been performed.

Normal steps for a full exterior detail

When it comes to applying a conventional car wax or synthetic sealant, the normal steps include,

1. Wash and dry the car.
2. Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
3. Compound and polish the paint to remove any below surface defects like swirls and scratches.
4. Apply a car wax or synthetic paint coating.

After step 3, you can simply move onto the final step, which is applying a car wax or synthetic paint sealant without doing anything else to the paint. Just apply the wax or sealant, wait for it to dry to a haze, wipe off the dried product and you’re done.

With ceramic paint coatings – there’s an extra step

With a ceramic paint coating there is an EXTRA STEP required before installing the coating and this is the most important step because the product you use must be strong enough to remove any residual polishing oils or other substances but safe enough to prevent dulling or marring the paint.

The normal steps to install a ceramic coating include,

1. Wash and dry the car.
2. Clay the paint if there are any above surface bonded contamination detected via the Baggie Test.
3. Compound and polish the paint to remove any below surface defects like swirls and scratches.
4. Use a panel wipe to chemically strip each body panel to prep it for the coating.
5. Install the ceramic coating section by section, panel by panel.

* Step 4 is the extra step. Herein lies the problem.

Clearcoat paints are scratch-sensitive - Generally speaking, modern clearcoat paints tend to be harder than traditional single stage paints like lacquers and enamels used before 1980. While most clearcoat paints are harder than old school paints, they still scratch very easy. And because the clearcoat is like a WINDOW to the color coat, (called the basecoat), any swirls, scratches, scuffs, or towel marring – shows up like a sore thumb. This is because when you scratch something clear, the scratch is opaque or whitish in color and any medium to dark colored basecoats will reflect these whitish scratches back to our eyes making them very easy to see.

Most solvents are not good lubricants - The historic problem with most panel wipe or paint surface prep sprays, are the solvents used to do the actual work of dissolving polishing oils and other foreign substances are NOT good lubricants.

Now let me tie this together - If you take a conventional panel wipe, (a product that’s not a good lubricant), and wipe down a scratch-sensitive clearcoat, it’s really easy and also very common for this process to put towel marring back into the paint you just invested hours into buffing to perfect. In case you don’t know, towel marring is the fluffy way to describe light towel scratches.

See the problem? You need to use a panel wipe to prep the paint for the coating but using the panel wipe risks putting scratches back into the paint.

So, after you've invested hours into doing all the prep work, this includes washing, drying, claying, compounding, and polishing, the paint is now PERFECT – and the next step is to take a panel wipe and scratch the paint. Not good.

Here’s the good news… 3D isn’t no conventional car wax company and 3D WIPE isn’t any old conventional panel wipe. It’s better because 3D’s chemists are the best in the industry.

3D WIPE is a pro-grade product that is formulated to strip the paint without marring the paint at the same time. 3D Wipe is a water-based panel wipe that uses highly refined and filtered water as a base. We use a reverse osmosis process to remove all the total dissolved solids out of the water. Why? Because the water is the foundation for the formula. For cleaning ability, 3D WIPE uses a proprietary blend of surfactants.

3D WIPE is both safe and effective. It’s strong enough to remove any oils or other substances that would interfere with the proper bonding of the 3D Ceramic Coatingto the paint but offers more than enough lubrication to prevent accidental towel marring. Plus – unlike most panel wipes, it’s safe for you, your skin and it smells great too.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - This is a panel wipe, which is a product used to chemically strip a paint surface before installing a ceramic paint coating.

What does it do? - After compounding and polishing paint, or any other surface prep process but before installing the coating.

When do you use it? - After compounding and polishing paint, or any other surface prep process but before installing the coating.

Why use 3D Wipe over other options? - To make sure the paint surface is surgically clean so the coating can make a proper bond for best longevity and performance.

• Water-based solvent safely removes residual polishing oils.
• High lubricity formula helps to prevent accident towel marring.
• Perfectly preps paint for the proper bonding for 3D Ceramic Coating.
• Can be used on paint, glass, plastic, rubber, and metal surfaces.
• Fresh, clean, pleasant scent – no harsh or foul odors.
• The perfect pre-coating prep for 3D Ceramic Coating or any coating.
• Green technology, Earth friendly and biodegradable.
• Prop 65 & V.O.C. compliant.

• 8 mm polishing stroke, positive-action drive provides high abrasive power without creating any holograms
• Ideal for tackling the most common surface problems through to finishing without creating any holograms
• Low heat generation on the surface makes it ideal for temperature-sensitive paints
• Brushless motor with greater efficiency and a longer service life
• Continuous speed control trigger: for a gentle start and a lock-on for continuous operation
• Electronic management system (EMS) protects the machine, extends the service life, and increases efficiency
• Flat gear head reduces distance to the surface. The machine can therefore be operated safely in any position.
• Counterweight for smoother operation
• Cushioned special hook and loop pad for polishing.
• Grip hood: ergonomically shaped with SoftGrip. The machine can be controlled with precision and is always comfortable yet secure to hold.
• Optimised air flow for optimum cooling of motor and gear. No annoying exhaust air for the user
• LED battery capacity display
• FLEX battery system: suitable for all FLEX 18,0 V battery packs. Delivery does not include battery and charger

• 15 mm orbit for high efficiency
• Free-spinning drive for hologram-free finishing
• Low heat generation on the surface makes it ideal for temperature-sensitive paints
• Brushless motor with greater efficiency and a longer service life
• Continuous speed control trigger: for a gentle start and a lock-on for continuous operation
• Electronic management system (EMS) protects the machine, extends the service life, and increases efficiency
• Flat gear head reduces distance to the surface. The machine can therefore be operated safely in any position.
• Counterweight for smoother operation
• Cushioned special hook and loop pad for polishing.
• Grip hood: ergonomically shaped with SoftGrip. The machine can be controlled with precision and is always comfortable yet secure to hold.
• Optimised air flow for optimum cooling of motor and gear. No annoying exhaust air for the user
• LED battery capacity display
• FLEX battery system: suitable for all FLEX 18,0 V battery packs. Delivery does not include battery and charger

• 12 mm orbit for high efficiency
• Free-spinning drive for hologram-free finishing
• Low heat generation on the surface makes it ideal for temperature-sensitive paints
• Especially suitable into the spot-repair area and for difficult shapes. Ideal auxiliary for larger polishers
• Powerful 700 watt motor with highly-efficient ventilator for optimum cooling
• Optimised air flow for optimum cooling of motor and gear. No annoying exhaust air for the user
• VR microprocessor control: with tachogenerator constant speed control, soft start, restart protection after power failure, overload protection, temperature monitoring and speed selection
• Flat gear head reduces distance to the surface. The machine can therefore be operated safely in any position.
• Counterweight for smoother operation
• Cushioned special hook and loop pad for polishing.
• Grip hood: ergonomically shaped with SoftGrip. The machine can be controlled with precision and is always comfortable yet secure to hold.
• With rubberised resting bar for safe setting down

• 15 mm orbit for high efficiency
• Free-spinning drive for hologram-free finishing
• Low heat generation on the surface makes it ideal for temperature-sensitive paints
• Powerful 710 watt motor with highly-efficient ventilator for optimum cooling
• Optimised air flow for optimum cooling of motor and gear. No annoying exhaust air for the user
• Continuous speed control trigger: for a gentle start and a lock-on for continuous operation
• VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection
• Flat gear head reduces distance to the surface. The machine can therefore be operated safely in any position.
• Counterweight for smoother operation
• Cushioned special hook and loop pad for polishing.
• Grip hood: ergonomically shaped with SoftGrip. The machine can be controlled with precision and is always comfortable yet secure to hold.
• With rubberised resting bar for safe setting down
• 4 metres PUR H05-BQF cable: wear-resistant, flexible and highly resistant to cuts and abrasions