FlexiWool has more cutting power and more flexibility due to Burgundy foam interface which allows to reach much better results on concave areas. This pad is perfect choice for cutting stage combined with Ewocar Heavy Cut polishing compound.
Proudly manufactured & blended in the USA with premium raw materials.
Sort by:
35 products
35 products
The spider-cut design in these pads offer many benefits such as; reduced heat, longer working times & long lasting.
There’s a lot of chemistry and physics that go into the design of a quality foam pad. 3D’s quality foam buffing pads use the latest in foam chemistry to create pads that simply outperform the competition.
3D’s 5.5” light purple medium polishing pads are versatile because they offer light cutting, medium polishing and even fine finishing simply by changing the product.
For a fine finish try using this pad with ACA 520, AAT 502 or Speed.
For light cutting try this pad with ONE, AAT 501 or AAT 505 Correction Glaze.
For medium cutting try this pad with ACA 500 or ACA 510.
There’s a lot of chemistry and physics that go into the design of a quality foam pad. 3D’s quality foam buffing pads use the latest in foam chemistry to create pads that simply outperform the competition.
3D’s 5.5” light purple medium polishing pads are versatile because they offer light cutting, medium polishing and even fine finishing simply by changing the product.
For a fine finish try using this pad with ACA 520, AAT 502 or Speed.
For light cutting try this pad with ONE, AAT 501 or AAT 505 Correction Glaze.
For medium cutting try this pad with ACA 500 or ACA 510.
There’s a lot of chemistry and physics that go into the design of a quality foam pad. 3D’s quality foam buffing pads use the latest in foam chemistry to create pads that simply outperform the competition.
3D’s 5.5” dark purple heavy cutting pads are versatile because they offer medium & heavy cutting depending on what product you choose.
For medium to heavy cutting try with our 3D ONE
For Heavy cutting try with our ACA 510 Premium Cut Compound
The spider-cut design in these pads offer many benefits such as; reduced heat, longer working times & long lasting.
There’s a lot of chemistry and physics that go into the design of a quality foam pad. 3D’s quality foam buffing pads use the latest in foam chemistry to create pads that simply outperform the competition.
3D’s 5.5” light purple medium polishing pads are versatile because they offer light cutting, medium polishing and even fine finishing simply by changing the product.
For a fine finish try using this pad with ACA 520, AAT 502 or Speed.
For light cutting try this pad with ONE, AAT 501 or AAT 505 Correction Glaze.
For medium cutting try this pad with ACA 500 or ACA 510.
Excellent finishing range
3D’s 5.5” black finishing pads are versatile because they offer very light polishing to very fine finishing simply by changing the product. To get light cutting or the ultimate flawless finish, use with 3D’s 502, 520, ONE or SPEED.
Best value
These pads offer a great range of polishing options, and the foam is extra durable. 3D’s buffing pads don’t cost more money, they make you more money.
Versatile
Our 5.5” black spider-cut finishing pads work great on any type of polisher including rotary, long stroke polishers, short stroke polishers, free spinning polishers, and gear-driven polishers.
There’s a lot of chemistry and physics that go into the design of a quality foam pad. 3D’s quality foam buffing pads use the latest in foam chemistry to create pads that simply outperform the competition.
3D’s 6.5” dark purple heavy cutting spider pads are versatile because they offer medium & heavy cutting depending on what product you choose.
The spider-cut technology adds benefits like reduced heat, longer working times & longer lasting pads.
For medium to heavy cutting try with our 3D ONE
For Heavy cutting try with our ACA 510 Premium Cut Compound
For light orange peel removal or for refining P1500 sanding marks
3D P2500 Flex Sanding Discs are super high quality, fine cut sanding discs for use after an aggressive sanding step like our 3D P1500. The P2500 discs quickly refine the P1500 sanding marks to P2500, which then are incredibly fast and easy to remove via compounding.
3D P2500 discs can also be used by themselves to level minor orange peel, match factory orange peel or level minor surface texture.
The secret is in the Alpha Ceramic Alumina abrasive technology created by 3DProducts.com. The particle size, shape, hardness, and cut are all engineered and controlled to create a long-lasting sanding disc that cuts fast while leaving a shallow, uniform sanding mark that buffs out fast and easy.
3D P2500 Flex Sanding Discs leave such a uniform, shallow sanding mark pattern it makes the arduous task of sanding faster and easier as well as makes the compounding step faster and easier.
What is it?
A fine grit sanding discs for use on an orbital sander.
What does it do?
Quickly and efficiently levels orange peel and other surface texture to create a flatter, more uniform surface ready for compounding.
When do you use it?
After first sanding with the 3D P1500 sanding discs to refine the P1500 sanding mark pattern to an even more shallow depth or as a stand-alone sanding process when there’s only minor orange peel to remove. P2500 is also excellent for light sanding on fresh paint to match factory orange peel o adjacent panels or for leveling minor surface texture or minor paint imperfections when P2500 is more aggressive than what’s needed.
Why use 3D P2500 Flex Sanding Discs over other options?
Great question as there are other options on the market. There are a number of key features and benefits that make our sanding discs a better choice and a better value. First the abrasive technology is our own, we made or invented it from scratch including converting the original raw materials into modified raw materials. So no one else has access to the same abrasive grain technology. The abrasives are engineered from raw materials to finished product. The key aspect of having this much control is our ability to determine the size, shape, hardness, cut ability and breakdown time.
The abrasives are then attached to the thin film using a process that ensure uniform placement over the entire disc. By controlling the particle size and placement we control the depth of the sanding marks and the pattern of the sanding marks. The results are a sanding mark pattern that is shallow in depth and even over the entire surface. This not only means the sanding marks buff out faster and easier it also means you leave more paint on the surface and keep buffing temperature lower.
Our proprietary anti-clogging technology prevents the “cementing” of paint particles onto the face of the sanding disc and this means more cutting with less risk of pigtails. Of course you must clean the face of the disc often, but any paint particles remove easily instead of impaction onto the disc in a way they are difficult if not impossible to remove. In real world testing on average paint hardness, you can expect to use one disc to sand one body panel. There are exceptions to both extremes, on some paint you may get less than a panel, (really hard paint with excess orange peel), or two body panels for softer paint less orange peel. Because topcoat hardness is always an unknown variable, we don’t make specific claims but let the overall performance of our products do the talking.
Removing orange peel has never been so fast and easy!
Save hours of sanding time and labor by machine sanding while leaving behind a shallow, uniform sanding mark pattern. Removing orange peel over a single body panel or an entire vehicle is fast with the 3D Flex Sanding Discs.
The secret is in the Alpha Ceramic Alumina abrasive technology created by 3DProducts.com. The particle size, shape, hardness, and cut are all engineered and controlled to create a long-lasting sanding disc that cuts fast while leaving a shallow, uniform sanding mark that buffs out fast and easy.
When machine sanding to remove orange peel, surface texture and other paint defects machine sanding with the 3D ACA – Alpha Ceramic Alumina Flex Sanding Discs are safe, fast, and highly efficient.
What is it?
Thin sanding discs for use on an orbital sander.
What does it do?
Quickly and efficiently levels orange peel and other surface texture to create a flatter, more uniform surface ready for compounding.
When do you use it?
On fresh custom paint work to create a show car finish or match factory orange peel.
Why use 3D Flex Sanding Discs over other options?
Great question as there are other options on the market. There are a number of key features and benefits that make our sanding discs a better choice and a better value. First the abrasive technology is our own, we made or invented it from scratch including converting the original raw materials into modified raw materials. So no one else has access to the same abrasive grain technology. The abrasives are engineered from raw materials to finished product. The key aspect of having this much control is our ability to determine the size, shape, hardness, cut ability and breakdown time.
The abrasives are then attached to the thin film using a process that ensure uniform placement over the entire disc. By controlling the particle size and placement we control the depth of the sanding marks and the pattern of the sanding marks. The results are a sanding mark pattern that is shallow in depth and even over the entire surface. This not only means the sanding marks buff out faster and easier it also means you leave more paint on the surface and keep buffing temperature lower.
Our proprietary anti-clogging technology prevents the “cementing” of paint particles onto the face of the sanding disc and this means more cutting with less risk of pigtails. Of course you must clean the face of the disc often, but any paint particles remove easily instead of impaction onto the disc in a way they are difficult if not impossible to remove. In real world testing on average paint hardness, you can expect to use one disc to sand one body panel. There are exceptions to both extremes, on some paint you may get less than a panel, (really hard paint with excess orange peel), or two body panels for softer paint less orange peel. Because topcoat hardness is always an unknown variable, we don’t make specific claims but let the overall performance of our products do the talking.
This is our dark purple foam cutting pad with a spider cut to help you get some surface down on your polishing. The 3.5 inch format let's you get right up next to the trim and glass. These pads are also handy for working on headlights.
There’s a lot of chemistry and physics that go into the design of a quality foam pad. 3D’s quality foam buffing pads use the latest in foam chemistry to create pads that simply outperform the competition.
3D’s 3.5” dark purple heavy cutting pads are versatile because they offer medium & heavy cutting depending on what product you choose.
For medium to heavy cutting try with our 3D ONE
For Heavy cutting try with our ACA 510 Premium Cut Compound
3D’s wool cutting pads with rotary polishers are the fastest and most efficient pad and tool combo for removing sanding marks, deep swirls, scratches, oxidation, and water spots. The fibers of wool cutting pads are forms of abrasives. These fiber abrasives offer their own dedicated cutting ability. Together with the abrasives in your choice of 3D compound, you now have to types of abrasives cutting for you and this is powerful.
The rotary polisher, because it’s single direction, direct driver or gear-driven tool means zero pad stalling. So the fastest and most time-efficient way to remove sanding marks or other serious and deep paint defects is with a 3D wool pad, a 3D compound, and a rotary polisher.
What is it?
High performance lambswool cutting pad for use with rotary polishers.
What does it do?
When used with 3D compounds and polishes, the 3D lambswool cutting pad removes sanding marks and other deep paint defects like, swirls, scratches, water spots and oxidation.
When do you use it?
Typically lambswool cutting pads are used as the first paint correction step after sanding. They are also the first step in a multiple-step paint correction process to remove or level deep swirls, scratches, water spots and oxidation. Any wool pad step should always be followed with a foam pad step to ensure there are no holograms left behind from the fibers of the wool pad.
Why use 3D’s White Lambswool Cutting Pads over other options?
The 3D white lambswool cutting pad is a premium cutting pad. We only use the finest lambswool from sheep sheered in Australia. The sheered lambswool undergoes multiple processes step to create the perfect all-natural lambswool cutting pad.
Because of our proprietary treating process, our lambswool pad will also outlast all other wool cutting pads. And because of the uniform pile resulting from the complex treatment process, our lambswool pads will leave a more shallow hologram pattern than other wool pads.
Plus because of the proprietary treatment process, our pads are non-linting and don’t shed like conventional traditional wool pads, so they are cleaner for your shop and the process.
- Two sizes – 60×90 cm (24×35 inch) & 40×60 cm (16×24 inch)
Super quality, super absorbent plush drying towel cuts down your drying time and keeps the surfaces of your car streak-free. Simply lay on the vehicle and gently pull across the wet surface.
Excellent finishing range
3D’s 6.5” black spider-cut finishing pads are versatile because they offer very light polishing to very fine finishing simply by changing the product. To get light cutting or the ultimate flawless finish, use with 3D’s 502, 520, ONE or SPEED.
Best value
These pads offer a great range of polishing options, and the foam is extra durable. 3D’s buffing pads don’t cost more money, they make you more money.
Versatile
Our 6.5” black spider-cut finishing pads work great on any type of polisher including rotary polishers, long stroke polishers, short stroke polishers, free spinning polishers, and gear-driven polishers.
This is our Black Foam Polishing pad with a spider cut to help you get some surface down on your polishing. The 3.5 inch format let's you get right up next to the trim and glass. These pads are also handy for working on headlights.
Excellent finishing range
3D’s 3.5” black spider-cut finishing pads are versatile because they offer very light polishing to very fine finishing simply by changing the product. To get the ultimate flawless finish, use with 3D’s 502, 520, ONE or SPEED.
Best value
These pads offer a great range of polishing options, and the foam is extra durable. 3D’s buffing pads don’t cost more money, they make you more money.
Versatile
Our 3.5” black spider-cut finishing pads work great on any type of polisher including rotary polishers, long stroke polishers, short stroke polishers, free spinning polishers, and gear-driven polishers.
Don’t skimp when it comes to towels
Much of the focus for any detailing project is usually placed on products and of course this is important. But the quality of your microfiber towels are just as important. And, when it comes to your car’s paint it’s actually more important. Why? Because everything that touches your car’s finish MUST be clean, soft, and uncontaminated. It takes hours to perform paint correction and only seconds to put scratches back into the paint. Avoid the risk and make sure you have plenty of clean, soft, uncontaminated microfibre towels in your detailing arsenal to keep your car’s finish swirls and scratch-free.
It's also vitally important to have clean laundry hampers or storage containers to store dirty microfibre towels until you’re ready to do your microfibre laundry as well as a clean place to store your microfibre towels after they come out of the dryer and are inspected and folded for future use.
The most common root cause for swirls and scratches in your car’s finish comes from the things that touch the paint and for must of us this means the wash mitts, microfibre towels and drying towels. If you don’t already have a process in place to take care of your microfiber tools – start today. It’s much easier and faster to avoid swirls and scratches because your microfibre towels are clean, soft, plush, and uncontaminated than it does to machine compound and polish your car.
Use 3D Towel Kleen to wash and maintain your towels to get the maximum performance and longevity out of your 3D towel collection.
What is it?
A 80/20 blend of polyester to polyamide microfibre cloth that is an exceptionally soft. These towels are laser-cut so they are edgeless in design to reduce the risk of marring paint. These 400-gram microfibre towels are purpose-designed for buffing off polishes, waxes & paint sealants as well as ceramic paint coatings.
What does it do?
3D microfibre towels safely remove waxes and sealants off car paint more effectively than conventional options like cotton terrycloth bath towels, t-shirts, diapers, and cheesecloth. The microscopic size of the individual filaments excel at both absorbing and adsorbing both liquids and dried films like compound, polish, and wax residues.
When do I use it?
After applying a coat of car wax, synthetic sealant or ceramic paint coating and then waiting for the recommended drying or flash time and then wiping any excess product off the surface. Anytime you need to remove the residues left by compounds, polishes, and all-in-ones.
Why use 3D microfibre towels over other options?
The 3D brand of microfibre towels were specifically sourced with the expectation for offering our customers a premium quality microfibre towel. There are so many cheap microfibre towels on the market and like the old saying goes,
You get what you pay for.
